Results 1 to 6 of 6

Thread: B5 Passat ABS Issue, Input Appreciated

  1. #1
    Verified VCDS User
    Join Date
    Oct 2017
    Location
    South Florida
    Posts
    5
    Post Thanks / Like

    Question B5 Passat ABS Issue, Input Appreciated

    Question...if I'm getting intermittent ABS/Brake/TC all lit (plus three beep chime), increasing in frequency over a couple months, would the ABS module be first area of focus, after physical connections? See below

    18057 - Powertrain Data Bus
    P1649 - 008 - Missing Message from ABS Controller - Intermittent

    Address 03: ABS Brakes Labels: 8E0-614-111-ASR.lbl
    Part No: 3B0 614 111
    Component: ABS/ASR 5.3 FRONT D00
    Coding: 00021
    Shop #: WSC 05314
    VCID: 53F381DCC2E5E2DFB68-51CE
    2 Faults Found:
    01203 - Electrical Connection between ABS and Instrument Cluster
    03-10 - No Signal - Intermittent
    18256 - Please check DTC Memory of Engine Controller
    P1848 - 35-10 - - Intermittent
    -------------------------------------------------------------------------------

    Address 19: CAN Gateway Labels: 6N0-909-901-19.lbl
    Part No: 6N0 909 901
    Component: Gateway K<->CAN 0001
    Coding: 00006
    Shop #: WSC 05314
    VCID: 70B92E5053B3B9C7ABA-513C
    1 Fault Found:
    01316 - ABS Control Module
    49-10 - No Communications - Intermittent
    -------------------------------------------------------------------------------

  2. #2
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    27,852
    Post Thanks / Like
    Blog Entries
    1
    I think so. Those Bosch 5.3 ABS modules are rather notorious...

    -Uwe-
    Lock-down of sick people: Quarantine
    Lock-down of healthy people: Tyranny

  3. Likes Jack@European_Parts liked this post
  4. #3
    Verified VCDS User
    Join Date
    Oct 2017
    Location
    South Florida
    Posts
    5
    Post Thanks / Like
    Quote Originally Posted by Uwe View Post
    I think so. Those Bosch 5.3 ABS modules are rather notorious...

    -Uwe-
    I think I'll track one down soon to install and code as needed.

  5. #4
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    19,278
    Post Thanks / Like
    Take apart and re-solder the legs on the crummy solder joints.


    At home




    The Pros

    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  6. Likes Uwe liked this post
  7. #5
    Verified VCDS User
    Join Date
    Oct 2017
    Location
    South Florida
    Posts
    5
    Post Thanks / Like
    Quote Originally Posted by Jack@European_Parts View Post
    Take apart and re-solder the legs on the crummy solder joints.

    ...a good idea... Most likely, I'll get a warranted refurb...and core the old one, unless I get the time to bench repair it at work.

  8. #6
    Verified VCDS User
    Join Date
    Oct 2017
    Location
    South Florida
    Posts
    5
    Post Thanks / Like
    Guys, I opted to core-exchange through Cheap ABS. The major faults went away after replacement, but I did register a wheel sensor fault. The sensor was pretty oxidized and cruddy, so I cleaned it and have no brake faults, at this point I'll update as I put on a few miles.

  9. Likes Uwe, Jack@European_Parts liked this post

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •