Coding ABS module (Bosch 5.7)

Apexmaster33 · Oct 1, 2017

Hello.
I just ordered the Ross tech cable. I need some help or how to code the ABS module on my 04 A4 Quattro.
Also with the cable is it possible to turn off the alarm or the beeping when locking/unlocking car?
Thank you

PetrolDave · Oct 1, 2017

The first step to getting help is to post a full Auto-Scan once you get your cable. That gives important information on what module hardware & firmware is fitted to your car.

Uwe · Oct 1, 2017

Yes, both of those things should be doable on a B6 A4. I would expect it to have a Bosch 5.7 ABS, so have a look at this page and watch the video linked at the bottom.

-Uwe-

Apexmaster33 · Oct 1, 2017

i read that I can do auto scan and copy the abs module, then paste it on the new one? but i already have the new module installed. I guess i can unplug the new one, and plug it on the old then do auto scan and copy.

Uwe · Oct 1, 2017

Codings on those Bosch 5.7 modules are short enough that Copy & Paste isn't really necessary. However, it would not be a bad idea to see what the old module's coding was. You don't need to do a full Auto-Scan for that; just [Select] -> [03-ABS] and you'll see the coding. If you'd like to save it, go to [Fault Codes] and [Save Codes] even if there aren't any. That will record all of that control module's ID data (including coding).

-Uwe-

Apexmaster33 · Oct 1, 2017

Great thank you for fast reply and help.

Apexmaster33 · Oct 5, 2017

hi guys, I received my Cable last night. im going to try to connect today . so Do I need to connect my old ABS module and do a autoscan 1st, or can I leave my new one in the car and fallow the procedure

Uwe · Oct 5, 2017

Let's start with a scan from the car in its current condition.

-Uwe-

Apexmaster33 · Oct 5, 2017

Code:

Thursday,05,October,2017,17:48:59:43295
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 17.8.0.1 (x64)  HEX-V2 CB: 0.4401.4
Data version: 20170721 DS276.2
www.Ross-Tech.com

Dealer/Shop Name: Atanas D

VIN: WAULT68E14A008323   License Plate: BFR6126
Mileage: 278430km-173008mi   Repair Order: RO#1


Chassis Type: 8E (8E - Audi A4/S4/RS4 B6/B7 (2001 > 2008))
Scan: 01 02 03 08 09 0F 11 15 16 17 18 25 36 37 45 46 55 56 57 65
          67 69 75 76 77
 
VIN: WAULT68E14A008323   Mileage: 278430km-173008miles
-------------------------------------------------------------------------------
Address 01: Engine        Labels: 06C-909-559-ASN.lbl
   Part No SW: 8E0 909 559 L    HW: 8E0 909 059 
   Component: 3.0L V6/5V      G   0010  
   Coding: 0016711
   Shop #: WSC 63351 000 00000
   VCID: 3E25C0691C6D2407696-5160

8 Faults Found:
17524 - Oxygen (Lambda) Sensor Heating; B1 S1 
            P1116 - 004 - Open Circuit - MIL ON
16684 - Random/Multiple Cylinder Misfire Detected 
            P0300 - 002 -  - Intermittent
16687 - Cylinder 3 
            P0303 - 002 - Misfire Detected - Intermittent
16690 - Cylinder 6 
            P0306 - 008 - Misfire Detected - Intermittent
16686 - Cylinder 2 
            P0302 - 002 - Misfire Detected - Intermittent
16688 - Cylinder 4 
            P0304 - 008 - Misfire Detected - Intermittent
16689 - Cylinder 5 
            P0305 - 008 - Misfire Detected - Intermittent
16685 - Cylinder 1 
            P0301 - 002 - Misfire Detected - Intermittent
Readiness: 0110 1001

-------------------------------------------------------------------------------
Address 03: ABS Brakes        Labels: 8E0-614-517.lbl
   Part No: 8E0 614 517 A
   Component: ABS/ESP allrad      1726  
   Coding: 00000
   Shop #: WSC 00000  
   VCID: 26150809E1FD9CC7016-5216

2 Faults Found:
00778 - Steering Angle Sensor (G85) 
            66-10 - Not Matched - Intermittent
01044 - Control Module Incorrectly Coded 
            35-00 -  - 

-------------------------------------------------------------------------------
Address 08: Auto HVAC        Labels: 8E0-820-043.lbl
   Part No: 8E0 820 043 AD
   Component:   A4 Klimaautomat   1219  
   Coding: 00000
   Shop #: WSC 63351  
   VCID: 6393511DD24F29EF268-513C

No fault code found.

-------------------------------------------------------------------------------
Address 09: Cent. Elect.        Labels: 8E0-907-279-8E2.lbl
   Part No: 8E0 907 279 F
   Component: int. Lastmodul  USA 0517  
   Coding: 01013
   Shop #: WSC 63351  
   VCID: 3537DF452C5BE75FB8C-4B00

1 Fault Found:
01502 - Bulb for Rear Fog; Left (L46) 
            57-00 - Electric Circuit Failure

-------------------------------------------------------------------------------
Address 15: Airbags        Labels: 8E0-959-655-84.lbl
   Part No: 8E0 959 655 C
   Component: Airbag 8.4EP        2000  
   Coding: 0010607
   Shop #: WSC 63351 000 00000
   VCID: 372BD54D3357154FAA0-5184

No fault code found.

-------------------------------------------------------------------------------
Address 16: Steering wheel        Labels: 8E0-953-549.lbl
   Part No: 8E0 953 549 N
   Component: Lenksáulenmodul     0308  
   Coding: 02041
   Shop #: WSC 63351  
   VCID: 3E25C069196D2407696-4B00

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments        Labels: 8E0-920-9xx-8E2.lbl
   Part No: 8E0 920 950 L
   Component: KOMBI+WEGFAHRS. RB4 D36  
   Coding: 03200
   Shop #: WSC 42336  
   VCID: 323DE459DD35F0679DE-5160
   WAULT68E14A008323     AUZ6Z0C0185488

No fault code found.

-------------------------------------------------------------------------------
Address 36: Seat Mem. Drvr        Labels: 8E0-959-760.lbl
   Part No: 8E0 959 760 
   Component: Sitzmemory R2 F     0305  
   Coding: 00002
   Shop #: WSC 63351  
   VCID: 71BF2B5518838B7FA44-4B3C

No fault code found.

-------------------------------------------------------------------------------
Address 46: Central Conv.        Labels:. 8E0-959-433-MAX.clb
   Part No: 8E0 959 433 BB
   Component: Komfortgerát T7B    1311  
   Coding: 11788
   Shop #: WSC 63351  
   VCID: 72BD24591DB5B0675DE-4B00

   Subsystem 1 - Part No: 8E1959801
   Component: Tõrsteuer.FS BRM 0003  

   Component: Tõrsteuer.BF BRM 0003  

10 Faults Found:
01134 - Alarm Horn (H12) 
            49-00 - No Communications
00962 - Alarm via. Tilt Sensor 
            35-00 -  - 
01368 - Alarm triggered by Luggage Compartment Switch 
            35-00 -  - 
01369 - Alarm triggered by Hood Switch 
            35-00 -  - 
01374 - Alarm triggered by Terminal 15 
            35-00 -  - 
01371 - Alarm triggered by Door Contact Switch; Driver's Side 
            35-00 -  - 
01572 - Alarm triggered by Door Contact Switch; Passenger Side 
            35-00 -  - 
01559 - Drivers Door 
            59-10 - Can't Unlock - Intermittent
01560 - Passenger Door 
            59-00 - Can't Unlock
01333 - Door Control Module; Rear Left (J388) 
            80-00 - Single-Wire Operation

-------------------------------------------------------------------------------
Address 55: Headlight Range        Labels: 4Z7-907-357.lbl
   Part No: 4Z7 907 357 
   Component: dynamische LWR       D09  
   Coding: 00060
   Shop #: WSC 63351  
   VCID: 0451728137318ED77F2-4B3C

1 Fault Found:
00776 - Level Control System Sensor; Left Front (G78) 
            28-10 - Short to Plus - Intermittent

-------------------------------------------------------------------------------
Address 56: Radio        Labels: 8E0-035-1xx-56.lbl
   Part No: 8E0 035 195 H
   Component: symphony II NP2    0260   
   Coding: 01005
   Shop #: WSC 85504  
   VCID: 2C01FA21FF21A697D72-5042

1 Fault Found:
00878 - Connection to Speaker Front Left 
            36-10 - Open Circuit - Intermittent

End----(Elapsed Time: 05:55, VBatt start/end: 12.3V/12.2V. VIgn 0.0V)------

Apexmaster33 · Oct 5, 2017

hey guys i fallowed the video provided but i am getting the these codes
Thursday,05,October,2017,18:12:41:43295
VCDS Version: Release 17.8.0 (x64) Running on Windows 10 x64
www.Ross-Tech.com
Atanas D
Address 03: ABS Brakes Labels: 8E0-614-517.lbl
Control Module Part Number: 8E0 614 517 A
Component and/or Version: 8E0614517A ABS/ESP allr
Software Coding: ad 1726
Work Shop Code:
VCID: 26150809E1ED9CC7016-5216
2 Faults Found:

00778 - Steering Angle Sensor (G85)
66-10 - Not Matched - Intermittent
01044 - Control Module Incorrectly Coded
35-00 - -

Apexmaster33 · Oct 5, 2017

so i get pass login, and coding, i fallow video to a T I enter 12345 for the 2nd row codes. then i click do it. next i go login again and enter the 40168 for the steering angle calibration, and click do it, and it just go back to main ABS screen. it does not take me to calibrate. also how can i turn wheel with car off. its really hard

Uwe · Oct 6, 2017

Apexmaster33 said:
hey guys i fallowed the video provided but i am getting the these codes
Thursday,05,October,2017,18:12:41:43295
VCDS Version: Release 17.8.0 (x64) Running on Windows 10 x64
www.Ross-Tech.com
Atanas D
Address 03: ABS Brakes Labels: 8E0-614-517.lbl
Control Module Part Number: 8E0 614 517 A
Component and/or Version: 8E0614517A ABS/ESP allr
Software Coding: ad 1726
Work Shop Code:
VCID: 26150809E1ED9CC7016-5216
2 Faults Found:

00778 - Steering Angle Sensor (G85)
66-10 - Not Matched - Intermittent
01044 - Control Module Incorrectly Coded
35-00 - -

Huh?

-Uwe-

Uwe · Oct 6, 2017

I believe these would be correct for this car (assuming it has PR code 1LT or 1LF for the brakes):
Login: 09395
Coding: 04495

-Uwe-

Apexmaster33 · Oct 7, 2017

yes it is 1LF for brakes. i will try again today and let you know.

Apexmaster33 · Oct 7, 2017

Hey guys so after input login and coding I get a numbers and letters on the soft code from 00000 to ad1726 but where it says shop# I still have nothing. So I'm not sure why this is happening. Im inputting the correct valued for login and code

Uwe · Oct 7, 2017

Scratching head. Never seen or heard of "ad1726" appearing in the coding field for one of these.

-Uwe-

stevecrk · Oct 7, 2017

In your autoscan, the component information is truncated.

"Component and/or Version: 8E0614517A ABS/ESP allrad 1726" would make sense.

Why the end of the component information is displayed in the software coding field?

Apexmaster33 · Oct 7, 2017

Not sure. What to do next or try??
What should I do?

Uwe · Oct 8, 2017

Every customer gets one free car-repair support ticket. I'm going to suggest you call us during business hours, open your free ticket, and have someone talk you through this over the phone. You'll need to to have your PC connected to the car when you call.

-Uwe-

Apexmaster33 · Oct 8, 2017

So I was able to get the correct code under soft code now and under shop# it say wsc00000. I also calibrate steering says ok. And showing no fault code but still have ABS light on.
Btw I also have issue w brake dash light flashing . book says it has to do with low brake fluid but I'm top up to max. I noticed with ignition when the brake light starts flashing it break connection between vsdc for a split second then it starts again

Coding ABS module (Bosch 5.7)

Verified VCDS User

Verified VCDS User

Benevolent Dictator

Verified VCDS User

Benevolent Dictator

Verified VCDS User

Verified VCDS User

Benevolent Dictator

Verified VCDS User

Verified VCDS User

Verified VCDS User

Benevolent Dictator

Benevolent Dictator

Verified VCDS User

Verified VCDS User

Benevolent Dictator

VCDS Distributor

Verified VCDS User

Benevolent Dictator

Verified VCDS User