Results 1 to 4 of 4

Thread: Redir fail

  1. #1
    Verified VCDS-Lite User
    Join Date
    Apr 2018
    Location
    UK
    Posts
    2
    Post Thanks / Like

    Redir fail

    hi

    any idea how i resolve this redir fail

    VCDS-Lite Version: Release 1.2
    Saturday, 07 April 2018, 16:50:30.


    Chassis Type: 8L - Audi A3/S3
    Scan: 01,02,03,08,15,16,17,22,35,37,45,55,56,57,75,76

    -------------------------------------------------------------------------------
    Address 01: Engine Labels: Redir Fail!
    Controller: 06A 906 018 AK
    Component: 1,8l R4/5V MOTR AT V02
    Coding: 04030
    Shop #: WSC 06313
    VCID: 6BA944AF0A9D
    No fault code found.
    Readiness: N/A

    -------------------------------------------------------------------------------
    Address 02: Auto Trans Labels: 01M-927-733.LBL
    Controller: 01M 927 733 ER
    Component: AG4 Getriebe 01M 3947
    Coding: 00000
    Shop #: WSC 00000
    VCID: 847B8F138703
    No fault code found.

  2. #2
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    22,967
    Post Thanks / Like
    Blog Entries
    1
    Is there something in particular you're looking for in that ECU?
    It should use use a scheme for MVBs that's pretty much like this:
    http://www.ross-tech.com/vag-com/m_blocks/index.html

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  3. #3
    Verified VCDS-Lite User
    Join Date
    Apr 2018
    Location
    UK
    Posts
    2
    Post Thanks / Like
    Quote Originally Posted by Uwe View Post
    Is there something in particular you're looking for in that ECU?
    It should use use a scheme for MVBs that's pretty much like this:
    http://www.ross-tech.com/vag-com/m_blocks/index.html

    -Uwe-
    just general fault -

    it had a very very slight miss when cold but ok when warm

    i did a TBA

    then looked and saw the redir fail

    i didnt notice it before


    i assume its still reading any faults its found or do i have to go into each module ?

    thanks for your reply

  4. #4
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    22,967
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by chipuk View Post
    i assume its still reading any faults its found or do i have to go into each module ?
    Correct, it has no bearing on the ability to read fault codes.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •