Search:

Type: Posts; User: Orchid70

Page 1 of 3 1 2 3

Search: Search took 0.01 seconds.

  1. Replies
    31
    Views
    913

    Update on this car. Owner came back with EPC...

    Update on this car.
    Owner came back with EPC light lit.
    Fault code 16786 - Exhaust Gas Recirculation (EGR): Excessive Flow

    Took out the EGR and it was stuck open a bit.

    I took it out and...
  2. Replies
    31
    Views
    913

    Jack - I forgot all about it. A fuse then, on...

    Jack - I forgot all about it.
    A fuse then, on the brown wire coming right from the ECU?
    What size would be correct? 10A?
    The other blue/yellow wire to the heater, is fused 10A.
    Also - I need to...
  3. Replies
    31
    Views
    913

    Fixed

    So - the car is fixed.
    It WAS the throttle - so called "VDO" looks like a pirate copy to me.
    Look at these two pictures. I took a part the VW original Throttle body in plan to change the electric...
  4. Replies
    31
    Views
    913

    Wrong size on the throttle - so have to find an...

    Wrong size on the throttle - so have to find an other one to test with.

    Connection of the brown/blue wires from the sensors to the ECU connector (on the left in the picture):...
  5. Replies
    31
    Views
    913

    It did not help with ground wire. Same fault code...

    It did not help with ground wire. Same fault code on one of the sensors on the Throttle.
    Drove to a friend and got a good known VW Throttle to test with.
    I remembered to take a picture from the...
  6. Replies
    31
    Views
    913

    Shall do - hubby said the same =)

    Shall do - hubby said the same =)
  7. Replies
    31
    Views
    913

    If this is correct - then I have a broken/damaged...

    If this is correct - then I have a broken/damaged wire - or Im not getting whats wrong - how can any of it work if theres no ground??:
    http://web.mit.edu/dennis/www/vw/grounds.html
    I put my hubby...
  8. Replies
    31
    Views
    913

    So: None of the components/sensors that should...

    So:
    None of the components/sensors that should get their ground from this "220 Earth connection (sender earth), in engine wiring harness" has any continuity to ground.
    All have continuity between...
  9. Replies
    31
    Views
    913

    PS - Ive ordered this:...

    PS - Ive ordered this:
    https://www.flukenetworks.com/edocs/datasheet-pro3000-tone-and-probe-family
  10. Replies
    31
    Views
    913

    So Ive checked for contiunity from ECU to...

    So Ive checked for contiunity from ECU to Throttle and from ECU to pedal.
    All good - except the number "220 Earth connection (sender earth), in engine wiring harness"
    I tried to find where all...
  11. Replies
    31
    Views
    913

    View Post

    <3 <3 <3 <3

    "J448-for-Vodka-toast.png"... for me?

    :thanks::D

    Hope you didnt have to move more lawn today... hard work - Ive done it, by hand..... to get more place for the "cars".
  12. Replies
    31
    Views
    913

    Ive been looking into a short finder - tone...

    Ive been looking into a short finder - tone generator - do you have a recommendation on what to get? Not too fancy but still usable.
  13. Replies
    31
    Views
    913

    FINELLLY - I have understood what you are saying...

    FINELLLY - I have understood what you are saying Jack =P
    Kahlua is mmmmmmmmmmm nice =)
    Im from Finland - and we like VODKA (Koskenkorva)!! But Im starting to get too old - so I usually mix myself...
  14. Replies
    31
    Views
    913

    Jack - I have not bought a tone generator. So...

    Jack - I have not bought a tone generator.
    So wiring diagram and folowing the colours is what I have =/
    This problem have been there for years (car bought by our friend in the automn of 2017) -...
  15. Replies
    31
    Views
    913

    I bent the pin back and took a drive - same fault...

    I bent the pin back and took a drive - same fault remained.
    Fault code 17950 and the accelerator pedal gives 41%/14% up to 97%/97% values.
    So Will open the ECU now
    And measure wiring between ECU...
  16. Replies
    31
    Views
    913

    J448 pin T121/100 is one of the signal to EGR...

    J448 pin T121/100 is one of the signal to EGR
    J448 pin T121/101 I cannot find where it goes to.
  17. Replies
    31
    Views
    913

    Found the fault?!! Finelly ECU out - someone...

    Found the fault?!!
    Finelly ECU out - someone have been there before - the wire holder wasnt snapped round the loom.
    Pin number 101 is bent together to pin 100 on the ECU...
    Check the colour on...
  18. Replies
    31
    Views
    913

    Cannot erase the Address 03: ABS 01304 Engine...

    Cannot erase the Address 03: ABS
    01304 Engine Controle Module - DTC precent

    Taking out the ECM to the local electric repair guy and see if we can see whats happened to it.
    And ordering both O2...
  19. Replies
    31
    Views
    913

    Yes? Sometimes I have hard time understanding...

    Yes?
    Sometimes I have hard time understanding you =) (Swedish or actually Finnish, you see - english is not my native language).
    Im trying to figure out how to manage to fuse the heated circuits,...
  20. Replies
    31
    Views
    913

    I found the old fault codes I had from last...

    I found the old fault codes I had from last summer when the car went into limp home and I do not like what I see, now when I know better:

    17591 - O2 sensor short to plus - intermittent
    17953 -...
  21. Replies
    31
    Views
    913

    Connector to the Throttle body is new. The...

    Connector to the Throttle body is new. The locking pin was broken.
    Battery is not that very healthy. But I dont like those other fault codes in supply voltage and engine control module.....
  22. Replies
    31
    Views
    913

    This is how the autoscan looks like - again =/: ...

    This is how the autoscan looks like - again =/:


    Wednesday,12,June,2019,14:34:56:18201
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
    VCDS Version: 18.9.1.0 (x64) HEX-V2 CB:...
  23. Replies
    31
    Views
    913

    Fault code 17950

    Golf IV Variant 2003
    Engine BCB

    EPC light lits first - after a while Engine light comes on.
    After restart - no MIL.
    Fault code: 17950 - Angle Sensor 1 for Throttle Actuator (G187): Implausible...
  24. Is there an easy way to find out if the ECU has...

    Is there an easy way to find out if the ECU has gone to 85 mode? The fuse is good and the fans shut down when I pull it.

    There is only one control module and thats for the AC fan. The engine fan...
  25. Golf V 1,9 Tdi Both coolant fans on high speed when ignition on

    No fault codes for engine (other than glowplugs).
    AC doesnt work - see fault codes.
    Outdoor temp sensor works.
    I can shut both fans off in Activations/Output.
    G62 shows right temperature.
    I...
Results 1 to 25 of 54
Page 1 of 3 1 2 3