The question of whether to use Advanced Measuring Values or Measuring Blocks is a recurring theme over the last few weeks.Use Measuring Blocks, not Advanced Measuring Values. Go to Group 005 and look in Fiield 1.
OK, that doesn't seem right. What does it show when the transmission is cold (ambient temperature)?There's a hill in my neighborhood. If I attach my UltraGauge Blue and drive up and down the hill, the transmission temp gauge I defined moves gradually up and down by 2 degrees F. If I drive the same course with my expensive laptop teetering on the back seat to record a log from my expensive HEX-NET I get the following log: https://docbucketjmb.s3.amazonaws.com/LOG-02-005-xxx-xxx.CSV which pretty much only toggles between 68C and 80C.