Search:

Type: Posts; User: TFSI

Page 1 of 9 1 2 3 4

Search: Search took 0.02 seconds.

  1. Thread: Will not shift

    by TFSI
    Replies
    4
    Views
    169

    I will do the same too...clean first :)

    I will do the same too...clean first :)
  2. Replies
    3
    Views
    117

    Welcome on board. Please post autoscan so you...

    Welcome on board.
    Please post autoscan so you can get some inputs from members.
  3. Replies
    8
    Views
    281

    Mike, When Jack writes FOD it means could be...

    Mike,
    When Jack writes FOD it means could be Foreign Object Damage related issue. Also just so you know, if you hoover the mouse over any of the abbreviation, you will see the full meanings.
    I hope...
  4. Replies
    1
    Views
    174

    Andsom- For this case, I would make sure battery...

    Andsom-
    For this case, I would make sure battery is fully charged and very ok. Which faults return after clearing them? Then with VCDS, I will take MVBs on Term. 15 and Term 50 relevant components...
  5. Replies
    16
    Views
    635

    Adaptation online means the dealer scanner will...

    Adaptation online means the dealer scanner will be used to connect to your car and through the IT system in the dealership connection between your car and the factory will be established to adapt...
  6. I think Jack meant check for Foreign Object Damage

    I think Jack meant check for Foreign Object Damage
  7. Thanks Jack, very informative and revealing.

    Thanks Jack, very informative and revealing.
  8. Wotseurba- To check if the pump is priming,...

    Wotseurba-
    To check if the pump is priming, there are few ways you could do that: either you disconnect the fuel supply line to engine and then turn ignition on-fuel should spill out of the hose...
  9. Replies
    10
    Views
    501

    Zully- If engine control module cannot be...

    Zully-
    If engine control module cannot be reached, car wont start! But why cant ECM be reached? Check for power supply and grounds to ECM. If all fuses are ok double check that supply is present at...
  10. Replies
    37
    Views
    1,220

    That cartoon was funny piece..lol Jack

    That cartoon was funny piece..lol Jack
  11. I replaced the cam adjustment valve N205 to see...

    I replaced the cam adjustment valve N205 to see if that corrects the misfire and yes it did! Car has been running great for the past 4 days with no issues. I have rechecked the fault memory, all...
  12. Replies
    9
    Views
    177

    CCM no communication could mean that the module...

    CCM no communication could mean that the module is dead but your case shows intermittent soi I would check for power supply and ground, make sure no loose connections on or fuses or CCM socket. Make...
  13. Replies
    9
    Views
    177

    You can check the CCM with multimeter for power...

    You can check the CCM with multimeter for power supply and ground connections. You can also read MVBs on various CCM functions using VCDS.
    You have not mentioned the EXACT concerns you have on car...
  14. Replies
    18
    Views
    1,160

    I would say try and carry out systematic fault...

    I would say try and carry out systematic fault finding/ closed circuit drain tests and solve the problem by elimination than substituting parts.
    Lock the car for about 2 hours and use multimeter to...
  15. Replies
    35
    Views
    1,437

    Yeah very different in this part of the world....

    Yeah very different in this part of the world. When I worked for VW Audi group overseas, we did updates free of charge. Regardless of what works order a customer request for example oil change, we...
  16. Replies
    35
    Views
    1,437

    I am gonna touch on this firmware update thing. I...

    I am gonna touch on this firmware update thing. I also had a similar experience with the dealer, when firmware update request is mentioned, the dealer seem as if they have no idea what one is...
  17. Thread: O2 Sensor Codes

    by TFSI
    Replies
    22
    Views
    661

    Looks like you are a new user with first posting?...

    Looks like you are a new user with first posting? I would say post full vehicle scan so that you are likely to get the needed help or input related to a problem..That helps forum member share ideas.
  18. Replies
    23
    Views
    426

    Uwe- Intrerface serial number can be found...

    Uwe-
    Intrerface serial number can be found where?is it on the DLC or so?
  19. Replies
    23
    Views
    426

    I can do all the rest but not re-code all...

    I can do all the rest but not re-code all controllers with same WSC, new to me. How do I get such screen on vcds? Oh and if so you mean I should try recoding each module in car with 034743 wsc?
  20. Replies
    23
    Views
    426

    Jack- Thanks. But how can one reboot entire...

    Jack-
    Thanks. But how can one reboot entire car?Or you mean the special battery voodoo thing?
    Wiper switch positions respond in 09> MVBs..Steering Column Switch Information shows zero when wiper...
  21. Replies
    23
    Views
    426

    Alright noted. I did ground check on hood...

    Alright noted.
    I did ground check on hood connector T2a/1 and ground checks ok. I did continuity test between T2a/2 brown and green wire to the onboard unit connector F/6 also checks out ok. I did...
  22. Jack, Car is out of dealer warranty. No fuel...

    Jack,

    Car is out of dealer warranty. No fuel in oil found.
    Car starts and runs ok during cold start. Soon as engine temp gets to about 55 degrees idling thats when misfire in all cylinders...
  23. Replies
    23
    Views
    426

    Thanks, Uwe it sound the same way to me too..but...

    Thanks, Uwe it sound the same way to me too..but also seen some vacant relay spots on J519... see pic. I hope these pics are clear enough..
    https://imgur.com/a/fTUC9Au
    ...
  24. Replies
    23
    Views
    426

    I need to re-install elsa..pc crashed. Do you...

    I need to re-install elsa..pc crashed. Do you have temporary WD to share please Jack?:)
  25. Replies
    23
    Views
    426

    when I unplug it still shows "hood open" in vcds....

    when I unplug it still shows "hood open" in vcds. When I reconnect and even close the hood, it still shows as "hood open" in vcds.. I have continuity in the switch. I am thinking there could be...
Results 1 to 25 of 213
Page 1 of 9 1 2 3 4