Redir fail

   #1  

chipuk

Verified VCDS-Lite User
Verified
Joined
Apr 7, 2018
Messages
2
Reaction score
0
Location
UK
VCDS Serial number
C?ID=327941
hi

any idea how i resolve this redir fail

VCDS-Lite Version: Release 1.2
Saturday, 07 April 2018, 16:50:30.


Chassis Type: 8L - Audi A3/S3
Scan: 01,02,03,08,15,16,17,22,35,37,45,55,56,57,75,76

-------------------------------------------------------------------------------
Address 01: Engine Labels: Redir Fail!
Controller: 06A 906 018 AK
Component: 1,8l R4/5V MOTR AT V02
Coding: 04030
Shop #: WSC 06313
VCID: 6BA944AF0A9D
No fault code found.
Readiness: N/A

-------------------------------------------------------------------------------
Address 02: Auto Trans Labels: 01M-927-733.LBL
Controller: 01M 927 733 ER
Component: AG4 Getriebe 01M 3947
Coding: 00000
Shop #: WSC 00000
VCID: 847B8F138703
No fault code found.
 
   #3  

chipuk

Verified VCDS-Lite User
Verified
Joined
Apr 7, 2018
Messages
2
Reaction score
0
Location
UK
VCDS Serial number
C?ID=327941
Is there something in particular you're looking for in that ECU?
It should use use a scheme for MVBs that's pretty much like this:
http://www.ross-tech.com/vag-com/m_blocks/index.html

-Uwe-

just general fault -

it had a very very slight miss when cold but ok when warm

i did a TBA

then looked and saw the redir fail

i didnt notice it before


i assume its still reading any faults its found or do i have to go into each module ?

thanks for your reply
 
   #4  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,902
Reaction score
33,624
Location
USA
VCDS Serial number
HC100001
i assume its still reading any faults its found or do i have to go into each module ?
Correct, it has no bearing on the ability to read fault codes.

-Uwe-
 
Back
Top