Results 1 to 5 of 5

Thread: Set xenon on vw golf 2009

  1. #1
    Pirate
    Join Date
    Feb 2018
    Location
    Netherlands
    Posts
    3
    Post Thanks / Like

    Set xenon on vw golf 2009

    Hello forum members.

    i have build xenon on my vw golf 2009 and installed it witch afs system.

    For this i have to set my xenon as shown below:

    Basic Setting

    Software Part Numbers 5M0-907-357 through 5M0-907-357-D ONLY
    Headlight Adjustment

    [Select]
    [55 - Xenon Range]
    [Basic Settings - 04]
    Group 001
    [Go!]
    Activate the Basic Setting.
    [ON/OFF/Next]

    The meas. block field now shows "Wait" and should switch to "Adjust Headlights" then (this may take up to 10 seconds).
    Adjust the headlights using their manual adjusting screws as referenced against a suitable aiming target.

    [ON/OFF/Next]
    The adjustment should now be learned.
    [Done, Go Back]
    Don't forget to check/clear fault codes afterwards.
    [Close Controller, Go Back - 06]

    the meas block field does not show in vagcom.

    i down know what i am doeing wrong.

    everything is ok and there are no error messages comming up.


    who can help me?

  2. #2
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    19,917
    Post Thanks / Like
    Blog Entries
    1
    Please post an Auto-Scan for context.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  3. #3
    Pirate
    Join Date
    Feb 2018
    Location
    Netherlands
    Posts
    3
    Post Thanks / Like
    i did the scan, and this are the results.

    Code:
    Removed.   Data from a clone/pirate copy of VCDS is not welcome here

    i hope you can find a sollution?
    Last edited by Uwe; 02-08-2018 at 12:06 PM.

  4. #4
    Pirate
    Join Date
    Feb 2018
    Location
    Netherlands
    Posts
    3
    Post Thanks / Like
    i have also got these two errors

    but i down have a alarm in my car and is still gives a alarm horn error.
    And also gives a error for my rear spoiler with does not move so it moesnt give a error


    Code:
    Removed.   Data from a clone/pirate copy of VCDS is not welcome here
    Last edited by Uwe; 02-08-2018 at 12:06 PM.

  5. #5
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    19,917
    Post Thanks / Like
    Blog Entries
    1
    Legitimate VCDS systems are available directly from us:
    https://store.ross-tech.com/shop/cat/VCDS

    ... Or from any of our authorized resellers:
    http://www.ross-tech.com/distributors.php#nl

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •