- Joined
- Nov 10, 2014
- Messages
- 400
- Reaction score
- 392
- Location
- Oxford, UK
- VCDS Serial number
- C?ID=226919
Quick question. When an Auto-Scan is done, at the top it lists a load of module numbers. Is VCDS using some kind of intelligence to gather this list or is it simply just looking in the CAN Gateway "Installation List" for any items that have been ticked as being installed?
Code:
Chassis Type: 1P (7N0)
Scan: 01 02 03 08 09 10 15 16 17 19 25 2E 37 42 44 46 52 55 56 62
72
VIN: VSSZZZ1PZCRXXXXXX Mileage: 39360km-24457miles
01-Engine -- Status: OK 0000
02-Auto Trans -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
2E-Media Player 3 -- Status: OK 0000
37-Navigation -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
55-Headlight Range -- Status: OK 0000
56-Radio -- Status: OK 0000
62-Door, Rear Left -- Status: OK 0000
72-Door, Rear Right -- Status: OK 0000