Hi there,
I hope I am doing this right. Never really been in a Forum and signed up to the second one now in one Month :-). I am a German fellow who chased his wife to DownUnder and now bought a German car and as of last week own's VCDS (quiet impressive tool). So much about me in a nutshell ;-).
I have done a scan on my Audi and expected no fault codes as it was recently in for a service and Audi said that there are no faults. Well seems like they've not seen these ones or it's of no significance, either way I was hoping to get a little insight from all the knowledgable highly respected heads here :-).
Now, here are my issues ;-).
Labels: Redir Fail!: Should I be worried or is this ok or something that can be fixed easy? It's on the engine unit so I am a bit worried...
-------------------------------------------------------------------------------
Address 01: Engine (CDY) Labels: Redir Fail!
Part No SW: 4F9 910 402 A HW: 4F0 907 401 E
Component: 3.0TDI EDC17G000AG 0080
Revision: 16H03--- Serial number:
Coding: 0125002C190F0128
Shop #: WSC 02145 785 00200
VCID: 2411113B82D90F17360-8070
No fault code found.
Readiness: 0 0 0 0 0
-------------------------------------------------------------------------------
Again a Redir Fail! ... but also a fault. If I understand VCDS right, this has occurred only one time back in 2016 and as priority is 5 its not too bad. Is this correct or should I be worried?
-------------------------------------------------------------------------------
Address 56: Radio (R) Labels: Redir Fail!
Part No SW: 4F0 035 056 B HW: 4F0 035 056
Component: Radio U STD H45 0020
Revision: AB001007 Serial number: 342B.0A7762577
Coding: 040003020100000000
Shop #: WSC 02391 823 56573
VCID: 1F1B1ED7A7BF2CCF6B2-804A
1 Fault Found:
00003 - Control Module
014 - Defective - Intermittent
Freeze Frame:
Fault Status: 00101110
Fault Priority: 5
Fault Frequency: 1
Reset counter: 255
Mileage: 107370 km
Time Indication: 0
Date: 2016.03.21
Time: 11:47:11
Freeze Frame:
Bin. Bits: 00000000 00000001
-------------------------------------------------------------------------------
And to finish off with a bang, an actual Fault, I think. I haven't done any software updates (apparently this is connected to updating the MMI or similar) and have tried this resolution which doesn't work: http://www.audienthusiasts.com/Application_SVMError.html
My MMI is on P0022
-------------------------------------------------------------------------------
Address 5F: Information Electr. (J794) Labels:. 4E0-035-6xx-5F.clb
Part No SW: 4E0 035 754 B HW: 4E0 035 754 B
Component: H-BN-RW H47 0047
Revision: -------- Serial number: 486BS0A7512530
Coding: 010A0105000293EF01000305EF6300030000
Shop #: WSC 02391 823 56573
VCID: 231312278BD7082F4FA-8076
Subsystem 1 - Part No: 8R0 060 884 DJ
Component: ROW 2016 0806
Subsystem 2 - Part No SW: 4F0 919 604 HW: 4F0 919 604
Component: DU7 High H43 0306
Serial number: 9356BS0A1192446
Subsystem 3 - Part No SW: 4F0 910 609 E HW: 4F2 919 611 M
Component: Bedienteil MM H01 0060
Serial number: 00000001499682
Subsystem 4 - Part No: 8R0 906 961 A
Component: CD-Database 1293
1 Fault Found:
03276 - Please Check Software Version Management
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 6
Fault Frequency: 1
Reset counter: 154
Mileage: 131003 km
Time Indication: 0
Date: 2018.02.05
Time: 10:58:06
Freeze Frame:
Voltage: 11.80 V
-------------------------------------------------------------------------------
Now, once again, I hope I did everything right opening this one etc. Please don't "hit" me if not but just constructive criticism ;-).
Cheers
I hope I am doing this right. Never really been in a Forum and signed up to the second one now in one Month :-). I am a German fellow who chased his wife to DownUnder and now bought a German car and as of last week own's VCDS (quiet impressive tool). So much about me in a nutshell ;-).
I have done a scan on my Audi and expected no fault codes as it was recently in for a service and Audi said that there are no faults. Well seems like they've not seen these ones or it's of no significance, either way I was hoping to get a little insight from all the knowledgable highly respected heads here :-).
Now, here are my issues ;-).
Labels: Redir Fail!: Should I be worried or is this ok or something that can be fixed easy? It's on the engine unit so I am a bit worried...
-------------------------------------------------------------------------------
Address 01: Engine (CDY) Labels: Redir Fail!
Part No SW: 4F9 910 402 A HW: 4F0 907 401 E
Component: 3.0TDI EDC17G000AG 0080
Revision: 16H03--- Serial number:
Coding: 0125002C190F0128
Shop #: WSC 02145 785 00200
VCID: 2411113B82D90F17360-8070
No fault code found.
Readiness: 0 0 0 0 0
-------------------------------------------------------------------------------
Again a Redir Fail! ... but also a fault. If I understand VCDS right, this has occurred only one time back in 2016 and as priority is 5 its not too bad. Is this correct or should I be worried?
-------------------------------------------------------------------------------
Address 56: Radio (R) Labels: Redir Fail!
Part No SW: 4F0 035 056 B HW: 4F0 035 056
Component: Radio U STD H45 0020
Revision: AB001007 Serial number: 342B.0A7762577
Coding: 040003020100000000
Shop #: WSC 02391 823 56573
VCID: 1F1B1ED7A7BF2CCF6B2-804A
1 Fault Found:
00003 - Control Module
014 - Defective - Intermittent
Freeze Frame:
Fault Status: 00101110
Fault Priority: 5
Fault Frequency: 1
Reset counter: 255
Mileage: 107370 km
Time Indication: 0
Date: 2016.03.21
Time: 11:47:11
Freeze Frame:
Bin. Bits: 00000000 00000001
-------------------------------------------------------------------------------
And to finish off with a bang, an actual Fault, I think. I haven't done any software updates (apparently this is connected to updating the MMI or similar) and have tried this resolution which doesn't work: http://www.audienthusiasts.com/Application_SVMError.html
My MMI is on P0022
-------------------------------------------------------------------------------
Address 5F: Information Electr. (J794) Labels:. 4E0-035-6xx-5F.clb
Part No SW: 4E0 035 754 B HW: 4E0 035 754 B
Component: H-BN-RW H47 0047
Revision: -------- Serial number: 486BS0A7512530
Coding: 010A0105000293EF01000305EF6300030000
Shop #: WSC 02391 823 56573
VCID: 231312278BD7082F4FA-8076
Subsystem 1 - Part No: 8R0 060 884 DJ
Component: ROW 2016 0806
Subsystem 2 - Part No SW: 4F0 919 604 HW: 4F0 919 604
Component: DU7 High H43 0306
Serial number: 9356BS0A1192446
Subsystem 3 - Part No SW: 4F0 910 609 E HW: 4F2 919 611 M
Component: Bedienteil MM H01 0060
Serial number: 00000001499682
Subsystem 4 - Part No: 8R0 906 961 A
Component: CD-Database 1293
1 Fault Found:
03276 - Please Check Software Version Management
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 6
Fault Frequency: 1
Reset counter: 154
Mileage: 131003 km
Time Indication: 0
Date: 2018.02.05
Time: 10:58:06
Freeze Frame:
Voltage: 11.80 V
-------------------------------------------------------------------------------
Now, once again, I hope I did everything right opening this one etc. Please don't "hit" me if not but just constructive criticism ;-).
Cheers