MK6 Golf GTI - Auto Folding Mirrors?

Hi, long time user of VCDS but new to the Forum.

I've just purchased a 2012 Mk6 Golf GTI Edition 35 and have enabled a number of tweaks, Staging, Auto Home etc, but I can't seem to get the mirrors to auto fold when locking and unlocking the car. I've tried following this process (http://forums.vwvortex.com/showthre...de-mirrors-DIY-tutorial-(nice-coding-feature) but when I try and enable Adaption by entering the security code 04354 I receive an error incorrect code. Can anyone help with the correct code please so I can access the Adaption Menu on the door controller.

Just to confirm, I have folding mirrors, which fold on the switch.

Address 42: Door Elect, Driver Labels:. 1K0-959-701-MAX3.clb
Part No SW: 5K0 959 701 C HW: 5K0 959 701 C
Component: Tuer-SG 009 2120
Coding: 0004862
Shop #: WSC 01357 011 00200
VCID: 326BDD94ADA6B0D64C-8066

1 Fault Found:
00120 - Outside Warning Light/Door exit Light Driver Side
012 - Electrical Fault in Circuit

Many thanks in advance

Nick

Not possible to make mirrors fold with remote with VCDS on MK6. Some have managed to do it by tampering the door control module eeprom directly.

One option is to buy new door control modules that support folding by key fob. Seat Leon and VW Tiguan modules at least should support remote folding.

Note though. The mirrors won't fold even with those when locking the door, you need to keep the lock button pressed for 2 -3 seconds for mirrors to fold.

You can try that already now if the comfort mirror folding is supported. Lock the car but keep the remote lock button presssed for a few seconds. The mirrors should fold.

Apparently this is possible with UK cars, plenty of youtube videos all referencing the same "how to" but I can't try this as I need the security access. Does anyone know the correct code?

The code is correct, but as mentioned by downtime this requires EEPROM access, since you have GEN3 door modules. VCDS only can change GEN4 modules trough adaption.

I‘ve written a guide for both, so that‘s pretty much it.

OK, so I need to check if the comfort mirror folding is available? Can you let me know where I would find that option? If it's not available, I'll have to swap out the door controllers. Can you advise which part numbers? I would need? right hand drive UK spec.

Many thanks in advance

and can you post a link to the guides please?

Nick, where in the UK are you? I might be able to help with the EEPROM access to get this working

Hi, I’m in Ipswich! Whereabouts are you?

Its possible on stock MK6 controllers but not with VCDS.

Thanks, I’m happy using VCDS for mainly diagnostics etc. and enabling extras such as staging, windows up on lock, etc, but when it comes to EEPROM I’m lost!

Any tutorials, how to’s, product needed etc? Any info gratefully received

I'm up in Norfolk so not massively far away, I'll drop you a PM

Many thanks to langers2k EEPROM tweaked and now mirrors fold on 2 second key press and unfold when ignition turned on. Puddle lights working with mirrors folded and unfolded. Many thanks for sorting this, big smile when I returned home and locked the car

No worries, happy to help

TBAx said:

The code is correct, but as mentioned by downtime this requires EEPROM access, since you have GEN3 door modules. VCDS only can change GEN4 modules trough adaption.

I‘ve written a guide for both, so that‘s pretty much it.

Click to expand...

So what do you use for EEPROM access? I have a 2012 EOS and would like that feature...

Thank you.

Frank in Michigan

I'm personally using VCP (VAG Can Pro), but other tools might work as well. Also, EEPROM Programmers should work, if you are willing to disassemble your door module.

TBAx said:

I'm personally using VCP (VAG Can Pro), but other tools might work as well. Also, EEPROM Programmers should work, if you are willing to disassemble your door module.

Click to expand...

So does the the Vag Can Pro do all the things my MICRO-Can does plus more?

Thanks

Frank in Michigan

This is the wrong place for discussing that.