Page 1 of 3 123 LastLast
Results 1 to 10 of 24

Thread: Coding ABS module (Bosch 5.7)

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Verified VCDS User
    Join Date
    Sep 2017
    Location
    USA
    Posts
    97
    Post Thanks / Like

    Coding ABS module (Bosch 5.7)

    Hello.
    I just ordered the Ross tech cable. I need some help or how to code the ABS module on my 04 A4 Quattro.
    Also with the cable is it possible to turn off the alarm or the beeping when locking/unlocking car?
    Thank you

  2. #2
    Verified VCDS User PetrolDave's Avatar
    Join Date
    Dec 2014
    Location
    South Molton, UK
    Posts
    2,986
    Post Thanks / Like
    The first step to getting help is to post a full Auto-Scan once you get your cable. That gives important information on what module hardware & firmware is fitted to your car.
    Last edited by Uwe; 10-01-2017 at 01:20 PM. Reason: Added link

  3. Likes Uwe, Boki Ar liked this post
  4. #3
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    27,051
    Post Thanks / Like
    Blog Entries
    1
    Yes, both of those things should be doable on a B6 A4. I would expect it to have a Bosch 5.7 ABS, so have a look at this page and watch the video linked at the bottom.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  5. Likes Boki Ar, Ashraf6119 liked this post
  6. #4
    Verified VCDS User
    Join Date
    Sep 2017
    Location
    USA
    Posts
    97
    Post Thanks / Like
    i read that I can do auto scan and copy the abs module, then paste it on the new one? but i already have the new module installed. I guess i can unplug the new one, and plug it on the old then do auto scan and copy.

  7. #5
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    27,051
    Post Thanks / Like
    Blog Entries
    1
    Codings on those Bosch 5.7 modules are short enough that Copy & Paste isn't really necessary. However, it would not be a bad idea to see what the old module's coding was. You don't need to do a full Auto-Scan for that; just [Select] -> [03-ABS] and you'll see the coding. If you'd like to save it, go to [Fault Codes] and [Save Codes] even if there aren't any. That will record all of that control module's ID data (including coding).

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  8. #6
    Verified VCDS User
    Join Date
    Sep 2017
    Location
    USA
    Posts
    97
    Post Thanks / Like
    Great thank you for fast reply and help.

  9. #7
    Verified VCDS User
    Join Date
    Sep 2017
    Location
    USA
    Posts
    97
    Post Thanks / Like
    hi guys, I received my Cable last night. im going to try to connect today . so Do I need to connect my old ABS module and do a autoscan 1st, or can I leave my new one in the car and fallow the procedure

  10. #8
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    27,051
    Post Thanks / Like
    Blog Entries
    1
    Let's start with a scan from the car in its current condition.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  11. #9
    Verified VCDS User
    Join Date
    Sep 2017
    Location
    USA
    Posts
    97
    Post Thanks / Like
    Code:
    Thursday,05,October,2017,17:48:59:43295
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
    VCDS Version: 17.8.0.1 (x64)  HEX-V2 CB: 0.4401.4
    Data version: 20170721 DS276.2
    www.Ross-Tech.com
    
    Dealer/Shop Name: Atanas D
    
    VIN: WAULT68E14A008323   License Plate: BFR6126
    Mileage: 278430km-173008mi   Repair Order: RO#1
    
    
    Chassis Type: 8E (8E - Audi A4/S4/RS4 B6/B7 (2001 > 2008))
    Scan: 01 02 03 08 09 0F 11 15 16 17 18 25 36 37 45 46 55 56 57 65
              67 69 75 76 77
     
    VIN: WAULT68E14A008323   Mileage: 278430km-173008miles
    -------------------------------------------------------------------------------
    Address 01: Engine        Labels: 06C-909-559-ASN.lbl
       Part No SW: 8E0 909 559 L    HW: 8E0 909 059 
       Component: 3.0L V6/5V      G   0010  
       Coding: 0016711
       Shop #: WSC 63351 000 00000
       VCID: 3E25C0691C6D2407696-5160
    
    8 Faults Found:
    17524 - Oxygen (Lambda) Sensor Heating; B1 S1 
                P1116 - 004 - Open Circuit - MIL ON
    16684 - Random/Multiple Cylinder Misfire Detected 
                P0300 - 002 -  - Intermittent
    16687 - Cylinder 3 
                P0303 - 002 - Misfire Detected - Intermittent
    16690 - Cylinder 6 
                P0306 - 008 - Misfire Detected - Intermittent
    16686 - Cylinder 2 
                P0302 - 002 - Misfire Detected - Intermittent
    16688 - Cylinder 4 
                P0304 - 008 - Misfire Detected - Intermittent
    16689 - Cylinder 5 
                P0305 - 008 - Misfire Detected - Intermittent
    16685 - Cylinder 1 
                P0301 - 002 - Misfire Detected - Intermittent
    Readiness: 0110 1001
    
    -------------------------------------------------------------------------------
    Address 03: ABS Brakes        Labels: 8E0-614-517.lbl
       Part No: 8E0 614 517 A
       Component: ABS/ESP allrad      1726  
       Coding: 00000
       Shop #: WSC 00000  
       VCID: 26150809E1FD9CC7016-5216
    
    2 Faults Found:
    00778 - Steering Angle Sensor (G85) 
                66-10 - Not Matched - Intermittent
    01044 - Control Module Incorrectly Coded 
                35-00 -  - 
    
    -------------------------------------------------------------------------------
    Address 08: Auto HVAC        Labels: 8E0-820-043.lbl
       Part No: 8E0 820 043 AD
       Component:   A4 Klimaautomat   1219  
       Coding: 00000
       Shop #: WSC 63351  
       VCID: 6393511DD24F29EF268-513C
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 09: Cent. Elect.        Labels: 8E0-907-279-8E2.lbl
       Part No: 8E0 907 279 F
       Component: int. Lastmodul  USA 0517  
       Coding: 01013
       Shop #: WSC 63351  
       VCID: 3537DF452C5BE75FB8C-4B00
    
    1 Fault Found:
    01502 - Bulb for Rear Fog; Left (L46) 
                57-00 - Electric Circuit Failure
    
    -------------------------------------------------------------------------------
    Address 15: Airbags        Labels: 8E0-959-655-84.lbl
       Part No: 8E0 959 655 C
       Component: Airbag 8.4EP        2000  
       Coding: 0010607
       Shop #: WSC 63351 000 00000
       VCID: 372BD54D3357154FAA0-5184
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 16: Steering wheel        Labels: 8E0-953-549.lbl
       Part No: 8E0 953 549 N
       Component: Lenksáulenmodul     0308  
       Coding: 02041
       Shop #: WSC 63351  
       VCID: 3E25C069196D2407696-4B00
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 17: Instruments        Labels: 8E0-920-9xx-8E2.lbl
       Part No: 8E0 920 950 L
       Component: KOMBI+WEGFAHRS. RB4 D36  
       Coding: 03200
       Shop #: WSC 42336  
       VCID: 323DE459DD35F0679DE-5160
       WAULT68E14A008323     AUZ6Z0C0185488
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 36: Seat Mem. Drvr        Labels: 8E0-959-760.lbl
       Part No: 8E0 959 760 
       Component: Sitzmemory R2 F     0305  
       Coding: 00002
       Shop #: WSC 63351  
       VCID: 71BF2B5518838B7FA44-4B3C
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 46: Central Conv.        Labels:. 8E0-959-433-MAX.clb
       Part No: 8E0 959 433 BB
       Component: Komfortgerát T7B    1311  
       Coding: 11788
       Shop #: WSC 63351  
       VCID: 72BD24591DB5B0675DE-4B00
    
       Subsystem 1 - Part No: 8E1959801
       Component: Tőrsteuer.FS BRM 0003  
    
       Component: Tőrsteuer.BF BRM 0003  
    
    10 Faults Found:
    01134 - Alarm Horn (H12) 
                49-00 - No Communications
    00962 - Alarm via. Tilt Sensor 
                35-00 -  - 
    01368 - Alarm triggered by Luggage Compartment Switch 
                35-00 -  - 
    01369 - Alarm triggered by Hood Switch 
                35-00 -  - 
    01374 - Alarm triggered by Terminal 15 
                35-00 -  - 
    01371 - Alarm triggered by Door Contact Switch; Driver's Side 
                35-00 -  - 
    01572 - Alarm triggered by Door Contact Switch; Passenger Side 
                35-00 -  - 
    01559 - Drivers Door 
                59-10 - Can't Unlock - Intermittent
    01560 - Passenger Door 
                59-00 - Can't Unlock
    01333 - Door Control Module; Rear Left (J388) 
                80-00 - Single-Wire Operation
    
    -------------------------------------------------------------------------------
    Address 55: Headlight Range        Labels: 4Z7-907-357.lbl
       Part No: 4Z7 907 357 
       Component: dynamische LWR       D09  
       Coding: 00060
       Shop #: WSC 63351  
       VCID: 0451728137318ED77F2-4B3C
    
    1 Fault Found:
    00776 - Level Control System Sensor; Left Front (G78) 
                28-10 - Short to Plus - Intermittent
    
    -------------------------------------------------------------------------------
    Address 56: Radio        Labels: 8E0-035-1xx-56.lbl
       Part No: 8E0 035 195 H
       Component: symphony II NP2    0260   
       Coding: 01005
       Shop #: WSC 85504  
       VCID: 2C01FA21FF21A697D72-5042
    
    1 Fault Found:
    00878 - Connection to Speaker Front Left 
                36-10 - Open Circuit - Intermittent
    
    End----(Elapsed Time: 05:55, VBatt start/end: 12.3V/12.2V. VIgn 0.0V)------
    Last edited by Uwe; 10-06-2017 at 08:15 AM. Reason: CODE tags

  12. #10
    Verified VCDS User
    Join Date
    Sep 2017
    Location
    USA
    Posts
    97
    Post Thanks / Like
    so i get pass login, and coding, i fallow video to a T I enter 12345 for the 2nd row codes. then i click do it. next i go login again and enter the 40168 for the steering angle calibration, and click do it, and it just go back to main ABS screen. it does not take me to calibrate. also how can i turn wheel with car off. its really hard

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •