Page 4 of 5 FirstFirst ... 2345 LastLast
Results 31 to 40 of 44

Thread: HEX-NET or HEX-V2 Firmware Update Failed?

  1. #31
    VCDS Distributor Mike@Gendan's Avatar
    Join Date
    Jun 2014
    Location
    Swansea, UK
    Posts
    349
    Post Thanks / Like
    It shouldn't take that long but there have been a few server problems since the release of 18.9.
    If it's stuck in a loop, abort it and try again
    Apparently I should put something witty or profound in here...

  2. Likes Boki Ar, Uwe liked this post
  3. #32
    Verified VCDS User
    Join Date
    Feb 2018
    Location
    Romania
    Posts
    10
    Post Thanks / Like
    Hello gentlemen!

    Hex-V2
    Last night, I tried to update the interface, for new C.B 0.4505!

    After the update, which failed, the interface, forgets that C.B. C.B 0.4505 when I remove it from the USB port.
    Blinking red until update, and green after update.
    But if I remove it from the USB port, it blinks red again when I insert it!

    I can not finish the test because the buttons are gray!

    again and again
    .............
    Preparing Update
    No update files received.
    Socket timed out (2)
    Transfer Complete
    Update completed successfully

    .....
    again and again
    Last edited by LostAngel; 05-27-2019 at 11:43 AM. Reason: the interface is unusable!

  4. #33
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    23,009
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by LostAngel View Post
    I can not finish the test because the buttons are gray!

    again and again
    .............
    Preparing Update
    No update files received.
    Socket timed out (2)
    Transfer Complete
    Update completed successfully

    .....
    again and again
    What version of VCIConfig are you using?

    Server status looks nominal from here. It is a major US holiday today, so nobody is in the office to check in more detail.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  5. #34
    Verified VCDS User
    Join Date
    Feb 2018
    Location
    Romania
    Posts
    10
    Post Thanks / Like
    I sent a private message!
    The problem is that every update is forgotten and CB reverts to 0,
    as soon as they insert the interface,
    and changing the Beta channel in Release or Release to Beta is error !

    V 2.244

  6. #35
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    23,009
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by LostAngel View Post
    I sent a private message!
    V 2.244
    Yes, I just saw it.

    Try 2.248 that comes with the VCDS Beta version you can download from this page.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  7. #36
    Verified VCDS User
    Join Date
    Feb 2018
    Location
    Romania
    Posts
    10
    Post Thanks / Like
    I tried everything that was human, possibly, including beta, even older versions!
    I'm basically turning into a vicious circle!


    After the update, everything looks fine, but I can not save anything. Buttons are gray. If I remove the interface from the usb, everything starts from the beginning. I tried and on the car, nothing works because I can not complete the test. The interface has not been used at least 20 times. Basically it's new!

  8. #37
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    23,009
    Post Thanks / Like
    Blog Entries
    1
    Unplug interface. Let it rest for at least one hour. Go have a beverage in the meanwhile. Then try again. Please use 2.248. If it still behaves the same, I will need the people in the office tomorrow to take a look if they can see something wrong.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  9. Likes LostAngel liked this post
  10. #38
    Verified VCDS User
    Join Date
    Feb 2018
    Location
    Romania
    Posts
    10
    Post Thanks / Like
    Preparing Update
    No update files received.
    Socket timed out (2)
    Transfer Complete
    Update completed successfully

    CB 0.4505
    FW 0.256
    CFB 0.10
    BL 0.28
    ......
    Port status OK
    Interface Not Found!

    Overview H11.........
    CB 0.4505
    fw 0.256


    .................................................. ........make sure your interface is set to use the BETA Channel
    but this function does not work - Change chanal givme message- chanal switch failed

  11. #39
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    23,009
    Post Thanks / Like
    Blog Entries
    1
    Server indicates it is already set to Beta channel, but I think right now, this doesn't matter since 0.4505 is the latest version on both channels.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  12. #40
    Verified VCDS User
    Join Date
    Feb 2018
    Location
    Romania
    Posts
    10
    Post Thanks / Like
    24h try to solve the situation! I'll try it later! If I succeed, I will let you know, but I tried everything that was humanly possible! I wish you a beautiful day!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •