I wasn't able to reproduce my results this morning either. Second image in each case.
Type: Posts; User: westerner
I wasn't able to reproduce my results this morning either. Second image in each case.
I was using a Lenovo Legion Y920 laptop. https://www.cnet.com/products/lenovo-legion-y920/specs/
I stumbled on a discovery. VCDS works better if it gets an assist from UltraGauge. If I first connect my UltraGauge and then yank it and connect VCDS/Hex-Net, the VCDS GUI makes more sense and its...
There's a hill in my neighborhood. If I attach my UltraGauge Blue and drive up and down the hill, the transmission temp gauge I defined moves gradually up and down by 2 degrees F. If I drive the same...
https://s3.amazonaws.com/docbucketjmb/vcds2.PNG
I tried that experiment today and got these useless results: https://s3.amazonaws.com/docbucketjmb/LOG-33-05-xx-xx-xx.CSV
Actually, I think the TCM temp is well in hand. As NETech points out in comment #8, one of the temps shown is from the transmission. I'm sure he's correct. One of the temps seen in the screenshot in...
Then you should put a "NO" in the 'Data Logging' row for the VCDS-Mobile column on this page: http://wiki.ross-tech.com/wiki/index.php/Functions
All the details I have previously given still apply. I see no change at all. It is still impossible to obtain a log of my transmission temperature. The log contains only one value, which is evidently...
I got pretty excited when I saw 'Fix for data logging' in the release notes. Now that I have done some testing, my excitement has waned.
I thought I would load up the Beta today and try logging again to see if any progress had been made. By the time I got to the grocery store, there were four temps showing on my phone. In the log,...
I tried logging again yesterday. This time there were three temperatures displayed on that page, one with no label at all:
https://s3.amazonaws.com/docbucketjmb/Screenshot_20180315-150838.png
The...
I tried logging from that page today. All I got was a log full of time stamps. No data. https://s3.amazonaws.com/docbucketjmb/LOG-5.csv In the log I have now, are those octal representations of...
When VCDS Mobile says 35C (assuming the first of the 10 values is the one we want)(which is equivalent to 95F) my scangauge II says 181F.
So I set up my Hex-Net to log transmission temperature and started a gps track recording at the same time and drove over a mountain pass. Transmission temp is pathological obsession of us Eurovan...