Only thing I'm spotting, is that your VCDS is quite old. How about you update it to current release, then do auto-scan and post the results here to start with. :cool:
Type: Posts; User: Mika_M
Only thing I'm spotting, is that your VCDS is quite old. How about you update it to current release, then do auto-scan and post the results here to start with. :cool:
No, they are not. That is just the gateway installation list. Please post the FULL auto-scan so that others can see what's really going on with your car...
I am not really sure what you have tried. What I suggested, was to follow those instructions that Dana wrote in that old post. First cycle handbrake on and off while pressing brake pedal, then go for...
It was connected according to DIN 72552. 15 is 12 volts when ignition on, 31 is ground and 53 goes to wiper motor. That leaves L, which must then be connected to wiper switch.
This procedure might help: https://forums.ross-tech.com/showthread.php?7312-Basic-setting&p=104517&viewfull=1#post104517
At least worth trying.
I'm fairly confident that this procedure works for 2016 Golf R: http://wiki.ross-tech.com/wiki/index.php/VW_Golf_VII_(5G/AU)_ABS_Brakes
As for the CC, maybe post the auto-scan so we can see how...
Check this: https://forums.ross-tech.com/showthread.php?5999-Where-do-I-get-a-Wiring-Diagram
And then of course this:...
Well that's a disappointment. :( Thanks for the info anyway, no need to dig deeper then.
My Kodiaq has three keys and three different driver profiles attached to those keys. This is nice, since almost every setting is connected to profiles, no need to do manual adjustments to mirrors,...
I would recommend some kind of splash screen when VCDS detects that user is accessing UDS module for the first time, to inform that "Measuring blocks are not available in this module, don't panic and...
First thing to do, would be to post a full auto-scan from the car in question.
Second thing to do, would be to go in front of the nearest mirror, look at it and ask "Why did you ignore the...
The best source: https://erwin.audi.com/erwin/showHome.do
Buy access for 1 hour and download all the repair manuals, wiring diagrams etc for you car.
Yes, but what about those sections I circled red in post #2 ? They don't support that conclusion...
Even that should not make any difference, since Yes should mean "Maybe mixed in any ratio without issues". :confused:
I'm having trouble understanding this chart, probably it's just my stupidity interfering. How is it OK or not recommended to mix some coolants, depending on how you read the chart? Green is OK but...
It's perfectly normal. Nowadays that module 09 stores it's setup in adaptation channels. Coding is still there but it is all zeroes and that's how it's supposed to be.
Ah, that slave module is rear door window motor... Rear door control modules should appear in installation list at address BB and BC. Too bad. :cry:
I started to investigate how hard would it be to retrofit electronically operated rear door child safety locks to Kodiaq. Car has almost every other option installed from factory, but these are...
SSP 424 states that there is indeed a level sensor G697 in AdBlue tank. But you are right, it is not a float type sensor. There are only four electrodes of different length, one of which is the...
Went to dealer today to get few things fixed (air quality sensor, blind spot detection dropping when engaging reverse etc). They told me not to worry about the wheel temp sensor error. It exists in...
291104 - Temperature Sensor for Heated Steering Wheel
B1455 01 [008] - Electrical Failure
Intermittent - Confirmed - Tested Since Memory Clear
Any information or clues about...
Tuesday,20,August,2019,20:08:15:26429
VCDS -- Windows Based VAG/VAS Emulator Running on Windows XP x86
VCDS Version: 19.6.0.2 HEX-V2 CB: 0.4505.4
Data version: 20190529 DS308.0
www.Ross-Tech.com...
N422 and N82 seem to reference the same valve: "Certain vehicles without an auxiliary heater (optional equipment) were fitted with vacuum-actuated coolant shut-off valves from the start of production...
I would guess the answer is no and no.
Although, you CAN enable the mirror reverse function, but it will probably not work as it should since you do not have the electric seats with memory. I...
After battery replacement, did you also code the replacement in CAN gateway...? If not, your car still thinks it has the old battery and that may (or may not) cause many weird things.
...