Golf MK6 and LED Backup Lights retrofit

I changed the Backup Lights from Standard lights to LED and there is a fault alarm on the board. Is it possible to inhibit these alarms?

Address 09: Cent. Elect. (J519) Labels:. 1K0-937-08x-09.clb
Part No SW: 1K0 937 086 P HW: 1K0 937 086 P
Component: BCM PQ35 M 110 0651
Revision: 00110 AC
Coding: 6F180A3B80212AC4008000C1500007844B010386524D8560648020200040
Shop #: WSC 01357 011 00200
VCID: 3D5FE315A4727AAC33-8068

Subsystem 1 - Part No: 5K1 955 119 Labels: 1KX-955-119.CLB
Component: Wischer 14031 26 0512
Coding: 009795

2 Faults Found:
01518 - Bulb for Back-Up Lights; Left (M16)
010 - Open or Short to Plus - Intermittent
Freeze Frame:
Fault Status: 00101010
Fault Priority: 2
Fault Frequency: 3
Reset counter: 29
Mileage: 81367 km
Time Indication: 0
Date: 2012.08.24
Time: 22:49:46

Freeze Frame:
Term 15 On
Voltage: 14.50 V
ON
ON
Term 50 Off
OFF
ON

01519 - Bulb for Back-Up Lights; Right (M17)
010 - Open or Short to Plus - Intermittent
Freeze Frame:
Fault Status: 00101010
Fault Priority: 2
Fault Frequency: 3
Reset counter: 29
Mileage: 81367 km
Time Indication: 0
Date: 2012.08.24
Time: 22:49:46

Freeze Frame:
Term 15 On
Voltage: 14.50 V
ON
ON
Term 50 Off
OFF
OFF

Please refrain from opening duplicate threads in different sections of the forum. You already got an answer in your other thread.

-Uwe-