Search:

Type: Posts; User: Mrclopec

Page 1 of 9 1 2 3 4

Search: Search took 0.03 seconds.

  1. Private Message Sent

    Private Message Sent
  2. Sometimes the VCDS labels can be somewhat...

    Sometimes the VCDS labels can be somewhat misleading/vague. Just because a box says AFS, doesn't mean its supposed to be checked. Do not enable Byte 9 bit 5.

    Per your last autoscan on May 27, your...
  3. Here is a comparison of my coding to your May 27...

    Here is a comparison of my coding to your May 27 post:
  4. :facepalm: You must have missed this bit of...

    :facepalm: You must have missed this bit of advice in your duplicate thread...
  5. The front level sensor is REQUIRED. The...

    The front level sensor is REQUIRED.
    The headlights do not do the left/right dance like a VW. They will only dip and go back up so thats normal.
    The power output modules are not directly coded. They...
  6. Replies
    5
    Views
    1,518

    Module 44. Coding. Enable byte 2 bit 0. Coding...

    Module 44. Coding. Enable byte 2 bit 0. Coding for the module should end up being 100001000001. Clear DTC's.
  7. Replies
    9
    Views
    2,859

    I have never done this retrofit. I was just...

    I have never done this retrofit. I was just offering ideas, per your request, based on information you had already provided.
  8. Replies
    9
    Views
    2,859

    Yes. It is a big deal. For the MY13 A6 Allroad...

    Yes. It is a big deal. For the MY13 A6 Allroad Quattro, the "M" is the right part. Go back and check your part numbers. It just might explain your "Incorrect Version Installed" error on your 44...
  9. Replies
    9
    Views
    2,859

    Your 1B module is for MY15+ A6/Avant.

    Your 1B module is for MY15+ A6/Avant.
  10. Replies
    7
    Views
    4,850

    Please read the above posts. FL = Active Lane...

    Please read the above posts. FL = Active Lane Assist (steering rack) VFL = Lane Assist (Steering wheel vibration only by vibration motor in the actual steering wheel).
  11. Replies
    18
    Views
    6,536

    Can we see the new one so we know what remains?

    Can we see the new one so we know what remains?
  12. Replies
    9
    Views
    3,573

    Agreed. Try to do your coding with ignition...

    Agreed. Try to do your coding with ignition on/engine off.
  13. Even if they aren't you may still be in luck. I...

    Even if they aren't you may still be in luck. I retrofitted autodimming mirror to my 2011 TT which the controllers didn't support. The controller just acted as a means for passthrough and just needed...
  14. Thread: Seat memory

    by Mrclopec
    Replies
    4
    Views
    2,084

    It's a safety feature. I do believe if you press...

    It's a safety feature. I do believe if you press the button while the door is still open, it will move everything automatically, but once you shut the door, you have to press and hold. It's so you...
  15. I don't know what to tell you about the rear sun...

    I don't know what to tell you about the rear sun shade as I have not done that job. As far as the BCM module, ours support front PDC (hardware wise). But the software or parameters are just absent...
  16. VCP. There are a couple of retailers online that...

    VCP. There are a couple of retailers online that will ship to the US. Don't wanna go promoting another product here in the Ross-Tech forums tho. The VCDS cable is EXTREMELY useful and will always be...
  17. So just to follow up with anyone who was...

    So just to follow up with anyone who was interested. Got ahold of another tool and did go in and re-paramaterized BCM1 to support 8ch PDC. Took all of about 45 seconds and the sensors fired up right...
  18. Replies
    23
    Views
    14,953

    I thought all you had to do was: 1. Mirror...

    I thought all you had to do was:

    1. Mirror selector switch to right mirror.
    2. Place foot on brake, shift to reverse.
    3. Use mirror adjuster to put mirror into desired tilt position.
    4. Shift...
  19. Are you saying you wish to add the adaptive...

    Are you saying you wish to add the adaptive cruise to your drive select menu? Or you want to remove it. I'm confused on what you are trying to accomplish. If you're trying to add it, 09 Central...
  20. Not trying to stir anything up other than merely...

    Not trying to stir anything up other than merely reflecting on the peculiar reality that two otherwise identical control modules without any indication visually, or through software identification...
  21. Oh come now Uwe... :cool:

    Oh come now Uwe... :cool:
  22. Im gonna bump this... Someone at RT has to...

    Im gonna bump this...

    Someone at RT has to know the answer to this one...

    Two vehicles. '15 Q5 and '14 S4. Both have the same BCM. Same software and hardware part numbers. Both have the same...
  23. This one. ...

    This one.



    Sunday,05,February,2017,00:09:40:00104
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x86(Parallels)
    VCDS Version 17.1.2.1
    Data version: 20170131 DS267.1...
  24. Well, so far I have found the following...

    Well, so far I have found the following information (Ross-Tech please take note for future clb updates):

    00x09-10-229 Rear Parking Sensor Volume
    00x09-10-230 Rear Parking Sensor Frequency...
  25. What exactly is VCP being used to do? Component...

    What exactly is VCP being used to do? Component protection? Flash? Zdc upload?

    Do you have an A4/S4 with factory fitted front and rear you can post an adaptation map of?
Results 1 to 25 of 201
Page 1 of 9 1 2 3 4