Search:

Type: Posts; User: grant@gendan

Page 1 of 13 1 2 3 4

Search: Search took 0.02 seconds.

  1. From your post, it sounds like you may have...

    From your post, it sounds like you may have already seen the Ross-Tech Wiki page on this but here is the link for reference:...
  2. Are you seeing sensible live values for Fuel...

    Are you seeing sensible live values for Fuel Pressure in Measuring Blocks?
    If you click the Advanced Measuring Values button, it should show a list of live data offered and hopefully you can find...
  3. I don't think you need the SKC for this...

    I don't think you need the SKC for this procedure. You will most likely need the 'Security Access - 16' code for the Engine to perform an adaptation.

    Some examples are shown in this post:...
  4. Thread: Upgrade

    by grant@gendan
    Replies
    3
    Views
    283

    Hi Ivor bigun, Upgrades in the UK tend to only...

    Hi Ivor bigun,

    Upgrades in the UK tend to only be available on the new Unlimited VIN interfaces. If you are looking to just cover 2 cars, then the 3-VIN HEX-V2 is your best option (approx 225)....
  5. Replies
    2
    Views
    165

    Please can a moderator correct the thread title?...

    Please can a moderator correct the thread title? I posted too hastily and now can't correct the title to the required format.
    Thank you.
  6. Replies
    2
    Views
    165

    VW Crafter 2019 DASB

    Thursday,06,June,2019,22:54:26:40661
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 8 x64
    VCDS Version: 19.6.0.2 (x64) HEX-V2 CB: 0.4505.4
    Data version: 20190529 DS308.0...
  7. Replies
    2
    Views
    107

    Hi Morris, When you have your VCDS interface...

    Hi Morris,

    When you have your VCDS interface with you, you can follow the instructions on this thread to register and get verified:...
  8. Thread: VW golf

    by grant@gendan
    Replies
    12
    Views
    408

    I have seen some of the modules and connectors...

    I have seen some of the modules and connectors corrode inside the door.
    I saw an example last week where water had collected in the connector to the control module inside the drivers door. It had...
  9. Thread: VW golf

    by grant@gendan
    Replies
    12
    Views
    408

    Hi, The CAN Gateway cannot talk to either Rear...

    Hi,

    The CAN Gateway cannot talk to either Rear Door control modules.
    Have you changed any wiring or modules on this car?

    The car is also looking for a Parking Brake control module, which is...
  10. Replies
    4
    Views
    390

    Location 'britian' :confused:

    Location 'britian' :confused:
  11. Replies
    5
    Views
    483

    Hi, From your scan, I would say the EGR valve...

    Hi,

    From your scan, I would say the EGR valve is still present and faulty. It may be that the car has been flashed to not use the EGR value but it is still physically fitted to the car and looks...
  12. This function test can be tricky to complete....

    This function test can be tricky to complete.
    Follow the instructions in the video carefully and it should work:
    https://www.youtube.com/watch?v=7AVPRj2BNuc
  13. This video from Ross-Tech may help:...

    This video from Ross-Tech may help:
    https://youtu.be/rcDXC9GtdPE
  14. Can't comment on your VW model specifically,...

    Can't comment on your VW model specifically, however...
    If I remember correctly, on 4WD Audi A6 4F 2009+ models there is not an option to enable Indirect TPMS without installing a control module and...
  15. Replies
    4
    Views
    774

    VCDS should allow you to match the Keyfob Remote...

    VCDS should allow you to match the Keyfob Remote signals to the car - for central locking buttons on the remote.

    As Uwe described, to match the key to the immobiliser (to allow the Engine to...
  16. Hi Dana, Thanks for your reply and...

    Hi Dana,

    Thanks for your reply and suggestions. I have just been messaged to say the test has completed and all warning lights have extinguished.

    After leaving the car for a while (and finding...
  17. 2014 VW Caddy - ESP Function Test Activated

    Hi all,

    A colleague called in today with a 2014 VW Caddy. They had been trying to recalibrate the G85 Steering Angle Sensor after a geometry adjustment but had started the ESP Function Test by...
  18. Replies
    6
    Views
    495

    The 6N2 Polo with the AUA engine uses an NTK...

    The 6N2 Polo with the AUA engine uses an NTK brand OE Sensor. There are lots of copies of this sensor around which don't work. Did you fit a genuine NTK branded sensor?
  19. Hi Clive, With the Engine Running, what...

    Hi Clive,

    With the Engine Running, what pressure values are you seeing in MVB 102:

    102,1,Temperature prior,Precatalytic Converter 29.5C
    102,3,Particle Filter,Different. Pressure ...
  20. That has me confused too. The Engine shows up in...

    That has me confused too. The Engine shows up in an AutoScan but we cannot get into it under 'Select'. Whichever option we pick gives a 'No response from Controller' error message. Other modules work...
  21. Hi Dana, Please find below an AutoScan from...

    Hi Dana,

    Please find below an AutoScan from the Crafter.

    We are still unable to clear the Inspection warning. It now says 'Inspection in -40 days'.

    In addition, we cannot access the Engine....
  22. Hi all, I have a question on a 2017 LT3. The...

    Hi all,

    I have a question on a 2017 LT3. The controller map, part numbers etc are identical to those posted above by Yupster.

    We have tried writing '0' to 'LR303066-WIV Reset (VW) Write' -...
  23. Hmm. If the wiring to this control unit is ok,...

    Hmm. If the wiring to this control unit is ok, then it looks like the control module has failed.

    I think this is part of the steering rack (please correct me if this is wrong), so probably...
  24. Replies
    3
    Views
    1,530

    There are loads of support resources available...

    There are loads of support resources available online for VCDS users.
    Once you have a VCDS scan from the car showing your fault codes, you can ask for help on Ross-Tech's forum or on other forums...
  25. Hi all, Was a solution found to this problem?...

    Hi all,

    Was a solution found to this problem? I have been asked if it is possible to remove the Speed Limiter on a 2011 Caddy 1.6TDi using VCDS.

    Thanks.
Results 1 to 25 of 304
Page 1 of 13 1 2 3 4