Search:

Type: Posts; User: NEtech

Page 1 of 20 1 2 3 4

Search: Search took 0.07 seconds.

  1. Replies
    10
    Views
    249

    Test if you should have Adaptation channel 82 in...

    Test if you should have Adaptation channel 82 in [17-Instrument].
    If so, change new value, to 2 or 1, if possible.
  2. What is the reason, you think that Group should...

    What is the reason, you think that Group should be rail pressure :confused:
    That should be learned Throttle adaptions.

    There are fuel pressures at for example Group 103, 140
  3. Replies
    6
    Views
    322

    Performed in [03-ABS] Got to Adaptation and...

    Performed in [03-ABS]

    Got to Adaptation and find this Channel:
    IDE04774-IDE06589 Vehicle and trailer stabilization - Trailer information evaluation
    and deactivate it.

    Do Steering limit stop...
  4. Replies
    22
    Views
    10,191

    Yes the Measurement Groups I wrote, should be the...

    Yes the Measurement Groups I wrote, should be the answer on your question.
    230,1,(G584) = 3.980 V
    231,1,(G520) = 63.0C
    234,3,(G583) = 970.0 mbar
  5. Replies
    22
    Views
    10,191

    That is not an Autoscan.;) I guess the...

    That is not an Autoscan.;)

    I guess the measurement data should be similar as on BMY/BLG engines.
    Measurement Group, Field:
    230,1,(G584)
    231,1,(G520)
    234,3,(G583)

    Please post Controller map...
  6. Replies
    6
    Views
    287

    Coding in [19-CAN Gateway] is wrong, Byte 8 Bit 0...

    Coding in [19-CAN Gateway] is wrong, Byte 8 Bit 0
    E9807F06100202F101
  7. Thread: Coding Battery

    by NEtech
    Replies
    9
    Views
    284

    As far as I can find, "Binary AGM" is not used...

    As far as I can find, "Binary AGM" is not used yet.

    In my opinion it is for the future.
    If you buy a brand new CAN Gateway (for an Golf 8), it is coded 130 Ah Battery and "Binary AGM".
    And a...
  8. Replies
    14
    Views
    587

    That is not possible. But be able to...

    That is not possible.


    But be able to emulate, does not mean, we know all procedures! Which is impossible.
    If you want to be able to do everything possible, you must buy ODIS diagnostic system...
  9. Replies
    17
    Views
    677

    I have 1581 Control units found in Autoscan files...

    I have 1581 Control units found in Autoscan files with Part Number 5Q0 907 530.
    123 Control units have 230V inverter [PR-9Z3], with Byte 0 Bit 3 active (as you have also done).
    None of 1581 Control...
  10. Replies
    17
    Views
    677

    Why do you activate Byte 7 Bit 0 ? Try to undo...

    Why do you activate Byte 7 Bit 0 ?
    Try to undo that.

    In more than 1500 Gateway's I have searched, none have this bit, even they have Byte 0 Bit 3 (that is not 1500 gateway's).
  11. Try and post Adaptation Controller maps, from...

    Try and post Adaptation Controller maps, from [17-Instrument] and [19-CAN Gateway].
  12. Replies
    13
    Views
    402

    More than 20 year VW diagnostics. 7P0 is VW...

    More than 20 year VW diagnostics.
    7P0 is VW Touareg part number not Audi.
    Part numbers can be found on for example Partlinks24.
    Also import Battery history file into VCDSToolbox and see Record 4...
  13. Replies
    9
    Views
    281

    Check BCM, Channel 099, Factory mode is probably...

    Check BCM, Channel 099, Factory mode is probably active, must be inactive.
  14. Replies
    25
    Views
    7,807

    Alpha 14 (@ #1...

    Alpha 14 (@ #1)
    Bugfixes
    Open lbl xpl files, with Ctrl Enter
    etc
  15. Replies
    13
    Views
    402

    Original spare part for this model is 110 Ah,...

    Original spare part for this model is 110 Ah, 000915105DL
    Original installed is the 8K0915105F
    You are trying to install 105 Ah 7P0915105D

    I doubt that is accepted by the controller.
    If you...
  16. Drive and use procedure, turn steering complete...

    Drive and use procedure, turn steering complete to left and right, for steering angle error.
    Delete all error codes.

    Connect powerful battery charger.

    Disable start/stop button or what is...
  17. Replies
    7
    Views
    210

    Select: MA - VW Marine Engines And post...

    Select: MA - VW Marine Engines

    And post channel maps from engine.
    [Applications]
    [Controller Channel Map]
    - Controller Address = 01
    - Login or security code: Leave blank
    - Function: Measuring...
  18. "Erase counter for start and stop processes", I...

    "Erase counter for start and stop processes", I don't think it is necessary.

    Is parking brake activated?

    Before starting basic setting, find an mark these measuring values (if available):...
  19. Replies
    10
    Views
    327

    Have you tried access to Address [65] ?

    Have you tried access to Address [65] ?
  20. Replies
    24
    Views
    729

    Does the "saving value 5" work ? And you have...

    Does the "saving value 5" work ?
    And you have read about synchronization?


    It is not an dictate, it is trying to give an help.
    There are so many ways for remotes and things that can go wrong, I...
  21. Replies
    13
    Views
    361

    I think if you change Byte 11, Byte 04.. should...

    I think if you change Byte 11, Byte 04.. should also be changed.
    Like this:

    02730202FF00000021220001001800001F0100340100010546
  22. Thread: DQ500 0DL

    by NEtech
    Replies
    12
    Views
    528

    It is 0BH (hardware), a search for DQ500: Here...

    It is 0BH (hardware), a search for DQ500:
    Here and here..
  23. In this case the low and high value are learned...

    In this case the low and high value are learned and saved in the controller.
    If G365 or the controller is exchanged, you have to run adaptation, Channel 01.
    And run a full open and close sequence,...
  24. Replies
    13
    Views
    474

    It is only possible on some diesel, but you are...

    It is only possible on some diesel, but you are free to test, Basic Settings MWB 050
  25. This is just 2 different open/close runs, one...

    This is just 2 different open/close runs, one good and one bad.
    I have defined the x-scale start and stop, I made a offset so it is easier to see.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4