Current Versions

   #361  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,902
Reaction score
33,624
Location
USA
VCDS Serial number
HC100001
guys, is there any way why my Hexnet today strat give continuously beep .. and red indicators start blinking 1 by 1
it happen when I connect it to OBD
all is ok as far as I know, diagnostic, ...but noise from :facepalm:
19.4 version
I believe continuous beeping and red blinking when connected to OBD is supposed to mean a shorted K-Line at the OBD-II connector. What do you get when you do [Options] -> [Test] in VCDS?

-Uwe-
 
   #362  

Spacewalker

Verified VCDS User
Verified
Joined
Jun 10, 2014
Messages
1,247
Reaction score
848
Location
Poland
VCDS Serial number
C?ID=159607
I believe continuous beeping and red blinking when connected to OBD is supposed to mean a shorted K-Line at the OBD-II connector. What do you get when you do [Options] -> [Test] in VCDS?

-Uwe-

I use on omy bench test loom, when is no Kline wire
CAN testting
K1 ok
K2 ok
Vbat 12V
Vign 10.5v


Now is only one LED bliking ,
when 2 was bliking (2 narrow) I let device connected for some time
after I back - was silent ;)
 
   #363  

Shaun

Active Member
Ross-Tech Employee
Joined
Jan 29, 2014
Messages
1,616
Reaction score
2,527
Location
USA
Bump for beta CB V0.4507
* More CAN broadcast filtering
 
   #365  

Shaun

Active Member
Ross-Tech Employee
Joined
Jan 29, 2014
Messages
1,616
Reaction score
2,527
Location
USA
Bump for CB V0.4513 on beta channel
* Updated chassis info
* Fixes for ASAM functions
 
   #367  

Shaun

Active Member
Ross-Tech Employee
Joined
Jan 29, 2014
Messages
1,616
Reaction score
2,527
Location
USA
Bump for beta CB V0.4543
* Comms improvements for ID.3 platform
* Fixes for 29bit OBDII addresses
* New addresses
 
   #369  

Shaun

Active Member
Ross-Tech Employee
Joined
Jan 29, 2014
Messages
1,616
Reaction score
2,527
Location
USA
Bump for CB V0.4544 now on release
* Fix for TP1.6 1281 comms
 
   #370  

stefdds

Verified VCDS User
Verified
Joined
Apr 13, 2015
Messages
2,210
Reaction score
1,759
Location
USA
VCDS Serial number
C?ID=174556
Thank you, "update successful" ; test / save also OK.
 
   #371  

Shaun

Active Member
Ross-Tech Employee
Joined
Jan 29, 2014
Messages
1,616
Reaction score
2,527
Location
USA
Bump for beta CB V0.4548
* Fixes for LT3 comms
* Support for ID.4 fallback address ranges
* Fix for a timer wrap when logging
* Fix for unit being included with the value in some mv logs
 
   #374  

Shaun

Active Member
Ross-Tech Employee
Joined
Jan 29, 2014
Messages
1,616
Reaction score
2,527
Location
USA
Bump for beta CB V0.4555
* Fix for registration issue
 
   #375  

Jacek

Verified VCDS User
Verified
Joined
Mar 19, 2019
Messages
150
Reaction score
134
Location
Poland
VCDS Serial number
C?ID=360566
Hello, after updating to CB V0.4555, the automatic scan does not open in the "gateway instalation list" in ver.21.3.0, in beta 21.8.2 it is ok.
 
   #376  

Eric

Active Member
Staff member
Ross-Tech Employee
Joined
Jan 29, 2014
Messages
3,892
Reaction score
5,780
Location
Lansdale, PA, USA
VCDS Serial number
HC800000
The new codeblock is going to have issues with older VCDS versions over WiFi. Until we have a new release on Sept 1st, please use either the Beta Wifi/USB or the Release over USB only.
 
Last edited:
   #377  

Jacek

Verified VCDS User
Verified
Joined
Mar 19, 2019
Messages
150
Reaction score
134
Location
Poland
VCDS Serial number
C?ID=360566
Ok
 
   #378  

Shaun

Active Member
Ross-Tech Employee
Joined
Jan 29, 2014
Messages
1,616
Reaction score
2,527
Location
USA
Bump for CB V0.4555 now on release. Cumulative changelog since last release:
* Fixes for LT3 comms
* Support for ID.4 fallback address ranges
* Fixes for measuring value logging
* OBDII fixes
* Fix for Clear all DTCS

HN2- FW V1.64 now on release
* Updated wifi fw and routines
* Fix for DoIP init
 
   #379  

Jacek

Verified VCDS User
Verified
Joined
Mar 19, 2019
Messages
150
Reaction score
134
Location
Poland
VCDS Serial number
C?ID=360566
Ver.21.9 works ok, they work on the Polish version 21.3, it still does not work with wifi only with a usb cable.
And this is probably not what HEX-NET is about.
 
   #380  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,902
Reaction score
33,624
Location
USA
VCDS Serial number
HC100001
Ver.21.9 works ok, they work on the Polish version 21.3, it still does not work with wifi only with a usb cable.
This is a known backwards compatibility issue; CB 0.4555 may not work properly with 21.3 and older versions when used with a HEX-NET on WiFi. There are two possible work-arounds until a translated 21.9 is available:
1) Use the translated version with the HEX-NET via USB
2) Use the English version 21.9

-Uwe-
 
Back
Top