Search:

Type: Posts; User: Treborg

Search: Search took 0.01 seconds.

  1. I note the "12 V" level is at 11.0 V, which seems...

    I note the "12 V" level is at 11.0 V, which seems too low. Was the engine on?

    I'm getting the 03041 code on my 2013 Q5 Hybrid, particularly when I scan with the engine off for a while (like...
  2. Epilog: I went back in with VCDS today (after...

    Epilog: I went back in with VCDS today (after having to wipe and reload my Win 7 laptop, what a pain), and saw the following regardless of engine on or off (see scan below):

    I rechecked the...
  3. 2013 Q5 Adaptation to turn on stationary turning lights

    Im trying to troubleshoot a problem with my stationary turning lights, and Id like to turn them on via VCDS. Ive looked and cant find a way to do it.

    Anyone know how?

    Thanks!
  4. The stationary cornering lights on both sides do...

    The stationary cornering lights on both sides do not work. I tested this evening after dark with someone watching as I turned both right and left onto a road. I recall that the lights come on after...
  5. 2013 Audi Q5 Hybrid Left Cornering Light Error

    I saw an "Audi Adaptive Light Defective" on the dash Tuesday, and I ran VCDS & saw that the M51 bulb for the Stationary Cornering Lamp was open-circuit. I bought a new H7 bulb and with some hassle...
  6. Replies
    4
    Views
    1,037

    I've been searching thru my copy of the shop...

    I've been searching thru my copy of the shop manual, and it is the lower solenoid valve N82 that is the culprit for P2681. Damn thing is virtually impossible to see from the top - one can see the...
  7. Replies
    4
    Views
    1,037

    I just had the same (P2681) code on my Q5 Hybrid....

    I just had the same (P2681) code on my Q5 Hybrid. Did your solenoid change fix the problem?
  8. Replies
    7
    Views
    717

    This is what the 2013 Audi Q5 Hybrid service...

    This is what the 2013 Audi Q5 Hybrid service manual says:

    System fault in Tyre Pressure Loss Indicator (TPLI+):

    If the warning lamp flashes for about 1 minute after switching on the ignition...
  9. Replies
    7
    Views
    717

    In the center display between the gauges, the...

    In the center display between the gauges, the word TPMS appears at the top of the display with a red background. This is usually where major system fault messages appear, like HYBRID. An alarm...
  10. Replies
    7
    Views
    717

    Here is an autoscan from yesterday while the TPMS...

    Here is an autoscan from yesterday while the TPMS error was being displayed on the instrument cluster:


    Thursday,29,November,2018,18:21:11:47760
    VCDS -- Windows Based VAG/VAS Emulator Running on...
  11. Replies
    7
    Views
    717

    No TPMS module response on VCDS

    2013 Audi Q5 Hybrid, 45 K miles, VCDS 18.9.0

    I'm getting an intermittent TPMS fault on the instrument cluster (not a low-tire pressure message). When I try scanning the vehicle, I've discovered...
  12. Replies
    1
    Views
    661

    2013 Q5 MMI Nav troubleshooting

    I can't figure out how to identify the module associated with the MMI and/or Navigation functions. I'm trying to troubleshoot a potential GPS antenna problem.

    The modules with the name...
Results 1 to 12 of 12