Search:

Type: Posts; User: kamold

Page 1 of 16 1 2 3 4

Search: Search took 0.03 seconds.

  1. Replies
    27
    Views
    1,910

    DQ250 for the medium term. Unless I can find...

    DQ250 for the medium term.
    Unless I can find another DQ500 mechatronics to test I'm not sure I can try it again.
    At the moment it's sitting on the floor taking up space in my friend's workshop :(
  2. Yes you are correct, this should be the display...

    Yes you are correct, this should be the display config adaptations:
    ENG122230-ENG142097-Dashboard_Display_Configuration-ability_switch_nav_maps,OFF ...
  3. After CP is removed, only the radio will work. ...

    After CP is removed, only the radio will work. FEC need to be restored for other features including bluetooth.
  4. You'll need more than the correct coding to get...

    You'll need more than the correct coding to get it working.
    There are licenses (Feature Enable Codes) that control the availability of features like navigation, App connect (Carplay, Android Auto)...
  5. Yes I have done this many times, using pre-coded...

    Yes I have done this many times, using pre-coded keys.
    However in this case (and possibly in OP's) they didn't have the correct tools but attempted to start the immo learn procedure anyway. This...
  6. Replies
    16
    Views
    1,605

    In the end I bought some stronger struts....

    In the end I bought some stronger struts.
    Tailgate works to full height again :)
  7. Randomly came across this post and I have seen...

    Randomly came across this post and I have seen something similar so thought I'd post in case anyone comes across something similar (realise it's way too late to assist the OP)

    I had someone who...
  8. My apologies I only skimmed and didn't notice the...

    My apologies I only skimmed and didn't notice the RVC compact at 6C.
    It has no basic settings so needs calibration, however it will still display the image when otherwise correctly configured.
  9. In 5F you need to enable RVC. Byte 19 bit 4...

    In 5F you need to enable RVC.
    Byte 19 bit 4 needs to enabled.

    VPS is for highline RVC modules, you might need to change those back to disabled.
  10. Replies
    82
    Views
    58,838

    OK cool good to know thanks. Yes this car has...

    OK cool good to know thanks. Yes this car has older 5Q0 radar.
    If it's an issue can look into 3q0 or 3qf radars
  11. Replies
    82
    Views
    58,838

    Has anyone found a solution for this issue?

    Has anyone found a solution for this issue?
  12. Replies
    0
    Views
    241

    B6 projector retrofit

    Please feel free to delete if this is not really appropriate as it doesn't involve VCDS at all..

    However I wouldn't have gotten to the point where I would have been willing to try this sort of...
  13. Replies
    10
    Views
    1,954

    PQ platform vehicles' CP scheme doesn't include...

    PQ platform vehicles' CP scheme doesn't include BCM like it does in MQB platform vehicles..
  14. This seem like it's a cluster software issue. ...

    This seem like it's a cluster software issue. The DM get's it's time from the instrument cluster over CAN.
    If the software is too old it looks like the message doesn't get sent or is in a different...
  15. You need to run the calibration routine per the...

    You need to run the calibration routine per the workshop guide using ODIS and the correct calibration board.
    Also your steering rack is not coded for HCA.
  16. Replies
    82
    Views
    58,838

    If the gateway is new or from a car that did not...

    If the gateway is new or from a car that did not have drive profiles then yes those parameters should be loaded.
    It sounds from the error that the gateway does not have the correct parameter set.
  17. Replies
    82
    Views
    58,838

    Drive select is an FEC in the gateway. You just...

    Drive select is an FEC in the gateway. You just need to restore FEC on the new gateway module using ODIS online.
  18. Unfortunately you can't because ACC is a FEC and...

    Unfortunately you can't because ACC is a FEC and requires the correct license to be loaded to the radar module. As the license is tied to the VIN, this is not something that can be accomplished with...
  19. Replies
    28
    Views
    2,824

    Would be helpful to post a current autoscan now...

    Would be helpful to post a current autoscan now that you've resolved the more serious issues, using your V2 interface.
  20. Replies
    28
    Views
    2,824

    Yes. Restore fec to gateway and you will get...

    Yes.
    Restore fec to gateway and you will get cruise control back, drive select, and also fix the incorrect coding fault on powertrain
  21. Replies
    28
    Views
    2,824

    You need to restore FEC to the gateway module....

    You need to restore FEC to the gateway module.
    When CP is removed, it also clears the installed FEC. Drive select is a SWaP feature, so it needs to be restored to the gateway using ODIS online.
  22. Just a correction (thanks golfi_vend) regarding...

    Just a correction (thanks golfi_vend) regarding PQ CP scheme - it also includes the radar where factory fitted.
  23. Replies
    19
    Views
    1,274

    Looks promising

    Looks promising
  24. Replies
    19
    Views
    1,274

    As downtime has said you would to try and find a...

    As downtime has said you would to try and find a car that had the SIMOS 10.12 ECU that also had ACC from factory.
    Passat B6/B7 used the MED9.1 and later MED17 ECU and these are what had ACC support...
  25. Yes the car needs to have been powered on with...

    Yes the car needs to have been powered on with it's proper complement of CP matched modules before swapping in the foreign module.
Results 1 to 25 of 384
Page 1 of 16 1 2 3 4