Search:

Type: Posts; User: sam1754

Page 1 of 4 1 2 3 4

Search: Search took 0.01 seconds.

  1. So, all has been done correctly, as ENtech said...

    So, all has been done correctly, as ENtech said after verifying byte 9 and 21 coding... but always the same issue!
    https://zupimages.net/up/19/41/3j8n.jpg
    I turned it to "clear glass" but same...
  2. I'll take time to see it. Yes, it's a soft...

    I'll take time to see it.

    Yes, it's a soft charger so it takes time to reach 12v but after that it's ok


    I made it 0, moving the steering wheel during calibration.


    What should it mean?...
  3. I found this on RT forum: And said

    I found this on RT forum:


    And said
  4. IDE10664-MAS01632,Current initial calibration:...

    IDE10664-MAS01632,Current initial calibration: details-Status,Installation position incorrect,
    IDE10664-MAS02543,Current initial calibration: details-VIN determined during...
  5. 1) Copy this file to:...

    1)
    Copy this file to:
    C:\Ross-Tech\VCDS\Labels\User
    Use latest VCDS 19.6.2
    I did it with the new file but I don't know what it's for? Can you explain it to me please?


    2) (Maybe not...
  6. I did what you said ( error 37 time delay...

    I did what you said ( error 37 time delay expired) and retryed calibration process and it always return the same fault code: C110A 76 [008] - Wrong mounting position ...
  7. https://zupimages.net/up/19/41/sggg.jpg...

    https://zupimages.net/up/19/41/sggg.jpg
    https://zupimages.net/up/19/41/07dq.jpg
    I waited a long long time after enterting s11111 but it still not accept security access......
  8. Target moved but I have the "ERROR: Request...

    Target moved but I have the "ERROR: Request Sequence Error" message again. And when I go to adaptation menu, the procedure is rejected!!!
    My confidence in VCDS becomes of pluis in smaller. It was...
  9. Ok, I went further... I copied the CLB file saw...

    Ok, I went further...
    I copied the CLB file saw your message when choosing camera calibration but IDE 10403 don't show any new information, just static calibration not done...
    For S11111, it said...
  10. So, All physical adjustements are OK, controlled...

    So, All physical adjustements are OK, controlled many, many times with me and my son. All is correct. Target is really accurate 0.1mm right!
    All is done with laser leveler and I verified with VW...
  11. As I changed the windscreen, fault came back. I...

    As I changed the windscreen, fault came back. I didn't notice it at that time but I knew the need to clear fault codes.
    So, as you and some other users let me ear it's probably sure VCDS won't work,...
  12. After erasing all DCTS, I managed to put right...

    After erasing all DCTS, I managed to put right wheels edge body heights. But it didn't allow me to do it for camera height. It was at 1338 and I wanted to put it at 1318 but it said "request out of...
  13. Hello NETech, my current autoscan is on page 6....

    Hello NETech, my current autoscan is on page 6.
    A5 controller channel map:
    ;SW:3Q0-980-654 HW:3Q0-980-654 --- Frt Sens. Drv. Assist
    ;Component:MQB_B_MFK H04 0010,...
  14. All over the net I found this on every systems...

    All over the net I found this on every systems (VCDS, ODIS, OBD11...)
    A5 controller
    security access 20103
    Basic settings
    1. search target
    2. initial online calibration
    3. static calibration...
  15. Replies
    19
    Views
    9,734

    Anybody can tell me how to do with VCDS, please?...

    Anybody can tell me how to do with VCDS, please? I looked at "basic settings" for A5 module and saw "searching target", I think it's the first thing to do but after that???
  16. Anybody can tell me how to do with VCDS? I looked...

    Anybody can tell me how to do with VCDS? I looked at "basic settings" for A5 module and saw "searching target", I think it's the first thing to do but after that???
  17. The target is printed on Tivek to be re-usable. A...

    The target is printed on Tivek to be re-usable. A friend made a target with solidworks at 1:1 scale to avoid any precision trouble. It cost 90€ but it's a real professionnal work.
  18. Hello, The new windscreen is ordered and the...

    Hello,
    The new windscreen is ordered and the local bodybuilder will do the job.
    For calibration, I'll do it in my garage... it'll take a long long time with many head scratchings!:rolleyes: VW...
  19. Oh it's not a secret:D! I live near Luxemburg....

    Oh it's not a secret:D! I live near Luxemburg. The society who can do calibration is in Auxerre. I agree with you, it's expensive.
  20. Replies
    19
    Views
    9,734

    Yes indeed, I'll use cross laser and weld an...

    Yes indeed, I'll use cross laser and weld an adjustable support like they use at car glass center. And I don't think it'll take only few minutes...perhaps some hours or a whole weekend.:o
    I'm happy...
  21. Replies
    19
    Views
    9,734

    Ok, we all have experiences and it's really...

    Ok, we all have experiences and it's really interesting. Not to search who is right but to find why and how it works. You both let me understand that it's not a question of board quality but a right...
  22. If I could, sure I will!!! Now it's no longer a...

    If I could, sure I will!!! Now it's no longer a question of money. A society can do it for 550€ (both ACC and camera) with a complete support, not the vehicule on the ground. But it's about four...
  23. Replies
    19
    Views
    9,734

    OK, I'm really happy to read that but I'm...

    OK, I'm really happy to read that but I'm septical, according to all I read over forums.
    Are you sure it's possible even if the camera calibration mismatch with VIN number?
  24. Replies
    19
    Views
    9,734

    Bonjour Seb60, I don't want Uwe to say "english...

    Bonjour Seb60, I don't want Uwe to say "english speaking please", so I speak english.
    As you're French, have you another way to share your experience in French?
    I have the same problem than you....
  25. I read a few months ago "I do not think we have a...

    I read a few months ago "I do not think we have a procedure at this time.

    But here are some threads that you may find interesting:
    http://www.ross-tech.com/Search-Resu...%20calibration

    -Uwe-"...
Results 1 to 25 of 88
Page 1 of 4 1 2 3 4