Page 3 of 3 FirstFirst 123
Results 21 to 24 of 24

Thread: MK6 HVAC controls in MK5?

  1. #21
    Verified VCDS User golfi_vend's Avatar
    Join Date
    Apr 2014
    Location
    Tartu, Estonia
    Posts
    2,121
    Post Thanks / Like
    Who says you can't buy it separate?

    Denso and Valeo:


    I am a VW Freak - Le WV Freaks OR Come visit me at my work with ODIS concerns - FORSS ODIS GeKo/FaZit access for VW/AUDI/Škoda
    The world is my oyster...

  2. Likes downtime, Uwe, Blade3562 liked this post
  3. #22
    Verified VCDS User
    Join Date
    May 2017
    Location
    Finland
    Posts
    1,772
    Post Thanks / Like
    I never found the part number Looks like it is possible to buy separately. That's good.

    I found the complete heater matrix from ebay very cheap so it didn't matter

  4. #23
    Verified VCDS User
    Join Date
    Mar 2017
    Location
    Denmark
    Posts
    87
    Post Thanks / Like
    I've got this installed in my MK5 Golf MY05 all working correctly

    You just need to swap 8-10 wires to make everything work. This is a Passat panel.

    Only got a picture when it's dark.

  5. #24
    Verified VCDS User
    Join Date
    May 2017
    Location
    Finland
    Posts
    1,772
    Post Thanks / Like
    And you have two motor air recirculation flap? You have visually checked that both flaps move simultaneously and they do that when swapping between recirculation and fresh air mode? And you don't have error codes in clima panel saying flap xxx stuck?
    All I got was either the flaps got stuck in the middle of their cycle. They worked ok for a while when I cleared errors with VCDS. After a while they got stuck again.

    And boy I tried different tricks to make them work

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •