Page 37 of 37 FirstFirst ... 27353637
Results 361 to 365 of 365

Thread: Current Versions

  1. #361
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    24,208
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by Spacewalker View Post
    guys, is there any way why my Hexnet today strat give continuously beep .. and red indicators start blinking 1 by 1
    it happen when I connect it to OBD
    all is ok as far as I know, diagnostic, ...but noise from
    19.4 version
    I believe continuous beeping and red blinking when connected to OBD is supposed to mean a shorted K-Line at the OBD-II connector. What do you get when you do [Options] -> [Test] in VCDS?

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  2. #362
    Verified VCDS User Spacewalker's Avatar
    Join Date
    Jun 2014
    Location
    Poland
    Posts
    731
    Post Thanks / Like
    Quote Originally Posted by Uwe View Post
    I believe continuous beeping and red blinking when connected to OBD is supposed to mean a shorted K-Line at the OBD-II connector. What do you get when you do [Options] -> [Test] in VCDS?

    -Uwe-
    I use on omy bench test loom, when is no Kline wire
    CAN testting
    K1 ok
    K2 ok
    Vbat 12V
    Vign 10.5v


    Now is only one LED bliking ,
    when 2 was bliking (2 narrow) I let device connected for some time
    after I back - was silent
    HOT HOT HOT VW Touran 2005 with ACC HOT HOT HOT

  3. #363
    Ross-Tech Employee
    Join Date
    Jan 2014
    Location
    USA
    Posts
    828
    Post Thanks / Like
    Bump for beta CB V0.4507
    * More CAN broadcast filtering

  4. Likes Eric, Uwe liked this post
  5. #364
    Ross-Tech Employee
    Join Date
    Jan 2014
    Location
    USA
    Posts
    828
    Post Thanks / Like
    Bump for CB V0.4508 now on release channel
    * More CAN broadcast filtering to reduce USB load
    Last edited by Shaun; 06-27-2019 at 05:47 PM.

  6. Likes Uwe, Eric, _Val, PetrolDave liked this post
  7. #365
    Ross-Tech Employee
    Join Date
    Jan 2014
    Location
    USA
    Posts
    828
    Post Thanks / Like
    Bump for CB V0.4513 on beta channel
    * Updated chassis info
    * Fixes for ASAM functions

  8. Likes Uwe, Mats@MFT, henbo liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •