- Joined
- Aug 11, 2014
- Messages
- 1
- Reaction score
- 0
- VCDS Serial number
- C?ID=222153
This bit me today. I had installed VCDS on Fusion on an Apple laptop. The testing of the interface passed with no problems.
So, I tried to clear these errors:
02511 - Control Module for Seat Occupied Recognition (J706)
005 - No or Incorrect Basic Setting / Adaptation - MIL ON
Went through trying to do a Basic Reset (. The software would talk for a bit with the airbag controller and then threw errors saying that it had lost connection. It led us to believe that the seat occupancy sensor controller was bad.
With advice from the tech support, I installed the VCDS on a PC and tried again. The reset worked like a charm.
So, don't install VCDS on Apple ... unless it is running in BootCamp mode.
Cheers
-Doru
So, I tried to clear these errors:
02511 - Control Module for Seat Occupied Recognition (J706)
005 - No or Incorrect Basic Setting / Adaptation - MIL ON
Went through trying to do a Basic Reset (. The software would talk for a bit with the airbag controller and then threw errors saying that it had lost connection. It led us to believe that the seat occupancy sensor controller was bad.
With advice from the tech support, I installed the VCDS on a PC and tried again. The reset worked like a charm.
So, don't install VCDS on Apple ... unless it is running in BootCamp mode.
Cheers
-Doru