Search:

Type: Posts; User: pauls13

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. Will Odis offline work?

    Will Odis offline work?
  2. So an update for you all. I have got the correct...

    So an update for you all. I have got the correct light for one side and I have plugged in the old light which is damaged but still functional on the other side, and we still have no main beams, all...
  3. t Hi Don, the 773D and 774D lights are hard to...

    t

    Hi Don, the 773D and 774D lights are hard to come by hence the last-ditch attempt to try and salvage the situation, before accepting the truth that one needs to obtain the correct parts in order...
  4. Ok so a bit of an update, I managed to find the...

    Ok so a bit of an update, I managed to find the part number on one of the original damaged lights that I took off the car and it looks like I have the wrong part numbers fitted to the car. The part...
  5. I managed to fix the issue, the problem was the...

    I managed to fix the issue, the problem was the purple control wire which goes back to the ECU. It was broken inside the connector that connects to the fan. I have done a temporary repair and ran a...
  6. It's still not working, yesterday I re-coded...

    It's still not working, yesterday I re-coded address 55 with the original code and it has reduced the errors to just two as can be seen below. All my lights are working except the main beam which...
  7. Audi S3 8v facelift 2017 cooling fan stays on full speed

    Hi All

    I have a problem with my Fan in my car. The moment you put the key in the ignition, the fan runs at full speed. I am suspecting that it is the engine block temp sensor as it is giving an...
  8. Ok, so I tried the coding provided above but...

    Ok, so I tried the coding provided above but still got the error in address 55 and still have no main beam.
  9. Thanks for this morski, I will try that coding...

    Thanks for this morski, I will try that coding this afternoon to see if that helps
  10. Thanks Uwe

    Thanks Uwe
  11. I tried posting some pictures but they don't seem...

    I tried posting some pictures but they don't seem to have appeared
  12. And here is what I have fiited ...

    And here is what I have fiited

    https://i.imgur.com/oGPqWLk.jpg
    https://i.imgur.com/qXJIvJY.jpg
  13. so this is what was left of the old headlight...

    so this is what was left of the old headlight part number

    https://i.imgur.com/YRAxt26.jpg
  14. Hi Don, am pretty thick skin and don't offend...

    Hi Don, am pretty thick skin and don't offend easily so no probs. The headlight fittings all fit perfectly, in regards the part number, that's the only thing that I am not certain about after seeing...
  15. So a bit of an update, I logged onto partlink24...

    So a bit of an update, I logged onto partlink24 to see what part number it had for my lights and it came up with a different part number. the part number on partlink24 was 8V0941773C and 8V0941772C...
  16. Thanks for your help Don you been a great help,...

    Thanks for your help Don you been a great help, hopefully, I'll have a light bulb moment and will get this fixed somehow without getting Audi to look at it and charge me a fortune., at least the dip...
  17. Your instructions were clear, I just clicked the...

    Your instructions were clear, I just clicked the wrong option, here now is the correct option. Also, I noticed that both headlight fuses were blown in the fusebox inside of the car, I have replaced...
  18. Ok, so I tried all of the channel numbers in my...

    Ok, so I tried all of the channel numbers in my list, and none of them came up.
  19. when you say Tag numbers I assume you mean the...

    when you say Tag numbers I assume you mean the IDE numbers, i.e ENG102296? sorry for being such a newb, just want to be clear because when I added the eng number I there was nothing to select in the...
  20. How do I do that?

    How do I do that?
  21. Ok so I have compared the two outputs and these...

    Ok so I have compared the two outputs and these are the changes

    Old ballast
    IDE00018,Voltage terminal 15,11.756, V
    IDE02389,Ambient brightness,126, lx
    ENG103737,Left headlight leveling control...
  22. so I did the reading and got the below output ...

    so I did the reading and got the below output


    ;SW:8V0-907-357-A HW:7P6-907-357-B --- Headlight Range
    ;Component:MxB-ECU 001 0230, Coding:0EEE00102B230200...
  23. Question, how do I extract the coding should I...

    Question, how do I extract the coding should I get the old ballast to work?
  24. Hi DV52 all the modules are replacements as the...

    Hi DV52 all the modules are replacements as the originals were all damaged in the accident. the main issue I have is the main beams are not working. If I can get that working, that would be great.
  25. The headlights were the same part code as the...

    The headlights were the same part code as the lights that were damaged, the same with the ballast, all of them are the same part code
Results 1 to 25 of 26
Page 1 of 2 1 2