- Joined
- May 5, 2015
- Messages
- 316
- Reaction score
- 182
- Location
- Copenhagen, Denmark
- VCDS Serial number
- C?ID=78998
This is how the A4 B9 is coded - maybe it is the same on the Q7 - just with Q7 instead of A4:Thanks no problem Dana, I tested it's ok now, I did ''back'' and the ''bottom left of the silver keys'' to go in the hidden green menu. But unfortunately the green menu is poor, I cannot modify the splash screen of the HMI :-(?
Do you have a tips for that? and about VIM?
thanks.
Code:
[17 - Instruments]
[Coding - 07] -> [Long Coding Helper] -> Byte 9
A4 (small logo): Bit 5 and 7 - Set this bit manually to “1”
A4 (large logo): Bit 0, 5 and 7 - Set these bits manually to “1”
A4 L: Bit 1, 5 and 7 - Set these bits manually to “1”
A4 quattro: Bit 0, 1, 5 and 7 - Set these bits manually to “1”
A4 g-tron: Bit 2, 5 and 7 - Set these bits manually to “1”
A4 L quattro: Bit 0, 2, 5 and 7 - Set these bits manually to “1”
A4 (large logo): Bit 1, 2, 5 and 7 - Set these bits manually to “1”
A4 g-tron quattro: Bit 0, 1, 2, 5 and 7 - Set these bits manually to “1”