Search:

Type: Posts; User: downtime

Page 1 of 20 1 2 3 4

Search: Search took 0.07 seconds.

  1. IT WORKS! I don't know what was the thing that...

    IT WORKS! I don't know what was the thing that made it work. I made a jumper CAN cable and attached the CAN to infotainment CAN instead of running gear. Bingo, unit responded immediately. Then I...
  2. I give up with this module. I've tried basically...

    I give up with this module. I've tried basically everything and the module just does not want to communicate. So I have to believe that the area view module itself is busted. There's no other...
  3. Hahaha... I will take some. I don't have any...

    Hahaha... I will take some. I don't have any pictures from the installation. Only from the door connectors. I'll take pictures of the finished product when I get this one working. I promise :)
  4. �� I wish I’ve had done the same��

    �� I wish I’ve had done the same��
  5. All components installed and wired, but I cannot...

    All components installed and wired, but I cannot connect to area view unit. Measured that there is power and ground to the area view connector block. CAN should be fine as well. I'm suspecting...
  6. Replies
    28
    Views
    579

    I’ve seen some of these specialist selling...

    I’ve seen some of these specialist selling developer keys. If you have bad luck and you get blacklisted key, your car VIN might get banned from mothership server which means no CP nor IMMO jobs for...
  7. Replies
    28
    Views
    579

    Enough if you calibrate it at normal room...

    Enough if you calibrate it at normal room lighting. They don’t calibrate that for both in workshop either.

    You can get the VAS boards printed from Aliexpress as well. The front camera cal board...
  8. Ok new door connectors fitted to passenger side....

    Ok new door connectors fitted to passenger side. However, not much use if the aliexpress wiring set needs crimping the pins and using standard VAG connectors.

    The OEM door connector housings have...
  9. Replies
    6
    Views
    115

    Is there a need for security access login first...

    Is there a need for security access login first before running the vehicle data learning procedure?
  10. Replies
    6
    Views
    115

    Edit, no dealer needed, for the error below check...

    Edit, no dealer needed, for the error below check this one:
    http://wiki.ross-tech.com/wiki/index.php/01794

    I think you need to fix this first to get any coding in.
    '


    01794 - Control Module...
  11. Yes, newer cars have 4B multifunction module that...

    Yes, newer cars have 4B multifunction module that controls the lights. I have 2017 Tiguan which still has 55. Both work and according to some here, 55 is easier to retrofit and code than 4B. And yes,...
  12. Also module 55 headlight range is not visible so...

    Also module 55 headlight range is not visible so it's not communicating. Either no power supply, ground or can wires not connected.
  13. Replies
    21
    Views
    795

    Software does not help you. You need online...

    Software does not help you. You need online access to VW servers to be able to adapt the ECU and immobilizer. So a dealer job.
  14. Ok. I would start by fixing the gateway...

    Ok. I would start by fixing the gateway installation list. Remove 37 navigation, 56 radio and add 5F multimedia unit. See if that makes the situation any better.
    Clear all DTCs. Run a fresh autoscan...
  15. Replies
    6
    Views
    132

    Dealer job to remove CP. What comes to...

    Dealer job to remove CP.

    What comes to original ACC module. Faulty module?
  16. What kind of wiring harness you have?

    What kind of wiring harness you have?
  17. I agree :) even when you use part number...

    I agree :) even when you use part number directly, it finds nothing. Then you search for a connector as an example, it suddenly shows you the parts you were looking for.
  18. Of course. These are the ones I bought :...

    Of course. These are the ones I bought : https://www.aliexpress.com/item/4000921370644.html?spm=a2g0s.9042311.0.0.585e4c4dIDWDyw

    I will pimp them a little bit and add metal rods at the ends to the...
  19. 130€ for the area view wiring. I already have...

    130€ for the area view wiring.

    I already have blind spot (aka side assist) and Dynaudio in the car so I just need wiring for the area view.

    Only real concern is the front camera wiring. I do...
  20. Well, ordered the new door connectors to doors...

    Well, ordered the new door connectors to doors and to car frame. Were only 9€ per connector so not that expensive.

    At least it will be fully oem.

    Now just waiting for the wiring from China. Got...
  21. Replies
    20
    Views
    2,072

    Not necessarily during coding but to get the...

    Not necessarily during coding but to get the coding key, then for sure.

    There are some nice videos which explain the SPD quite good. When we now insert a pre defined key to some modules when doing...
  22. Replies
    26
    Views
    8,150

    Yes, it supports emergency braking but not...

    Yes, it supports emergency braking but not pedestrian protection.
  23. Replies
    20
    Views
    2,072

    I agree with golfi_vend. Convenience is what make...

    I agree with golfi_vend. Convenience is what make kessy so great.

    I’m now again having a car with conventional key and I hate it. I got so used to kessy with my previous car that, well, i just...
  24. Replies
    26
    Views
    8,150

    Ok understood :)

    Ok understood :)
  25. Yep, that is my plan. Wiring and crimping new...

    Yep, that is my plan. Wiring and crimping new connectors is no issue :)
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4