Results 1 to 3 of 3

Thread: Hex net wifi

  1. #1
    Verified VCDS User
    Join Date
    Nov 2014
    Location
    Cornish (USA)
    Posts
    96
    Post Thanks / Like

    Hex net wifi

    When I plug my Hex Net wifi interface into the port in my car I can't find it with my IPhone. When I look at the interface while it is plugged into my car the middle light is flashing red. I haven't used the mobile part recently but did I use the interface 4 days ago with it hooked to my computer and it worked fine. I have down loaded the most recent up grade 18.1.0 and the interface is up to date. What am I doing wrong any help would be greatly appreciated.

  2. #2
    Ross-Tech Employee
    Join Date
    Jan 2014
    Location
    USA
    Posts
    859
    Post Thanks / Like
    It sounds like you have it in infrastructure mode where it is searching for an access point (router). Push the red button to flip it into AP mode so it broadcasts it's own network.

  3. Likes Uwe liked this post
  4. #3
    Verified VCDS User
    Join Date
    Nov 2014
    Location
    Cornish (USA)
    Posts
    96
    Post Thanks / Like
    Thank you its 5 below 0 outside I think I will wait until tomorrow to try that.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •