Search:

Type: Posts; User: RS4v8

Search: Search took 0.01 seconds.

  1. Additional information: Over and above the...

    Additional information:
    Over and above the listed tests I did some physical checking of some connections that were available to me.
    I opened the N276 connector/power supply that was labeled as...
  2. The N276 that has shorted to ground is brand new....

    The N276 that has shorted to ground is brand new. So is it reasonable to suspect the electrical fault?
    Also is it reasonable to suspect that rail pressure is leaking down to 6 bar (This seems to be...
  3. Aaah. I did the auto scan and a few checks before...

    Aaah. I did the auto scan and a few checks before and after hard start. I cleared the DTCs in between the 2 tests as @Dana suggested. I went for a drive and did a scan afterwards. A much clearer...
  4. Good point @PetrolDave. Answering in order: I am...

    Good point @PetrolDave. Answering in order:
    I am not sure as to what was opened (walnut blasting method was used) except that intake manifold would have to be opened.....
    But a bit more...
  5. Thanks @Uwe. How is this (code paste)? Hopefully...

    Thanks @Uwe. How is this (code paste)? Hopefully RS4 expert is on look out.

    @Dana: Thanks. I suspected so as it seems to be a common question but not always answered. I need to purchase my basic...
  6. Greetings from South Africa (B7 RS4 question)

    I just received my Hex-V2 cable. Best thing that has ever happened to me and my car.

    Now for the core of my first post. I did a scan on an '07 B7 RS4 and this is what I got. History: I had carbon...
Results 1 to 6 of 6