Search:

Type: Posts; User: Spacewalker

Page 1 of 20 1 2 3 4

Search: Search took 0.05 seconds.

  1. your one is SW: 1K0 614 517 AC HW: 1K0 614 517...

    your one is
    SW: 1K0 614 517 AC HW: 1K0 614 517 AC
    ESP FRONT MK60-AT 0102
    MK60-AT is also good
    he use Mk70 - this is extremally basic pump
  2. wasting time play with ABS coding if you have...

    wasting time play with ABS coding if you have issue with other controlers , better tell every one what exactly did you done

    from what I see -
    25-Immobilizer -- Status: Cannot be reached...
  3. AC is a good one

    AC is a good one
  4. really ? Cluster is code to : Coding: 480001 =...

    really ?

    Cluster is code to : Coding: 480001 = TPMS
    and you telling every one - there is No TPMS

    paste my last coding and clear errors and post new vcds autoscan ,
  5. that one should be ok ...

    that one should be ok
    623C400D09220001460E02EB901A0091300400
  6. try this one ...

    try this one
    623C400D09220001460E02EB901A0091300000
  7. .....Problem is not ECU , only signal send from...

    .....Problem is not ECU , only signal send from ECU
    so conclusion is ??
    no matter if HW , or SW - unit
  8. ABS is tool old, This unit not support only...

    ABS is tool old,
    This unit not support only GPS signal, it also need ABS speed
    do simple test
    disconnect CAN, power up unit, and drive
    check GPS status , and you will see that even with...
  9. Hmmm. AM was also my genuine GW Address 19:...

    Hmmm.
    AM was also my genuine GW
    Address 19: CAN Gateway (J533) Labels:| 5Q0-907-530-V1.clb
    Part No SW: 5Q0 907 530 AM HW: 5Q0 907 530 F
    Component: GW MQB High 128 1265

    and...
  10. Replies
    8
    Views
    420

    old school did a 12V motor connected to ...

    old school did a 12V motor connected to clock spring
    new school use a CAN generator
    :)
  11. Replies
    8
    Views
    420

    clone millage only if cluster show 0 or up to...

    clone millage only if cluster show 0 or up to 100km, after that you can not do any changes in AID cluster . not even with 10000$ tool
  12. Replies
    10
    Views
    161

    up to 3m is ok longer that this is recommend...

    up to 3m is ok
    longer that this is recommend use ACTIVE one with power
  13. understand - you know that market better but...

    understand - you know that market better
    but that key he is asking for NBG010180T is a typical 4 buttons Kessy key
  14. this is MQB ....

    this is MQB ....
  15. Address 25: Immobilizer (J334) Labels:|...

    Address 25: Immobilizer (J334) Labels:| 5K0-920-xxx-25.clb
    Part No SW: 5K0 953 234 HW: 5K0 953 234
    Component: IMMO H07 0507
    Serial number:
    Coding: 000007


    This is kessy
    if key is oem -...
  16. use ODIS to load proper parameteres and coding

    use ODIS to load proper parameteres and coding
  17. Replies
    11
    Views
    256

    aha ...so who why they charge soo much money for...

    aha ...so who why they charge soo much money for Highline cluster ...if it show this same ?
  18. Replies
    11
    Views
    256

    MFA is a High Line cluster (cluster number...

    MFA is a High Line cluster (cluster number 7E0920970 for example)


    you can try add stalk

    I never care about lowLine cluster what options they show as they are LowLine
    is a like a...
  19. Replies
    11
    Views
    256

    I think 7E0 920 960 C is a lowLine . withount...

    I think 7E0 920 960 C is a lowLine . withount any function
    7E0 920 970 is with MFA
  20. Replies
    2
    Views
    118

    WHat i know , only brand new AC panel require...

    WHat i know , only brand new AC panel require do "first time run" if compresor is replace, and nothing more is touch , that error not apear.

    That AC panel seem to be faulty

    Address 08: Auto...
  21. it was say here many times what to do I ...

    it was say here many times what to do
    I retrofit AID over a year ago and add pictures what options to enable
    spend some minute and search
  22. seems Q7 cluster not support that coding this...

    seems Q7 cluster not support that coding
    this same happen when people swap tiguan AID cluster to Golf 7 AID - wrong fuel level etc ... and can not be do via coding
    software not allow to ...
  23. for example .... 020 D - pr code ERV - ECE ...

    for example ....
    020 D - pr code ERV - ECE Radio
    032 D - pr code ER8 - Taiwan
    045 F - pr code ER2 - Rest of World

    For Mexico code is ER3 (NAR)

    now you know where to look into etka...
  24. Replies
    4
    Views
    174

    4 attempts is not bad some people spend hours...

    4 attempts is not bad
    some people spend hours a...driving and driving...and still nothing :banghead:
  25. Replies
    4
    Views
    174

    code to that 0000302 but if you install...

    code to that
    0000302

    but if you install MFSW you need remove wiper stalk with TRIP computer access
    seems you keep it

    ten do G85 adaptation
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4