Search:

Type: Posts; User: Dana

Page 1 of 20 1 2 3 4

Search: Search took 0.11 seconds.

  1. I realize you only tweaked a few bits specific to...

    I realize you only tweaked a few bits specific to the MFSW but does that new BCM function properly when you put your entire factory (original) condition coding in it?

    Also, have you swapped the...
  2. N227 is part of N55 (providing diagram # 46/4 is...

    N227 is part of N55 (providing diagram # 46/4 is correct) so I believe the alignment was unrelated.
  3. Replies
    9
    Views
    119

    Resolving the cause of those electrical DTCs...

    Resolving the cause of those electrical DTCs would be best so you don't end up with lost 03-ABS coding again.

    I believe this GLI was born with 1K0 907 379 CB which supers to 1K0 907 375 CC. The...
  4. Replies
    2
    Views
    85

    Providing the diagnostic VIN matches the car, I...

    Providing the diagnostic VIN matches the car, I believe WVWZZZ13Z9V027187 was factory coded to:

    763B40F5092400016E0C02EC902000823000

    The replacement steps on this page apply:...
  5. Replies
    10
    Views
    198

    I agree with Jack on the incorrect part number. ...

    I agree with Jack on the incorrect part number. In addition to the part number, it also uses a different coding length.

    We have a good baseline scan from a similar Touran so we should be able to...
  6. Replies
    33
    Views
    882

    That sounds like it may be progress. Assuming it...

    I wrote those codes but 10533 gave me the least fault codes. I order the abs but the scrapyard saw that it isn't from factory so they shipoed another one so i will get the right one next...
  7. We're still limping by after the incident...

    We're still limping by after the incident so I don't have access to much info however my relatively low-spec Golf Alltrack has a factory fitted flappy paddle MK7 wheel with a GW MQB Mid 19 module. ...
  8. Replies
    3
    Views
    125

    I can't confirm or deny this is possible either...

    I can't confirm or deny this is possible either but I checked our VW EPB Generation 3 and EPB Generation 4 files and we don't have anything like that documented for CAN controllers.


    Some of the...
  9. Replies
    33
    Views
    882

    P.S. We have notes on an entirely different car...

    P.S. We have notes on an entirely different car type in our coding chart that may apply. For example:


    78 = MY 2009: 2.0l TFSI CCTA [PR-TQ2] & 6-Speed Automatic [PR-G1A]
    but
    79 = MY 2009:...
  10. Replies
    33
    Views
    882

    Sounds good. When it arrives I would plug it in...

    Sounds good. When it arrives I would plug it in and see if 0010538, 0026922 or the original coding of 0002346 are accepted. If it accepts several of those coding values it should be worthwhile to...
  11. Replies
    12
    Views
    507

    The main office is down (Crash...

    The main office is down (Crash outside that wiped out a pole containing internet and left a live power line in the street) but we can get you fixed up with a redirect -or- the native German files. ...
  12. Replies
    33
    Views
    882

    Hi guys, I don't have much to contribute but...

    Hi guys,

    I don't have much to contribute but I came up with the same 03-ABS coding values:

    Original 8T2 = 092A | 0002346
    PR-8T5 CCS = 292A | 0010538
    PR-8T3 CCS = 692A | 0026922

    We don't...
  13. Thanks guys! I added those to ...

    Thanks guys! I added those to 5Q0-907-379-IPB-V1.lbl and noted Don's chart in post #1:

    https://forums.ross-tech.com/showthread.php?19270-MQB-platform-Security-Codes-work-in-progress

    We can...
  14. Hi Don, I changed the title from MQB platform -...

    Hi Don, I changed the title from MQB platform - Security Codes (SA) - work in progress -to- MQB platform - Security Codes - work in progress because our fancy forum acronym addon was breaking links...
  15. Hi Carlos, I agree with NEtech. Based on the...

    Hi Carlos,

    I agree with NEtech. Based on the Fault Frequency: 16 I think it is entirely possible that a preexisting problem was present and the lost coding, followed by coding, may have forced...
  16. Thanks Magnus, We received the files. Hopefully...

    Thanks Magnus, We received the files. Hopefully they shed light on this concern!
  17. Replies
    62
    Views
    54,935

    I don't believe it will be of much assistance but...

    I don't believe it will be of much assistance but we've had a handful of individuals report TRW_G4L_MQBA0 modules accept SA code 19249. For instance:
    ...
  18. Replies
    5
    Views
    200

    Please do run a complete scan and post it here. ...

    Please do run a complete scan and post it here. That will help us verify the part numbers of the installed modules and determine what's necessary to get you registered/verified.

    Honestly, I don't...
  19. Replies
    62
    Views
    54,935

    Hello ConD, We do not have a TRW_G4L_MQBA0...

    Hello ConD,

    We do not have a TRW_G4L_MQBA0 procedure to offer but there may be an update in this thread moving forward: ...
  20. Hello Egon, If you still have access to both...

    Hello Egon,

    If you still have access to both interfaces please try the following:

    HEX-USB+CAN or similar Legacy Interface (good baseline info):

    [Options]
    Change the Debug level from 0 to...
  21. Replies
    5
    Views
    200

    A.J. Congratulations on the Etron purchase. ...

    A.J. Congratulations on the Etron purchase.

    As Dave mentioned, we would need to see a complete VCDS scan from this vehicle but if you don't already own VCDS we do not want to see you purchase...
  22. Hi Carlos. Dave and I are driving at the same...

    Hi Carlos. Dave and I are driving at the same thing in regards to those rear WSS part numbers. According to PL24 by VIN the vehicle should have had:

    Left rear: WHT 003 859 A which supers to WHT...
  23. I don't think you are doing anything wrong...

    I don't think you are doing anything wrong procedure-wise Carlos. This is not normal:

    04-Steering Angle -- Status: Cannot be reached 1100

    The steering angle is inside the slip ring which is...
  24. Replies
    12
    Views
    335

    Hi Earl, OK as long as the VIN is correct,...

    Hi Earl,

    OK as long as the VIN is correct, that confirms 1K0-907-379-AM was factory installed coded to: 114B600CC9290003881306EC931A0041B108


    The used module is likely rejecting the factory...
  25. Replies
    12
    Views
    335

    Hi Earl, This VIN decrypts to a 2010 MY...

    Hi Earl,

    This VIN decrypts to a 2010 MY (rather than 2015). I can easily change the title of the thread however the VIN is encrypted into MK60EC1 ABS coding so please verify WVWHV7AJ7AW079881...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4