Page 1 of 3 123 LastLast
Results 1 to 10 of 23

Thread: Led Bulbs in License Plate and Error Code

  1. #1
    Verified VCDS User
    Join Date
    Aug 2014
    Posts
    20
    Post Thanks / Like

    Led Bulbs in License Plate and Error Code

    Hello, Newbie here

    I just installed 6 different sets of Led bulbs(From the cheap ones to the expensive type) in my license plate(My car is a Seat Leon FR Super Copa 2013) and all of them drop an error code....need help to shut off the error code using the VCDS but don't know how to do it, please help!!

    Thanks!
    Last edited by Mexicano; 08-25-2014 at 01:04 PM.

  2. #2
    Ross-Tech Employee
    Join Date
    Jan 2014
    Location
    Near Philadelphia, PA, USA
    Posts
    1,144
    Post Thanks / Like
    Blog Entries
    3
    Hi Mexicano. Welcome to the forum. To get assistance, please post an autoscan of the car. Wrap it in to post it here.

  3. #3
    Verified VCDS User
    Join Date
    Aug 2014
    Posts
    20
    Post Thanks / Like
    Thanks Bruce!..I will post it ASAP

  4. #4
    Verified VCDS User
    Join Date
    Aug 2014
    Posts
    20
    Post Thanks / Like
    Hi Again, Bruce!..This is what I got:

    Monday,25,August,2014,09:56:13:40443
    VCDS -- Windows Based VAG/VAS Emulator
    VCDS Version: 12.12.2.0
    Data version: 20140212


    Mileage: Repair Order: 08-25-12 license plate bulbs



    --------------------------------------------------------------------------------
    --------------------------------------------------------------------------------


    Address 09: Cent. Elect. Labels: 1K0-937-08x-09.clb
    Control Module Part Number: 5K0 937 087 AA HW: 5K0 937 087 AA
    Component and/or Version: BCM PQ35 H+ 121 0168
    Software Coding: 4C180A3E8037B0C042080080950089C442550008627D896000 8040000040
    Work Shop Code: WSC 04941 000 00000
    VCID: 74E7C4F9D726D4BE8FF-8021
    1 Fault Found:

    01504 - Bulb for License-Plate Light (X)
    010 - Open or Short to Plus
    Freeze Frame:
    Fault Status: 01101010
    Fault Priority: 2
    Fault Frequency: 1
    Reset counter: 215
    Mileage: 6079 km
    Time Indication: 0
    Date: 2024.14.14
    Time: 09:56:03

    Freeze Frame:
    Term 15 On
    Voltage: 14.35 V
    ON
    ON
    OFF
    OFF
    OFF


    --------------------------------------------------------------------------------
    --------------------------------------------------------------------------------


    Address 09: DTCs cleared

  5. #5
    Verified VCDS User
    Join Date
    Feb 2014
    Location
    Romania
    Posts
    50
    Post Thanks / Like
    Did you try codding the bcm by checking the bite with cold bulbs diagnose active? Or similar option wich refer to cold bulbs.

  6. Likes jakematic liked this post
  7. #6
    Verified VCDS User
    Join Date
    Aug 2014
    Posts
    20
    Post Thanks / Like
    Quote Originally Posted by pronet View Post
    Did you try codding the bcm by checking the bite with cold bulbs diagnose active? Or similar option wich refer to cold bulbs.
    No....I guess I'm too Newbie for that but if You help me and guide to the process I could try...I will appreciate Your help on this.

    Thanks

  8. #7
    Verified VCDS User
    Join Date
    Jun 2014
    Location
    Netherlands
    Posts
    175
    Post Thanks / Like
    In my case: module 09 (Central Electronics), byte 18, bit 0 (I have no led/error so I leave it this way )

    Golf VII, 1.6TDI BM Ed. 40 - 110 PK

  9. #8
    Verified VCDS User
    Join Date
    Feb 2014
    Location
    Romania
    Posts
    50
    Post Thanks / Like
    I assume that your BCM is similar to Octavia III or Golf VII - in that case you have to do the following steps:
    -> Controller 09 - Central Electronics
    -> 16 - Security Access - enter 31347
    -> 10 - Adaptations
    Change the 2 channels as:
    (1)-Leuchte25KZL HA59-Lasttyp 25 - set to 43 - allgemeine LED
    (6) Leuchte25KZL HA59 - Dimmwert AB 25 - set to 127

  10. #9
    Verified VCDS User
    Join Date
    Feb 2014
    Location
    Romania
    Posts
    50
    Post Thanks / Like
    @Mari: your 09 is quite different from what Mexicano has. Centr.electr/ BCM. For Golf V is OK. For Golf VI: License Plate Lighting w/o Pulse Width Modulation (PWM) [LED Lighting] - this is the byte that have to be changed - marked. If I'm wrong please accept my apologies and I request to admin staff to modify my post.

  11. #10
    Verified VCDS User
    Join Date
    Aug 2014
    Posts
    20
    Post Thanks / Like
    Quote Originally Posted by pronet View Post
    I assume that your BCM is similar to Octavia III or Golf VII - in that case you have to do the following steps:
    -> Controller 09 - Central Electronics
    -> 16 - Security Access - enter 31347
    -> 10 - Adaptations
    Change the 2 channels as:
    (1)-Leuchte25KZL HA59-Lasttyp 25 - set to 43 - allgemeine LED
    (6) Leuchte25KZL HA59 - Dimmwert AB 25 - set to 127
    Thanks!..Is that for Lisence Plate lights?...my car already has LED rear lights from factory..

    The controller refused the 31347 Key anywas...
    Last edited by Mexicano; 08-26-2014 at 02:53 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •