Introducing and a problem on my car.

Hello ,

this i my first post here , i come from the Netherlands and i drive a 2011 seat leon cupra r.

in my spare time i fix cars and specially vag cars.

recently i did a retrofit but it does not work correctly.

i try to get the mirror down working on my leon, i fitted an new motor with memory and i have fitted the wiring from a golf 6.

i had to code module 52 and module 09. but when i shift in reverse gear the mirror goes up.

and it will not go back to its home position.

does anyone know if this can be fixed ?

Address 52: Door Elect, Pass. Labels: 3C0-959-70X-GEN4.clb
Control Module Part Number: 1T0 959 702 AC HW: 3C0 959 792 A
Component and/or Version: TUER-SG BT 002 0311
Software Coding: 0015B0
Work Shop Code: WSC 99999 123 12345
ASAM Dataset: EV_DCU52BrosePasseSide A03004 (SE35)
ROD: EV_DCU52BrosePasseSide.rod
VCID: F9F3C533780D608D72-80AC
1 Fault Found:

66821 - Position Sensor for Mirror Adjustment
B11FA 29 [008] - Signal Implausible
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 3
Reset counter: 214
Mileage: 179769 km
Date: 2082.14.03
Time: 17:24:09

this is the scan from the module 52

thanks

Roelb79 said:

this i my first post here

Click to expand...

No, it is not.

Roelb79 said:

recently i did a retrofit but it does not work correctly.

Click to expand...

Please Get Verified so we can move this to the correct (Retrofits) section of the forum.

-Uwe-

Uwe said:

No, it is not.


Please Get Verified so we can move this to the correct (Retrofits) section of the forum.

-Uwe-

Click to expand...

You are correct i did post something here , i have send a reply to a member.
About get verified , i have bought my vcds cable from the original buyer. That is the reason that i am not verified.

Thanks

Roel