Page 1 of 3 123 LastLast
Results 1 to 10 of 29

Thread: New to me 2006 Jetta Non working wipers

  1. #1
    Verified VCDS User
    Join Date
    Dec 2017
    Location
    USA
    Posts
    13
    Post Thanks / Like

    New to me 2006 Jetta Non working wipers

    Hello all, this is my first post to this forum as I just received my Vag-com last night! Thank for having me!

    In the last month I acquired my 2006 Jetta 1.9 tdi with 204k miles (now with 207,8xx). I bought it knowing the wipers didn't work thinking big deal, fuse right?! Well wrong. I've checked all fuses, hood switch works, washer fluid sprays work. I got a used motor/transmission assembly from local salvage yard, same status. I drove the car to a dealer 2 hours away for them to tell me they couldn't figure out the problem and I needed to schedule another appointment. They did tell me 3 modules were not communicating... no other details although they didn't charge me either so not much to complain about there.. I have also verified battery power to wiper motor plug, have continuity thorough ground wire and signal wire was showing 10.X volts. I have pulled my dash apart and checked pins and plugs at j519 module and j527 module in steering wheel and continuity to as many wires as I can trace. It was apparent some one else has been in there before as the J527 module had a sticker on the case that was peeled back. I have invested about 16 hours into figuring out this issue and has become apparent that I needed the Vag-com. I will post my auto scan below, I see there are a couple things in the scan I didn't know was an issue as well like the heater element and radio issue. I wonder if someone has changed the original radio to a lower option stock radio because XM radio sent me a 2 month trial radio offer but this one does not have satellite option. As far as I can tell the car is completely stock. I also had and airbag light come on after I had taken the dash and steering column apart (did all this with battery disconnected) which I was able to clear. Bulb out indicator was on until I discovered city light bulbs were missing, appears as someone replaced headlights and failed to install bulbs.

    If I've missed any info please ask, I am trying my best for this 1st time around. Never used vag-com before and I do not have a service manual although this will be my next investment so suggestions are greatly appreciated of which one to get.

    Thank you in advance for any help offered, I am very handy and competent just needing input where to go from here.

    Best Regards

    Code:
    Friday,01,December,2017,11:37:35:59552
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
    VCDS Version: 17.8.1.0 (x64)  HEX-V2 CB: 0.4407.4
    Data version: 20171130 DS276.6
    www.Ross-Tech.com
    
    
    VIN: 3VWST71K66M773440   License Plate: 
    Mileage: 334470km-207830mi   Repair Order: 001
    
    
    Chassis Type: 1K (1K0)
    Scan: 01 03 08 09 0F 15 16 17 19 25 42 44 46 52 56 62 72 7D
    
    VIN: 3VWST71K66M773440   Mileage: 334470km-207830miles
    
    00-Steering Angle Sensor -- Status: OK 0000
    01-Engine -- Status: OK 0000
    03-ABS Brakes -- Status: OK 0000
    08-Auto HVAC -- Status: OK 0000
    09-Cent. Elect. -- Status: Malfunction 0010
    0F-Digital Radio -- Status: Malfunction 0010
    15-Airbags -- Status: OK 0000
    16-Steering wheel -- Status: OK 0000
    17-Instruments -- Status: OK 0000
    19-CAN Gateway -- Status: OK 0000
    25-Immobilizer -- Status: OK 0000
    42-Door Elect, Driver -- Status: OK 0000
    44-Steering Assist -- Status: OK 0000
    46-Central Conv. -- Status: OK 0000
    52-Door Elect, Pass. -- Status: OK 0000
    56-Radio -- Status: OK 0000
    62-Door, Rear Left -- Status: OK 0000
    72-Door, Rear Right -- Status: OK 0000
    7D-Aux. Heat -- Status: Malfunction 0010
    -------------------------------------------------------------------------------
    Address 01: Engine        Labels: 038-906-016-BEW.lbl
       Part No SW: 03G 906 016 AB    HW: 028 101 223 8
       Component: R4 1,9L EDC G000SG  7550  
       Revision: --H01---    Serial number: VWZ7Z0F3301138
       Coding: 0050071
       Shop #: WSC 00066 000 00000
       VCID: 6393528E275B321F273-8036
    
    No fault code found.
    Readiness: 0 0 0 0 1 
    
    -------------------------------------------------------------------------------
    Address 03: ABS Brakes        Labels: 1K0-907-379-MK60-F.lbl
       Part No SW: 1K0 907 379 AA    HW: 1K0 907 379 AA
       Component: ESP FRONT MK60      0102  
       Revision: 00H13001    
       Coding: 0021122
       Shop #: WSC 00066 000 00000
       VCID: 71BF28C6EDA7908FA5F-8024
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 08: Auto HVAC        Labels: 1K0-820-047.lbl
       Part No: 1K0 820 047 EC
       Component: Climatic PQ35   090 0505  
       Shop #: WSC 00000 000 00000
       VCID: 698F40A6C577684FEDF-803C
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 09: Cent. Elect.        Labels:. 3C0-937-049-23-M.lbl
       Part No SW: 3C0 937 049 D    HW: 3C0 937 049 D
       Component: Bordnetz-SG     H37 1002  
       Revision: 00H37000    Serial number: 00000000253641
       Coding: 14018E234004180000140000001400000008730B5C
       Shop #: WSC 23301 444 00792
       VCID: 2A0DFFAA00F1A357245-807E
    
       Subsystem 1 - Component: Fehler Lin-Slave 01 
    
    2 Faults Found:
    02071 - Local Databus 
                004 - No Signal/Communication
                 Freeze Frame:
                        Fault Status: 01100100
                        Fault Priority: 2
                        Fault Frequency: 1
                        Reset counter: 32
                        Mileage: 334470 km
                        Time Indication: 0
    
                 Freeze Frame:
                            ON
                        Voltage: 13.00 V
                            ON
                            ON
                            OFF
                            OFF
                            OFF
    
    00153 - Windshield Wiper Motor;  Driver Side (V216) 
                004 - No Signal/Communication
                 Freeze Frame:
                        Fault Status: 01100100
                        Fault Priority: 2
                        Fault Frequency: 1
                        Reset counter: 32
                        Mileage: 334470 km
                        Time Indication: 0
    
                 Freeze Frame:
                            ON
                        Voltage: 13.00 V
                            ON
                            ON
                            OFF
                            OFF
                            OFF
    
    
    -------------------------------------------------------------------------------
    Address 0F: Digital Radio        Labels: 8E0-035-593-XM.lbl
       Part No SW: 8E0 035 593 E    HW: 8E0 035 593 E
       Component: SDAR XM         H03 0080  
       Revision: 00000000    Serial number: AUZ4Z7F5044210
       Shop #: WSC 00000 000 00000
       VCID: 2B03FAAE0F0BBA5FDF3-807E
    
    1 Fault Found:
    02635 - Tuner Not Enabled/Activated 
                000 -  - 
                 Freeze Frame:
                        Fault Status: 01100000
                        Fault Priority: 7
                        Fault Frequency: 1
                        Reset counter: 32
                        Mileage: 334470 km
                        Time Indication: 0
                        Date: 2000.00.00
                        Time: 22:33:01
    
    
    -------------------------------------------------------------------------------
    Address 15: Airbags        Labels: 1K0-909-605.lbl
       Part No SW: 1K0 909 605 P    HW: 1K0 909 605 P
       Component: 39 AIRBAG VW8R  032 7900  
       Revision: 03032000    Serial number: 0038FD042AJV  
       Coding: 0013113
       Shop #: WSC 00066 000 00000
       VCID: 392FD0E6F55718CF5DF-806C
    
       Subsystem 1 - Part No: 1K0 959 339 E
       Component: BF-Gewichtsens. 006 0005
    
       Subsystem 2 - Serial number: 6332MSME0D35450EF
    
       Subsystem 3 - Serial number: 6342MSME0D351D60D
    
       Subsystem 4 - Serial number: 6351HSME091C174AB
    
       Subsystem 5 - Serial number: 6361HSME091D1C49H
    
       Subsystem 6 - Serial number: 63727SME08254B4C6
    
       Subsystem 7 - Serial number: 63827SME086C4B5DK
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 16: Steering wheel        Labels: 1K0-953-549-MY8.lbl
       Part No SW: 1K0 953 549 AH    HW: 1K0 953 549 AH
       Component: J0527           034 0070  
       Coding: 0000021
       Shop #: WSC 00066 000 00000
       VCID: 78A915E28EDDC1C7621-802C
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 17: Instruments        Labels: 1K0-920-xxx-17.lbl
       Part No: 1K0 920 952 L
       Component: KOMBIINSTRUMENT 3HL 4312  
       Coding: 0023203
       Shop #: WSC 23317 444 85571
       VCID: 3333E2CED73BE29F973-8066
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 19: CAN Gateway        Labels:. 1K0-907-530-V1.clb
       Part No SW: 1K0 907 530 F    HW: 1K0 907 951 
       Component: Gateway         H10 0120  
       Revision:   H10       Serial number: 2800105C1284CC
       Coding: 3D3F0B60071002
       Shop #: WSC 00066 000 00000
       VCID: 2A0DFFAA00F1A357245-807E
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 25: Immobilizer        Labels: 1K0-920-xxx-25.clb
       Part No: 1K0 920 952 L
       Component: IMMO            3HL 4312  
       Shop #: WSC 00000 000 00000
       VCID: 3333E2CED73BE29F973-8066
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 42: Door Elect, Driver        Labels: 1K0-959-701-MIN2.lbl
       Part No: 1K0 959 701 K
       Component: Tuer-SG         024 2377  
       Coding: 0001269
       Shop #: WSC 00066 000 00000
       VCID: 3635DBDAC449F7B7B0D-8062
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 44: Steering Assist        Labels: 1Kx-909-144-G2V2.clb
       Part No: 1K1 909 144 K
       Component: EPS_ZFLS Kl.5   D06 1701  
       Shop #: WSC 00000 000 00000
       VCID: 3333E2CED73BE29F973-8066
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 46: Central Conv.        Labels:. 1K0-959-433-MIN.clb
       Part No: 1K0 959 433 AF
       Component:    KSG              0401  
       Coding: 137803281B09058F880F048051A0
       Shop #: WSC 00066 000 00000
       VCID: 74B121D292B5A5A74E9-8020
    
       Subsystem 1 - Component:   Sounder n.mounted     
    
       Subsystem 2 - Component:       NGS n.mounted     
    
       Subsystem 3 - Component:      IRUE n.mounted     
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 52: Door Elect, Pass.        Labels: 1K0-959-702-MIN2.lbl
       Part No: 1K0 959 702 K
       Component: Tuer-SG         024 2377  
       Coding: 0001269
       Shop #: WSC 00066 000 00000
       VCID: 372BD6DEC3430EBFABB-8062
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 56: Radio        Labels: 1K0-035-1xx-56.lbl
       Part No SW: 1K0 035 180 A    HW: 1K0 035 180 A
       Component: Radio DE2       008 0011  
       Revision: 00008000    Serial number: VWZ4Z7E2009284
       Coding: 0040400
       Shop #: WSC 00066 000 00000
       VCID: 1E65237A4CB95FF748D-804A
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 62: Door, Rear Left        Labels: 1K0-959-703-GEN2.lbl
       Part No: 1K0 959 703 D
       Component: Tuer-SG         021 2434  
       Coding: 0000144
       Shop #: WSC 00066 000 00000
       VCID: 313FE8C62D27D08FE5F-8064
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 72: Door, Rear Right        Labels: 1K0-959-704-GEN2.lbl
       Part No: 1K0 959 704 D
       Component: Tuer-SG         021 2434  
       Coding: 0000144
       Shop #: WSC 00066 000 00000
       VCID: 323DE7CA2821EB979C5-8066
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 7D: Aux. Heat        Labels: 1K0-963-235.lbl
       Part No SW: 1K0 963 235 E    HW: 1K0 963 235 E
       Component: PTC-Element         0404  
       Revision: 00800000    Serial number:               
       Shop #: WSC 00000 000 00000
       VCID: 2D07F4B6311FB46FC17-8078
    
    1 Fault Found:
    00361 - Heater Element for Auxiliary Heater (Z35) 
                014 - Defective
    
    End----------(Elapsed Time: 01:08, VBatt start/end: 13.0V/13.0V)-----------
    Last edited by Uwe; 12-01-2017 at 12:46 PM. Reason: CODE tags

  2. #2
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    13,046
    Post Thanks / Like
    Welcome to the VCDS forums OP and thank you for posting an auto-scan........

    What is the status of stalk switches in VCDS blocks....?

    Take a power probe or led test light and connect it to the can wires without applying power with the probe then pull the stalk or change position of speeds and see if any COM flash changes on blink of LED.

    Is power and ground at motor sufficient?
    Have you coded or adapted the wiper motor as per the RTFB?

    Faults are pretty clear on local DB.......see WD and verify the twisted pair for CAN.

    http://forums.ross-tech.com/showthre...derstanding-of-!


    JPPSG

    http://forums.ross-tech.com/showthre...uot-JPPSG-quot
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  3. Likes MTShaun liked this post
  4. #3
    Verified VCDS User
    Join Date
    May 2017
    Location
    Finland
    Posts
    643
    Post Thanks / Like
    Are you sure the motor assembly you got as replacement is ok? There's no CAN connection to wiper motor as it's on LIN bus. So there shouldn't be any CAN wires going to it. As far as I remember the LIN bus works on single wire.

    The error you see is usually indicator that the wiper motor assembly is dead. You might get signal to the plug but the problem is inside the assembly, there's a controller chip that fries and it does not communicate with the BCM anymore. Same effect happens if you install bad quality aftermarket xenon set.

    I would return the salvaged the part you got and get another one just to make sure.

    I presume Jetta has only one motor for the wipers?

  5. Likes Jack@European_Parts, MTShaun liked this post
  6. #4
    Verified VCDS User Keithuk's Avatar
    Join Date
    Apr 2014
    Location
    Stoke on Trent, England
    Posts
    669
    Post Thanks / Like
    http://wiki.ross-tech.com/wiki/index.php/00153

    Example: http://autos.groups.yahoo.com/group/.../message/25048 doesn't show for me even if you show it in a new tab This page can’t be displayed

    Make sure the web address http://autos.groups.yahoo.com is correct.
    New User Keith

    2010 Golf GTD (170) CBBB, 5 Door, Shadow Blue (P6/D5Q), Flat Tyre Indicator, Basic Protection Pack + VCDS.

  7. Likes Jack@European_Parts, MTShaun liked this post
  8. #5
    Verified VCDS User
    Join Date
    Dec 2017
    Location
    USA
    Posts
    13
    Post Thanks / Like
    Thank you both for your quick replies.

    I am playing with VCDS and figuring out some cool stuff! The wiper switch in the vcds blocks appears to be working because the status changes with each adjustment. I am not sure the motor assembly I got from the salvage yard is good or not, how can I test it? Also as I wrote in my initial post, I checked continuity to ground, it appears sufficient. The main power wire is same as battery voltage and the signal wire is 10+/- volts depending on selector stock. I don't know what is sufficient here...

    The Jetta does only have one motor for the wipers in which I have become an expert in removing and installing during all my troubleshooting

    If I get a good motor assembly would the car recognize it right away or would programming through vcds be in order?

  9. #6
    Ross-Tech Employee Jef's Avatar
    Join Date
    Jan 2014
    Posts
    1,550
    Post Thanks / Like
    2 Faults Found:
    02071 - Local Databus
    004 - No Signal/Communication

    00153 - Windshield Wiper Motor; Driver Side (V216)
    004 - No Signal/Communication


    You need to verify you have good power, ground and data at the wiper motor. If any of those is not to factory design, those fault codes will get flagged. If all 3 are to factory design, then bad wiper motor, or in some rare cases... bad J519. So tell me about your headlights....
    Jef
    Ross Tech Support Team, Alpha Squad
    Auto-Scan, learn it, love it, live it... then check the fuses.

  10. Likes MTShaun, Jack@European_Parts liked this post
  11. #7
    Verified VCDS User
    Join Date
    Dec 2017
    Location
    USA
    Posts
    13
    Post Thanks / Like
    I removed my wiper motor, salvage yard will refund me but they don't have another one. I did find one at another yard so I will pick this one up and give it a try. I will keep all of you posted on the results of this next replacement!

  12. #8
    Verified VCDS User
    Join Date
    Dec 2017
    Location
    USA
    Posts
    13
    Post Thanks / Like
    My headlights are factory replacements it looks like. They use the same wiring with h7 halogen bulbs.

  13. #9
    Ross-Tech Employee Jef's Avatar
    Join Date
    Jan 2014
    Posts
    1,550
    Post Thanks / Like
    OK, only reason I ask it this:

    Wiper Motor Control Module (J400 / Slave of Address 09) failure is common due to Voltage Spikes in the HID Conversion Kit Electronics. This is mostly caused by low Quality Components being used by the Vendors.
    http://wiki.ross-tech.com/wiki/index...t_Retrofitting

    We use to get a lot of calls on that... and Kuuufuuutick... Dana and I were so close to a killing spree.
    Jef
    Ross Tech Support Team, Alpha Squad
    Auto-Scan, learn it, love it, live it... then check the fuses.

  14. #10
    Verified VCDS User
    Join Date
    Dec 2017
    Location
    USA
    Posts
    13
    Post Thanks / Like
    Ok, so I put in another wiper motor. Same status no luck, I'm thinking it must the J519 Jef? On your chart I have power and ground at the motor, how do I check Data?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •