Beta 15.1.0 is available here so please try it and let us know either way.
Beta 15.1.0 is available here so please try it and let us know either way.
Bummer. We sorta figured that but it was worth a shot.
Bummer. We sorta figured that but it was worth a shot.
Dana: is the suspected cable issue peculiar to the micro CAN? If so, could "age13" try polling the BCM with a CAN+HEX ( or a HEX NET) before he/she buys another unit? Second question - how does "age13" get the coding for his/her new BCM if the original coding for his/her current unit is lost?
Dana: is the suspected cable issue peculiar to the micro CAN? If so, could "age13" try polling the BCM with a CAN+HEX ( or a HEX NET) before he/she buys another unit? Second question - how does "age13" get the coding for his/her new BCM if the original coding for his/her current unit is lost?
Bummer. We sorta figured that but it was worth a shot.
One of the slaves of module 09 is causing module 09 to make the scan tool wait indefinitely when we request identification. VCDS is trying to break out of that wait, but the module refuses any further request since it's still (presumably) waiting on that slave. Not sure where you go from there, could be an actual slave malfunctioning, the wiring to it, or any coding/adaptation change you made...
Trying the upcoming beta and generating debugs certainly won't hurt, but I'm afraid (having looked at debugs of this particular issue earlier in the thread) that the problem really sits module-side in this case.
Adrian: Hmm- isn't it great to have the wise folk at RT watching over us in the back ground? They are like a warm cuddly toy- comforting and safe! A kind of in-built "Linus blanket" that comes wrapped-up with every registered cable!!
Just like a nanny cam, lol. Ok so is the part number I listed earlier the one I need or should I get a newer version?
Was there ever a fix found for the non responding central electronics module?? I have a '12 GTI with the exact same symptoms and issues described in this thread. Nothing i try has worked and I'm still locked out and auto scan just freezes until I manually bypass it. ANY help of finally fixing this is appreciated!!
Did you end up buying a new CECM?
Thanks!!
Brian
If any of them are close enough to bring their car and their computer to RT's HQ, that would give us a much better shot at sorting this.Many folks have contacted me over this on this and other sites after posting.
If any of them are close enough to bring their car and their computer to RT's HQ, that would give us a much better shot at sorting this.
-Uwe-
Unfortunately no change on my scenario. I will say this seems to be more common then we realize. Many folks have contacted me over this on this and other sites after posting. At this point I have just gotten used to the fact that module 9 is off limits to me. Everything else works fine.
If any of them are close enough to bring their car and their computer to RT's HQ, that would give us a much better shot at sorting this.
-Uwe-