Search:

Type: Posts; User: Golftwincharged

Page 1 of 4 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    4
    Views
    182

    I've had 3 occasions with this same fault code/s...

    I've had 3 occasions with this same fault code/s and indeed , confirmed this is the fault of the G676 sensor which needs replacing, unforntuately its quite some work to have replaced, which requires...
  2. Another Failed DSG7 mech unit, valve accumulator...

    Another Failed DSG7 mech unit, valve accumulator plate issues, replacing plate will fix this, but can this cause gearbox slipping?? in cases like this you get no gears..
  3. fix engine related issues first.

    fix engine related issues first.
  4. hope that is the issue, please keep us posted...

    hope that is the issue, please keep us posted with the results, thanks!!
  5. This is the DSG 7 0AM dry clutch, many mech unit...

    This is the DSG 7 0AM dry clutch, many mech unit issues relating pressure, this unit needs to maintain between 40 - 60 bars to fully functional and working, air lock can be a problem , also the...
  6. 1.4 tsi squeaks/funny noise on acceleration

    Hey Guys i have an annoying squeak on acceleration maybe around 1500 - 2000 rpm. around the time magnetic clutch engages, have anyone experienced this on the dual charge systems(CAVD,CTHD) ,if so may...
  7. in the mean time you find your auto scan, sounds...

    in the mean time you find your auto scan, sounds like you may have faulty solenoid valves in the mech unit, common problems with the DSG7 05981 /082 , im assuming Basic settings were successful? was...
  8. Replies
    9
    Views
    176

    how can we assist you, if you cant get us...

    how can we assist you, if you cant get us detailed information on this DSG Golf mk7 , where is the Auto-scan?????
  9. Replies
    4
    Views
    104

    soon Jack, the car left the garage, i will update...

    soon Jack, the car left the garage, i will update with auto scan soon, thanks again.
  10. Replies
    4
    Views
    104

    Thank you Jack!! I'm up and running!

    Thank you Jack!! I'm up and running!
  11. Replies
    4
    Views
    104

    Audi A3 ABS not coded (MK60EC1)

    Hey Friends, i have here an Audi A3 , customer said they unplugged the cluster and lost ABS module coding, can anyone assist me with their expertise ,:)

    Auto Scan
    ...
  12. in additional to Mr.Jack Fluid level and cooler...

    in additional to Mr.Jack Fluid level and cooler system needs to be correct and working so confirm this is ok if not fix that first, if not; next step is to replace the VB Printed circuits with...
  13. Replies
    19
    Views
    695

    you are hilarious , LOL :D

    you are hilarious , LOL :D
  14. Basic settings will fail and you will waste time,...

    Basic settings will fail and you will waste time, Most common failure for No reverse is the poor design for bearings on the Selector Shift fork for the 6/R, grinding noises don't sound too pretty?...
  15. Replies
    19
    Views
    695

    driving 20% throttle until all gears are selected...

    driving 20% throttle until all gears are selected , then coast until gears downshift and comes to a complete stop within 30 seconds, try this like 10 million times, and increase throttle over period...
  16. what do you refer to as horrible? what are the...

    what do you refer to as horrible? what are the symptoms you're having? update to 6561 firmware , not necessary the mech unit has an issue, the clutch and engagement bearings can also relate to...
  17. Replies
    19
    Views
    695

    try hard resetting tcm with pulling fuse, and do...

    try hard resetting tcm with pulling fuse, and do the process over again with vcds, test drive for a few more times and repeat, until it gets better and better, 09G requires patience and many tries,...
  18. yes clutches for K1 AND K2 WERE WORN, REBUILT THE...

    yes clutches for K1 AND K2 WERE WORN, REBUILT THE TRANSMISSION AND PROBLEM SOLVED, May not be a VB related issue, have you tried adaptation after solenoid change? any codes? what type of vehicle,...
  19. The nightmare of 09G , iv had an Audi TT parked...

    The nightmare of 09G , iv had an Audi TT parked for Hard Shifting issues a very long, I've swapped VB units until i got sick, found out the K2 Clutches were burnt when dismantled, and of course it...
  20. Replies
    1
    Views
    124

    so i flashed the tcm unit with updated software,...

    so i flashed the tcm unit with updated software, and it attempted to reverse for a moment and back to No Reverse state...any help i would appreciate .
  21. Replies
    1
    Views
    124

    VW MK7 GOLF NO REVERSE

    Hey Friends i have here a 2013 Golf Mk7 with the 0CW (newer verison to 0AM) Gearbox, i have have no reverse issues and jerky forwards, i have done the following:

    Changed the Bearings on the 6 and...
  22. Replies
    13
    Views
    693

    Updates, sorry but only now the the vehicle came...

    Updates, sorry but only now the the vehicle came back , so i did the vacuum test smoke method, so i pulled the spark plugs out and to found they are in a terrible state ,also sign of oil on the...
  23. Seems like everything that was deactivated using...

    Seems like everything that was deactivated using Adp Channels which were faulty , and was deactivated to keep SRS light to staying off after a few blinks , if you activate the channels you may find...
  24. Replies
    5
    Views
    219

    Adding to Mr.Uwe , pressure issues in the...

    Adding to Mr.Uwe , pressure issues in the valvebody can cause this code, i had a similar issue and the N440 Solenoid along with Valvebody of mech unit was faulty.
  25. Replies
    13
    Views
    693

    Hello Guys, now got the car back , i cleared the...

    Hello Guys, now got the car back , i cleared the codes on few days ago, and i just did an auto scan,


    Saturday,11,May,2019,10:00:24:17560
    VCDS -- Windows Based VAG/VAS Emulator Running on...
Results 1 to 25 of 90
Page 1 of 4 1 2 3 4