Search:

Type: Posts; User: El Polaco

Page 1 of 3 1 2 3

Search: Search took 0.01 seconds.

  1. Replies
    9
    Views
    302

    Nice to know that worked out and thanks for...

    Nice to know that worked out and thanks for posting an update.

    Josh
  2. Replies
    9
    Views
    302

    I do control valves weekly on PXE16 compressors...

    I do control valves weekly on PXE16 compressors and have been doing so for years. I'm in Florida and it's AC season almost year round. I've used the RKX branded ones and I don't feel they are any...
  3. Replies
    9
    Views
    302

    You can see from the data that the control valve...

    You can see from the data that the control valve is getting all the amperage it is requesting and you are at roughly 140psi which is low for the high side pressure when the compressor is running. ...
  4. Replies
    9
    Views
    302

    You need to evac. and recharge to see if your...

    You need to evac. and recharge to see if your refrigerant level is correct.
    Josh.
  5. Replies
    5
    Views
    534

    Another flooded Phaeton Kessy module

    Hello, everyone. I am dealing with a 2004 Phaeton 4.2 that has a flooded Kessy and no communication w/ VCDS. Sorry, no scan available. I am currently drying the car out and will triple check...
  6. Replies
    16
    Views
    6,678

    Its been a while but I am updating the thread and...

    Its been a while but I am updating the thread and letting the group know the car is fixed. The owner's daughter is going off to college in the fall and the heat wasn't working this winter so the car...
  7. Replies
    6
    Views
    3,331

    Thanks Jetta, 97. I just sent you an email.

    Thanks Jetta, 97. I just sent you an email.
  8. Replies
    6
    Views
    3,331

    That's what I was thinking. Of course its not a...

    That's what I was thinking. Of course its not a regular customer just someone who has been here once before for something minor. I have no history on this car. They said it shut down close to the...
  9. Replies
    6
    Views
    3,331

    2006 Passat 2.0 FSI Replacing ECU

    Hello, everyone. I have a 2006 Passat 2.0 FSI that needs an ECU. I have separated the cover from the housing and there is a burnt spot on the board. The insides reeks of burnt electronics. ...
  10. Replies
    121
    Views
    54,705

    "Readiness bit for EVAP & LDP are shared,...........

    "Readiness bit for EVAP & LDP are shared,........ so if it's passed on its own....... don't touch it. ( STOP THAT! )" Yes, I understand this. I haven't run the 070 or 071 since I noticed the...
  11. Replies
    121
    Views
    54,705

    Jack, thanks for replying. I forgot to mention...

    Jack, thanks for replying. I forgot to mention that I was unable to locate any intake leaks when I smoke checked the engine. The autoscan I posted above is a few months old. I have another one...
  12. Replies
    121
    Views
    54,705

    I'm trying to trouble shoot an 05 3.2 A4 quattro...

    I'm trying to trouble shoot an 05 3.2 A4 quattro with the same P2404. In the engine module mine says component: FSI 3.2l V6 0060. I called my local Audi dealer but couldn't get an answer. It looks...
  13. Replies
    6
    Views
    7,695

    Ok, down to two codes for the component...

    Ok, down to two codes for the component protection. The module not coded fault is gone. Looks like that's all I can do here. The vehicle will have to go to the dealer.

    thanks
    j.
  14. Replies
    6
    Views
    7,695

    The amp got wet from the sunroof drains. It was...

    The amp got wet from the sunroof drains. It was dry when I took it apart and its been raining like crazy here for the past week and its still all dry in the car. I also verified all the drains were...
  15. Replies
    6
    Views
    7,695

    Coding BOSE amp Audi Q7

    Can anyone help with the proper coding of the BOSE amp in 47 Sound System or will this vehicle have to go to the dealer? The amp got wet and I sent it out for repair. I did not have a log of this...
  16. Replies
    23
    Views
    35,891

    Go into measuring blocks group 91 in the engine...

    Go into measuring blocks group 91 in the engine controller and see if the adjuster is changing with RPM. It helps to have data from a good working car to compare with. Like Jack suggested, oil...
  17. Thread: 2002 Audi TT

    by El Polaco
    Replies
    6
    Views
    4,738

    A customer of mine has a dune buggy with a...

    A customer of mine has a dune buggy with a magnetic starter relay/switch. Since it has no doors and he goes to the beach a lot he doesn't need or want a key. When he wants to start the vehicle just...
  18. Replies
    16
    Views
    6,678

    I swapped out the air oil separator that appeared...

    I swapped out the air oil separator that appeared good with a new one and............it was. No, difference. I then smoked the motor one more time for good measure and nothing. I am going to send...
  19. Replies
    16
    Views
    6,678

    Jason, just so we are on the same page. This is...

    Jason, just so we are on the same page. This is an 08 with the later engine ( TSI ) not the FSI. There is also the SSP 824803 that deals with the chain driven TSI specifically. I should have...
  20. Replies
    16
    Views
    6,678

    Update. Low pressure fuel pressure is between...

    Update. Low pressure fuel pressure is between 92-87lbs while driving using a snap-on fuel pressure gauge. At idle it sits at 92, it blips down to 87 under load. The working "test" car is only at...
  21. Replies
    16
    Views
    6,678

    I just got another TSI Passat to do a side by...

    I just got another TSI Passat to do a side by side with some of the data. This is frustrating, I still don't see anything that stands out. This one has the filter in the tank. I can get a Genuine...
  22. Replies
    16
    Views
    6,678

    I have no reason to suspect this engine has ever...

    I have no reason to suspect this engine has ever been changed or messed with. The owners have been bringing this car here since about 2013. Also, like I mentioned above it is running just fine and...
  23. Replies
    16
    Views
    6,678

    It hasn't thrown a code for the G247 since before...

    It hasn't thrown a code for the G247 since before the rear main seal was replaced. I do have a used, untested, G247 on hand that came off a core engine. I'll swap them out and see if that makes a...
  24. Replies
    16
    Views
    6,678

    With the old air flow meter it pulls 151 g/s...

    With the old air flow meter it pulls 151 g/s @6100 rpm. That was with the intake vac. hose to the pcv/separator plugged off. A little shy of 160. The separator on the car is not new but was...
  25. Replies
    16
    Views
    6,678

    Update, After looking at the 02 sensor data, I...

    Update, After looking at the 02 sensor data, I decided to give it a shot and replace the 02 sensor. It's got 157k on it so it wouldn't hurt to give it a shot. Changing the sensor did not correct the...
Results 1 to 25 of 68
Page 1 of 3 1 2 3