Page 2 of 8 FirstFirst 1234 ... LastLast
Results 11 to 20 of 72

Thread: Audi Q3 TPMS enabling

  1. #11
    Verified VCDS User
    Join Date
    Apr 2017
    Location
    Yuengling Country
    Posts
    143
    Post Thanks / Like
    Thank you, D-Dub, I think I just managed to do it, see post above yours.
    I was in the same boat - why wouldn't they enable it if the hardware supports it?!?!?

    Now I just need to find a way to enable the reset menu in MMI.
    I just found a post that says the green menu can't be enabled on the non-NAV radios, which is what I have.

    I am still hopeful that it can be enabled through VCDS.
    2017 Q3 Quattro, 2012 Tiguan 4Motion

  2. #12
    Verified VCDS User
    Join Date
    Apr 2017
    Location
    Yuengling Country
    Posts
    143
    Post Thanks / Like
    Hmmm, I found an interesting post http://www.audi-sport.net/xf/threads...mental.216661/ that shows some adaptations for 5F.

    Could that work for mine? If so, how can I get to those? I haven't seen any such lists in VCDS.

    Thank you for any clues.
    2017 Q3 Quattro, 2012 Tiguan 4Motion

  3. #13
    VCDS Distributor
    Join Date
    Feb 2014
    Location
    Denmark
    Posts
    1,431
    Post Thanks / Like
    Please when you (and a lot of other people) look in the forums, look carefully what is written about models, year, software etc.
    Your link describes an Audi A3 (8V), it is not like your Audi Q3, it uses for example UDS protocol (Like what your [03-ABS] is using) in [5F].

    Have you tried what I wrote ?

  4. Likes Uwe liked this post
  5. #14
    Verified VCDS User
    Join Date
    Apr 2017
    Location
    Yuengling Country
    Posts
    143
    Post Thanks / Like
    Quote Originally Posted by NEtech View Post
    Please when you (and a lot of other people) look in the forums, look carefully what is written about models, year, software etc.
    Your link describes an Audi A3 (8V), it is not like your Audi Q3, it uses for example UDS protocol (Like what your [03-ABS] is using) in [5F].

    Have you tried what I wrote ?
    Hello NEtech,

    Please have a look at my post #9 on the previous page.
    I am very grateful to you for your help, but it seems to me you only read the last post and not my previous reply. So I can't be mad at you.

    In short, yes, I know cars are different, but I am hanging on to every bit of information right now. Additionally, while I learn the lingo and how this works, everything that looks relevant is peaking my interest.

    And yes, I tried what you said and it partially worked.
    My beer offer still stands...

    Thank you very much. Please see my reply on page 1, post #9
    Last edited by somedude; 04-23-2017 at 08:59 AM. Reason: spelling
    2017 Q3 Quattro, 2012 Tiguan 4Motion

  6. #15
    Verified VCDS User
    Join Date
    Apr 2017
    Location
    Yuengling Country
    Posts
    143
    Post Thanks / Like
    There was a post that just disappeared, with info on the non-MMI radio.
    I don't have code 56- Radio on my car, probably the reason for the post being removed.
    Thank you very much.
    2017 Q3 Quattro, 2012 Tiguan 4Motion

  7. #16
    Verified VCDS User rlarsen's Avatar
    Join Date
    May 2015
    Location
    Copenhagen, Denmark
    Posts
    260
    Post Thanks / Like
    Quote Originally Posted by somedude View Post
    There was a post that just disappeared, with info on the non-MMI radio.
    I don't have code 56- Radio on my car, probably the reason for the post being removed.
    Thank you very much.
    Yes, correct - it was nor relevant to you after all
    Rene Larsen

    Audi A4 Avant 3.0 TDI quattro tiptronic MY2009 - sold
    VCDS 18.9.0
    (HEX-V2)

  8. #17
    Verified VCDS User rlarsen's Avatar
    Join Date
    May 2015
    Location
    Copenhagen, Denmark
    Posts
    260
    Post Thanks / Like
    Quote Originally Posted by somedude View Post
    Hello everybody,


    I have a 2017 Q3 base model.
    The main reason I got the HEX-V2 is to enable TMPS.
    My Pontiac had it 10 years ago and it was the real TMPS not the fake ABS relative speed one.

    I tried to enable it though VCDS following some instructions on the web, by enabling the green menu first.
    That didn't work, 5F, Channel 06 remains at 0 even though I tried to set it to 1 and it said OK.

    [...]
    Maybe you need the new label file Dana did in this thread - http://forums.ross-tech.com/showthre...Developer-Mode ??
    Rene Larsen

    Audi A4 Avant 3.0 TDI quattro tiptronic MY2009 - sold
    VCDS 18.9.0
    (HEX-V2)

  9. #18
    Verified VCDS User
    Join Date
    Apr 2017
    Location
    Yuengling Country
    Posts
    143
    Post Thanks / Like
    Quote Originally Posted by rlarsen View Post
    Maybe you need the new label file Dana did in this thread - http://forums.ross-tech.com/showthre...Developer-Mode ??

    Mmmmmm .... doughnuts .... aaarrrrrrgggggghhhhhh

    Imagine Homer, that's me right now at the thought of getting this solved.

    Thank you.
    2017 Q3 Quattro, 2012 Tiguan 4Motion

  10. #19
    VCDS Distributor
    Join Date
    Feb 2014
    Location
    Denmark
    Posts
    1,431
    Post Thanks / Like
    Quote Originally Posted by somedude View Post
    Thank you very much. Please see my reply on page 1, post #9
    Sorry, saw only new replies on page 2.

    Did you activate [4C] in [19] Gateway list coding ?

    Can you please post an new Autoscan, after driving some days.

    If the Byte 18 is correct for TMPS, then D5 should be for PR-code 7K6 and D7 should be for PR-code 7K1
    42FF269F492143702077420964C592C20424D500508B4883
    42FF269F492143702077420964C592C20424D700508B4883
    I suggested 7K6 because that has US model 2017, older model years (European) use 7K1.
    You could try D7, if there is no indication of TMPS after driving some days.

    Do you have some active adaption channels and measurement values, regarding TMPS ?

  11. Likes Uwe liked this post
  12. #20
    Verified VCDS User
    Join Date
    Apr 2017
    Location
    Yuengling Country
    Posts
    143
    Post Thanks / Like
    Sorry, I was so excited seeing the TPMS icon light up, I totally missed that step for module 19.
    Would you mind providing details, I can't figure out what marker 4c means.

    Total newbie here, when you say "indication of TPMS" after driving, does that mean driving with an underinflated tire?

    And your final question, regarding adaptations, I have no idea what that means. I didn't make any other changes. I will try to read up on measurements, sounds like something in VCDS.

    Thank you very much for taking the time to help me.
    Once this is complete, I will summarize it in a new post with step by step, for the benefit of others.
    Last edited by somedude; 04-23-2017 at 11:45 AM.
    2017 Q3 Quattro, 2012 Tiguan 4Motion

  13. Likes Uwe liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •