Search:

Type: Posts; User: coconutaudi

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. Replies
    22
    Views
    799

    1990loyale, any update on your module recoding? ...

    1990loyale, any update on your module recoding?

    Thanks
  2. Replies
    22
    Views
    799

    Wow! I thought the process is straightforward as...

    Wow! I thought the process is straightforward as described in the manual. Thank you for the warning myounus.
  3. Replies
    22
    Views
    799

    When or at what stage do we need to enter this...

    When or at what stage do we need to enter this long coding? Is this the same as restoring the raw hex?
  4. Replies
    22
    Views
    799

    I've been following the discussion between you...

    I've been following the discussion between you and myounus and would like to learn more. I've read in the wiki that you can set a replacement module coding with existing coding using the raw hex in...
  5. https://imgur.com/uNh44Nf.jpg I found this CAN...

    https://imgur.com/uNh44Nf.jpg

    I found this CAN bus diagram which shows J431 and J852 next to each other. Not sure what to make out of it. Is J852 is the control module at fault? Loose connectors...
  6. Thank you myounus, I will try my luck with the...

    Thank you myounus, I will try my luck with the audi dealers around my area. BTW which module should I upgrade, the headlight range or the onboard camera?
  7. I personally have never changed or mapped...

    I personally have never changed or mapped anything, but like I’ve said the car was imported used after being reconditioned in England. Somebody may or may not have done something there, I don¬’t...
  8. Hi, I donít know whether I can get a software...

    Hi,
    I donít know whether I can get a software upgrade since my car is an imported used from England. The audi dealership here only entertain vehicles bought from them. I did not do any tweaking...
  9. I was thinking CAN in the message should refer to...

    I was thinking CAN in the message should refer to Controller Area Network and therefore DLC should be interpreted Data Link Connector. Like you said it may not refer to the same thing.

    BTW, I've...
  10. Some more clues (maybe): 1. Just out of...

    Some more clues (maybe):

    1. Just out of curiosity, I've tried to implement the Headlight Adjustment under Diagnostic Procedure with VCDS (wiki.ross-tech) to see what is the outcome.
    I managed...
  11. Replies
    4
    Views
    163

    Thank you PetrolDave

    Thank you PetrolDave
  12. Replies
    4
    Views
    163

    Today I auto scanned the car to see if I managed...

    Today I auto scanned the car to see if I managed to solve a problem but somehow the codes relating to the driver door appeared and the codes did mentioned about the folding mirror.
    The codes are as...
  13. So I've checked the followings 1. the fuse for...

    So I've checked the followings
    1. the fuse for the headlight range control J431 and it is good (fuse 8 in fuseholder C passenger side)
    2. the fuse for the onboard camera which is also ok (fuse 11...
  14. Replies
    4
    Views
    163

    Faulty driver side mirror

    Hello, I have this faulty driver side mirror. It won't fold in even if I use the button on the door. The passenger side works fine. The funny part is this malfunction did not appear in the VCDS auto...
  15. Hi Gremling, I've checked and my options didn't...

    Hi Gremling,
    I've checked and my options didn't include 8Q3. I found the list in the spare tire compartment. But I noticed my car has AFS13 stated in address 55 along with EV_AdvanFrontSyste, if...
  16. Noted. Thank you.

    Noted. Thank you.
  17. Hi Don, no changes was made on the 29th Nov @...

    Hi Don, no changes was made on the 29th Nov @ 5.30pm. The only change I've made was on 27th Nov when I changed the battery serial number because I've replaced the battery. And this headlight range...
  18. Uwe, up until now, I don't even realize that I...

    Uwe, up until now, I don't even realize that I have an onboard camera in my car, especially since I don't have this lane departure warning system or any system that uses an onboard camera. Not to my...
  19. Headlight Range (J431), Can someone decipher these codes for me?

    Hi I got these codes which won't go away and the adaptive light in the dashboard is always on.

    The two codes relating to this headlight range fall under 2 addresses:

    1. Address 09: Cent. Elect....
  20. Replies
    7
    Views
    346

    Update. Finally got some spare time. I've checked...

    Update. Finally got some spare time. I've checked the socket and wiring for the CMP sensor Bank 2 (C163) and found it is ok. So I've decided to replaced the C163. After replacing the sensor the car...
  21. Replies
    7
    Views
    346

    Yes. Lets hope that is not the problem. Once I'm...

    Yes. Lets hope that is not the problem. Once I'm free I think I should start checking the CMP sensor and its wiring for Bank 2. This is as recommended by the instant of the P code. I'll start with...
  22. Adaptive Light malfunction indicator is on

    My Adaptive Light malfunction indicator is on and after running the VCDS I got these two related (I supposed) fault codes:

    1. One under address 09 Cent. Elect.:
    1 Fault Found:
    01771 - Control...
  23. Replies
    7
    Views
    346

    Here is the full scan: ...

    Here is the full scan:

    Thursday,07,November,2019,11:05:28:34670
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
    VCDS Version: 19.6.2.0 (x64) HEX-V2 CB: 0.4508.4
    Data version:...
  24. Replies
    7
    Views
    346

    I don’t think there is any rattling but I noticed...

    I don’t think there is any rattling but I noticed subtle vibration now and then when idling. Once a while I have problem starting. I’ll put up the full scan once Im home. Thank you.
  25. Replies
    7
    Views
    346

    2011 A6 C7 with issues

    Hello there,

    ran my just acquired vcds on my A6 C7 a few times and on the last scan after clearing the faults code a few times I've got the following remaining faults codes:


    Address 01:...
Results 1 to 25 of 28
Page 1 of 2 1 2