Search:

Type: Posts; User: bjornix

Page 1 of 3 1 2 3

Search: Search took 0.01 seconds.

  1. Nice suggestion, but with the wires already...

    Nice suggestion, but with the wires already pulled up by the front I ended up splicing onto BCM T52c/15 and T52c/16. Worked great and the control unit came to life. Hopefully no more issues when the...
  2. Damn! Now that you mention it I seem to vaguely...

    Damn! Now that you mention it I seem to vaguely remember that I spliced onto CAN gateway T20e/16 and T20e/6 for the headlight range module. And looking at the instructions that came with the tow bar...
  3. Tow bar retrofit - No response from controller - Now what?

    I'm doing a tow bar retrofit on my 2011 Passat B7 euro spec. Got the Westfalia swivel tow bar (3AA 803 880 E) from a scrap yard and the control unit (7N0 907 383) came with it. Wiring harness was...
  4. Replies
    7
    Views
    444

    Great, thanks! Think I will give the rear lid...

    Great, thanks! Think I will give the rear lid button case with integrated washer nozzle a try. Do you happen to have the part numbers for the extra parts needed? Splitter, coupling elements, hoses...
  5. Replies
    7
    Views
    444

    @siLc: That does look a lot easier than cutting...

    @siLc: That does look a lot easier than cutting of the existing sheet metal, and would undoubtedly work with the existing wiring. But does it really get the job done when the lens is covered with...
  6. Replies
    7
    Views
    444

    2011 Passat B7 Euro Spec - RVC

    I need to replace the rear lid on my Passat estate and I was thinking of upgrading the rear view camera while I'm at it. My current RVC is mounted above the license plate next to the push button for...
  7. No, I have not made any changes to the module.

    No, I have not made any changes to the module.
  8. According to ETKA the D revision is the current...

    According to ETKA the D revision is the current one for cars manufactured up until 26.05.2014, after that it is F revision. PR codes (B/W vs. color MFD etc.) does not seem to matter in terms of...
  9. I have compared the coding of all modules and...

    I have compared the coding of all modules and they are identical from when I had a working D revision except for BCM where I have altered the byte 18 value and added headlight washer (retrofit). Old...
  10. Thanks for your suggestions, but a log from when...

    Thanks for your suggestions, but a log from when I had a functioning D revision module confirms the ABS coding has not changed. I also did find a log that I believe was created sometime between when...
  11. TPMS display in MFD is missing (2011 3C Passat)

    Some time ago the TPMS warning light showed up in my instruments. It turned out that the control unit could not be reached and had to be replaced. To get rid of the warning light until I could get...
  12. Bulb error on both unfortunately...

    Bulb error on both unfortunately...
  13. 5C, 5E, 8E, 93 - Bulb error. 62 - No tail light....

    5C, 5E, 8E, 93 - Bulb error. 62 - No tail light. 5D, 5F, 61 - Dim tail light. 63 - No tail light (daytime) / normal tail light (dark outside)
  14. Tried 19, 26, 27, 28, 30, 3A, 3C, 3F, 42, 43, 49,...

    Tried 19, 26, 27, 28, 30, 3A, 3C, 3F, 42, 43, 49, 54, 56, 63, 78, 7F, 81, 84, 85, 86, 87, 88, 89, 8A, 8B, 8F, 91, 95, 99 and 9B. All except for 63 and 91 gives bulb out error, but other than the...
  15. If the front bumper DRLs' only function in an OEM...

    If the front bumper DRLs' only function in an OEM xenon setup is as additional CH/LH lights then I'm fine with going with your suggestion and bridging them to the fog lights. After changing byte 18...
  16. Bi-xenon retrofit on Passat B7 Euro - A couple of unresolved issues

    About a year ago I retrofitted bi-xenon headlights on my 2011 Passat B7 Euro spec and I got it working reasonably well. Later I also added headlight washers to make sure it is road legal. Recently I...
  17. Replies
    5
    Views
    1,144

    The question is whether or not the relay holder...

    The question is whether or not the relay holder was correctly wired when I purchased it and if I am making a problem out of nothing. It seems we agree that it was not.

    Oh well, guess I will try to...
  18. Replies
    5
    Views
    1,144

    I'm not sure. I downloaded the complete circuit...

    I'm not sure. I downloaded the complete circuit diagram for my car on erwin and it says relay goes to position 33 in fusebox near A-pillar. No other devices is listed in that position and it says to...
  19. Replies
    5
    Views
    1,144

    Headlight washer retrofit relay wiring

    I am doing a headlight washer retrofit on a 2011 Passat and I ordered the wiring loom from car4style.de. According to the instructions it should be plug and play, but something did not seem quite...
  20. I found the byte 18 value for a) still have the...

    I found the byte 18 value for
    a) still have the same headlight behavior
    b) tail lights ON during daytime
    c) rear fog light working
    d) no DTC's

    That value was 91. I also disabled the PRL via...
  21. No, I'm done :p Obviously if the value of the...

    No, I'm done :p Obviously if the value of the checkboxes doesn't match the behavior you are getting then something is off. I'm usually picky about those things, but now I'm in this with about 15...
  22. The last couple of days has been an uphill battle...

    The last couple of days has been an uphill battle and I've spent numerous hours trying to get this right. Some of the behavior I cannot even explain. Let me try to recap...

    - I started out by...
  23. I tested this yesterday and had the same results...

    I tested this yesterday and had the same results as this guy: Light sensor does not engage on ignition only. However, with the engine running and lights on auto a worklamp directed towards the light...
  24. Ok, thanks! Do you have a suggestion for the test...

    Ok, thanks! Do you have a suggestion for the test procedure of byte 18? I could check if the LEDs are working in daylight, but the light sensor requires the car to be running to function and the car...
  25. I'll admit that I might got too complacent too...

    I'll admit that I might got too complacent too soon. I tested the auto function today by directing a work lamp at the light sensor and after a few seconds both the main beam and the LEDs shuts off....
Results 1 to 25 of 51
Page 1 of 3 1 2 3