Current Versions

   #421  

romad

Verified VCDS User
Verified
Joined
Feb 10, 2014
Messages
207
Reaction score
80
Location
Prescott, AZ
VCDS Serial number
C?ID=208765
Bump for CB V0.4631
* Fixes for feature code handling with certain interfaces
* Improvements for comms with wifi and with certain newer platforms
Not sure if it is updated or not.
Launched VCDS-Mobile in Safari 13.1.2 on my iMac and selected check for updates. It found V0.4631 and started the download going through 3 steps:
1. Download
2. Verify
3. Extract files

All 3 ran successfully it appears.

However the next screen that came up in the window, was this one



And it has stayed that way for the last hour. On the Hex-Net LED1 is dark, LED2 is solid green, and LED3 is flashing green.

Edit. OK, I canceled out and started again. This time I'm told ETA: ~2 hours so I'll let it run and see what is what in 2 - 3 hours.

Edit 2. Well it ran through the 3 steps (apparently successfully) in only 35 minutes instead of the predicted 2 hours. It has gone into the ASAM Update screen again so we'll see what happens.

Edit 3. OK it is 3 hours later and I still have the same screen as above. Why is it not updating?
 
Last edited:
   #422  

rs38

Verified VCDS User
Verified
Joined
Jul 5, 2022
Messages
38
Reaction score
6
Location
Germany
VCDS Serial number
C?ID=519578
where can I find a change log for the new v23.3 ?
 
   #423  

romad

Verified VCDS User
Verified
Joined
Feb 10, 2014
Messages
207
Reaction score
80
Location
Prescott, AZ
VCDS Serial number
C?ID=208765
Not sure if it is updated or not.
Launched VCDS-Mobile in Safari 13.1.2 on my iMac and selected check for updates. It found V0.4631 and started the download going through 3 steps:
1. Download
2. Verify
3. Extract files

All 3 ran successfully it appears.

However the next screen that came up in the window, was this one



And it has stayed that way for the last hour. On the Hex-Net LED1 is dark, LED2 is solid green, and LED3 is flashing green.

Edit. OK, I canceled out and started again. This time I'm told ETA: ~2 hours so I'll let it run and see what is what in 2 - 3 hours.

Edit 2. Well it ran through the 3 steps (apparently successfully) in only 35 minutes instead of the predicted 2 hours. It has gone into the ASAM Update screen again so we'll see what happens.

Edit 3. OK it is 3 hours later and I still have the same screen as above. Why is it not updating?

Bueller? Bueller? Bueller?
 
   #425  

Sebastian

Ross-Tech Employee
Staff member
Ross-Tech Employee
Joined
Feb 13, 2014
Messages
2,670
Reaction score
2,987
Location
Magdeburg, Germany
VCDS Serial number
HN0-nnnnnn
Many changes are DoIP related, some are more broader as to compatibility with certain modules and of course updated ASAM/ODX data as well as label files etc. - @Uwe is in charge of the public changelog.
 
   #428  

Shaun

Active Member
Ross-Tech Employee
Joined
Jan 29, 2014
Messages
1,616
Reaction score
2,527
Location
USA
Bump for beta CB V0.4639
* Improvements for VIN handling on certain platforms
* Comms and formatting fixes for certain platforms
* Support for ROD files with very long names

and beta DS's
DS 00000064
* Improvements for gw list

DS 20000063
* New rod data (DS337)
* Support for init options in mobile (bypass DoIP, bypass CAN etc.)

DS 20000062
* New rod data (DS325)
* Improvements to in-file timestamping

DS 20000061
* New rod data (DS325)
 
   #429  

Shaun

Active Member
Ross-Tech Employee
Joined
Jan 29, 2014
Messages
1,616
Reaction score
2,527
Location
USA
Bump for beta CB V0.4643
* Fix for select list on certain platforms
* Fix for VIN forgotten after ASAM update check
* Fixes for comm status results on certain platforms
 
   #430  

Spacewalker

Verified VCDS User
Verified
Joined
Jun 10, 2014
Messages
1,247
Reaction score
848
Location
Poland
VCDS Serial number
C?ID=159607
anyone can look why I can not download ASAM update ?
5 min awaing time and still nothing, reset mobile data, reset phone, use differente mobile data, re-connect Hex Next.
while connect to ECU, I see pop up message with warning "no asam data found localy" and checking update
then I see - update available , click download and waiting .....5 min later show 0kb
network test PING is 150-180ms
 
   #431  

Shaun

Active Member
Ross-Tech Employee
Joined
Jan 29, 2014
Messages
1,616
Reaction score
2,527
Location
USA
Have you tried using VCIConfig?
 
   #433  

Dana

Administrator
Staff member
Administrator
Ross-Tech Employee
Joined
Jan 29, 2014
Messages
5,970
Reaction score
8,954
Location
Western PA, USA
Is that function exist in APP ? because right now I can only use APP in there ,
Good morning,

VCIConfig is the Windows based app that launches from VCDS after clicking Program Options > Config. It needs to be used via USB (no car required) and the Update tab should download RODs.

If that isn't working properly I can email you instructions so we can try to do a full reset of the internal SD card.
 
  • Like
Reactions: Uwe
   #434  

Shaun

Active Member
Ross-Tech Employee
Joined
Jan 29, 2014
Messages
1,616
Reaction score
2,527
Location
USA
Bump for CB V0.4643 now on release.
CB V0.4643
* Fix for VIN forgotten after ASAM update check
* Fixes for comms with certain platforms
* Fixes for VIN handling with certain platforms
 
   #435  

rs38

Verified VCDS User
Verified
Joined
Jul 5, 2022
Messages
38
Reaction score
6
Location
Germany
VCDS Serial number
C?ID=519578
is there a changelog from current release 23.11 compared to last release (afaik) 23.3.1 ?
 
   #436  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,902
Reaction score
33,625
Location
USA
VCDS Serial number
HC100001
   #438  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,902
Reaction score
33,625
Location
USA
VCDS Serial number
HC100001
would take your team 10 minutes to make it up2date.
As I've explained before, we're tired of having every clone-seller in the world copy & paste from there verbatim.

-Uwe-
 
Back
Top