Search:

Type: Posts; User: Jef

Page 1 of 20 1 2 3 4

Search: Search took 0.08 seconds.

  1. Every car sold since maybe 2008 or 2009 should...

    Every car sold since maybe 2008 or 2009 should have at least 1 paperless report (like an auto-scan, but with a lot of trash tossed in) from when the PDI was done. There should be a paperless report...
  2. Then I think you still have a wrong J527 part...

    Then I think you still have a wrong J527 part number

    5980040000 coding breaks down as follows:

    Byte 0 : 59

    Bit 0 = G85
    Bit 3 = Auto trans but no kessy
    Bit 4 = rear wiper
    Bit 6 = trip...
  3. Replies
    4
    Views
    148

    Info on where to purchase wiring diagram info...

    Info on where to purchase wiring diagram info here:

    http://wiki.ross-tech.com/wiki/index.php/Official_Factory_Repair_Information
  4. Replies
    3
    Views
    100

    While I don't think this will be a coding issue,...

    While I don't think this will be a coding issue, lets be sure it is actually back to the original coding value...

    Codinglog.CSV

    And of course any time you run Auto-Scan, VCDS automagically...
  5. Coding looks good to me for both TCM and J527. ...

    Coding looks good to me for both TCM and J527. This seems to be a bit of a "base" model vehicle.

    Using PL24 to look up the J527 part number... it doesn't give a part number, it states to use a...
  6. Replies
    4
    Views
    148

    We all know what I'm going to post.... :rolleyes:...

    We all know what I'm going to post.... :rolleyes:

    For any given control module to communicate, it must have THE HOLY TRINITY!
    https://i.imgur.com/G8YGwbm.jpg

    Looks like SA20 and SB31 are the...
  7. Thread: AC fault codes

    by Jef
    Replies
    7
    Views
    157

    The G65 is the High Pressure Sensor. It has 3...

    The G65 is the High Pressure Sensor. It has 3 wires:


    /1 = br, ground
    /2 = li/ge, to HVAC (J255) T20c/2
    /3 = bl/sw from fuse SC13 (5A)


    Unplug the sensor, make sure the electrical...
  8. Replies
    1
    Views
    51

    Vehicle support, moved to proper location so more...

    Vehicle support, moved to proper location so more eyes can get on it. Please provide a FULL Auto-Scan!

    If the top is fully closed and locked up, or fully open and secured, what do all the...
  9. Thread: AC fault codes

    by Jef
    Replies
    7
    Views
    157

    Please post the FULL Auto-Scan!...

    Please post the FULL Auto-Scan!
  10. Replies
    1
    Views
    85

    Thank you for posting a full Auto-Scan! :thumbs:...

    Thank you for posting a full Auto-Scan! :thumbs:

    As per the VIN, ABS coding looks like it would be 0013581. EPB soft coding would be 0000011.


    However, the 02433 fault code in the EPB module...
  11. Replies
    12
    Views
    388

    So you tried the Basic Setting steps?

    So you tried the Basic Setting steps?
  12. Replies
    3
    Views
    185

    Connect to the Instrument Cluster, go into...

    Connect to the Instrument Cluster, go into Adaptation and read channel 60. What is the stored value?
  13. Replies
    18
    Views
    5,491

    ST?ID=92867 No comm with car. Using a...

    ST?ID=92867

    No comm with car. Using a HEX-USB+CAN (HEX+CAN), port test comes up as not plugged up to car. Is the LED on the HEX+CAN powered up? Nope. Plug up to any other car, does the LED...
  14. Replies
    18
    Views
    5,491

    ST?ID=92832 2008 R32 ...

    ST?ID=92832

    2008 R32

    P0491 001169 VCDS-EN-190211 Secondary Air Injection System: Bank 1: Insufficient Flow
    P0492 001170 VCDS-EN-190211 Secondary Air Injection System: Bank 2: Insufficient Flow...
  15. Replies
    25
    Views
    760

    I would avoid using a scan tool to bleed or flush...

    I would avoid using a scan tool to bleed or flush the brakes. Pressure bleeding is the way to go. Early on at my VW dealer days, I was involved several times with trying to use the scan tool to...
  16. Replies
    5
    Views
    239

    ABS coding will be 0013755. EPB module coding is...

    ABS coding will be 0013755.
    EPB module coding is 0000013

    Go to this wiki page:
    http://wiki.ross-tech.com/wiki/index.php/VW_Passat_(3C)_Parking_Brake

    Work your way through the items listed...
  17. Thread: Linde forklift

    by Jef
    Replies
    4
    Views
    224

    MVB group 241 should be: field 1 = Particle...

    MVB group 241 should be:


    field 1 = Particle Filter,Oil Ash Volume,Range: -380...+380 ml
    field 2 = Soot Load(g),Calculated
    field 3 = Soot Load(g),Measured
  18. Going to hold judgement on anything until we know...

    Going to hold judgement on anything until we know compression numbers and the results of coil/plug juggling.

    A lot of "Intermittent" codes, do they come back if cleared out? Note the one in the...
  19. Thread: Linde forklift

    by Jef
    Replies
    4
    Views
    224

    DPF regen? Hmmmmm.... You can try Security Access...

    DPF regen? Hmmmmm.... You can try Security Access 27971 to enable Basic Settings and then Basic Settings group number 226 for regeneration while standing. This is an educated guess.

    I'd be a bit...
  20. Before you clear fault codes, what is the data in...

    Before you clear fault codes, what is the data in 01-08-032 and 11-08-032?

    To expand on what Jack asked about the MAF, please read over this article about Fuel Trim Info. Really take in the part...
  21. Replies
    25
    Views
    760

    Will point out, odds are once you hit about...

    Will point out, odds are once you hit about 20km/h, the ABS module will drop communication.... don't panic, ABS modules do this by design.
  22. Replies
    4
    Views
    275

    VCDS automatically saves Auto-Scans. If an...

    VCDS automatically saves Auto-Scans. If an Auto-Scan was performed prior to the soft coding being lost, you can retrieve that information. Details here.
  23. Replies
    25
    Views
    760

    Are all 4 tires 100% matching? Same size? ...

    Are all 4 tires 100% matching? Same size? Brand? Tread depth? Does it not reset after holding in the TPMS button in the glove box?
  24. [insert Stewie hitting kid with baseball bat then...

    [insert Stewie hitting kid with baseball bat then saying "what did you learn?" meme here]

    Ouch. Well I don't have good news to offer, that type of ABS coding is.... crazy complex.

    I would...
  25. Replies
    3,405
    Views
    1,152,424

    I'm fixing up the cabinet on one of my pins. One...

    I'm fixing up the cabinet on one of my pins. One of the screws for some of the hardware was stripped out. After doing battle to the death and winning... I present the screw as it was removed:
    ...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4