Search:

Type: Posts; User: sam1754

Page 1 of 5 1 2 3 4

Search: Search took 0.01 seconds.

  1. So, I ran an autoscan and there's no error, it's...

    So, I ran an autoscan and there's no error, it's the regulator that has to be changed... fifty euros... and half dash board to remove:D
  2. Thanks Symb, I think the time to take over the...

    Thanks Symb, I think the time to take over the steering wheel depend on A5 firmware version. Mine is very old!!!
  3. I don't have done it with my laptop so I'll do it...

    I don't have done it with my laptop so I'll do it again as soon as I can.
  4. It said no communication with controller...

    It said no communication with controller...
  5. Implement Climatronic module on 2007 POLO 9N

    Hello,
    A friend bought a 2007 Polo 9N with climatronic.
    He doesn't know much about this car and asked me why his climatronic didn't work. Blower is always at max speed and he can only control air...
  6. Thanks a lot! I'm really impatient to understand...

    Thanks a lot! I'm really impatient to understand what can makes differences.
  7. Ok, thanks for your reply. I wait for Symb adamap...

    Ok, thanks for your reply. I wait for Symb adamap because I'm curious but altogether, this menu is really unuseful...
    But it's still Symb-s post that made me start this retrofit. So I'm really...
  8. I don't remember where (it's a pity) I read that...

    I don't remember where (it's a pity) I read that warning intensity is only for steering wheel vibration intensity... right or wrong, I don't know but testing it seems to confirm it. But it's not...
  9. When I active lane assist menu in 5F adaptations,...

    When I active lane assist menu in 5F adaptations, All assistances menus appear.
    But after shutting down the ignition, only installed assistance still appear and full fonctionnal.

    I just tried...
  10. I also saw this:...

    I also saw this: ENG122227-ENG125816-Car_Function_Adaptations_Gen2-menu_display_Pedestrian_Assist_over_threshold_high,activated ,6
    I never activated it, it's also factory set... saw on my first...
  11. Yes, you have independant menu for Lane Departure...

    Yes, you have independant menu for Lane Departure Warning, Side Assist and Blind Spot (no menu, just function activation). That's what I understood.
    Thank you for the information, I didn't noticed...
  12. So, you've got the same camera and the menu is...

    So, you've got the same camera and the menu is functional.
    To make the menu appears, I had to enable the lane assist menu on 5F adaptation. As it's a package with side assist and blind spot, all is...
  13. I understand what you're saying and it seems to...

    I understand what you're saying and it seems to be right... but reading carefully is a hard tough for me, little french guy:p
    It's not really important to set it via menu but even when I put it on...
  14. It would be interesting that Symb tell us how he...

    It would be interesting that Symb tell us how he did.
    I didn't saw this menu on official vw's passat lane assist presentation and the other cars the dealer's lended to me (golf plus 2018 and tiguan...
  15. Ok for pedestrian detection. But for intensity...

    Ok for pedestrian detection.
    But for intensity warning, Symb said:

    And he has 3Q0 980 654 H camera... not 5Q0.
    Are you sure that it's a matter with camera type?
  16. So, I was so happy to enjoy lane assist that I...

    So, I was so happy to enjoy lane assist that I forgot a little thing.
    As you see in the menu, you can select weak...strong warning intensity. ...
  17. Replies
    21
    Views
    10,387

    First, have a good target. You must have your...

    First, have a good target.
    You must have your car's model software on your A5 camera (for values calcul).
    Enter good values for wheel edge housing on Adaptations with security access.
    Control...
  18. After a very long trip on highway to the ocean...

    After a very long trip on highway to the ocean side, I'm really happy to have done this retrofit. All works perfectly and is really usefull. When it's windy, it's magic!
  19. I drove 100kms, taking luxemburg's highways and...

    I drove 100kms, taking luxemburg's highways and it's really smooth. It seems to work better and better. Traffic sign recognition is very reliable even in working area.

    About VCDS and OBD11, I...
  20. OK, it works! ...

    OK, it works!

    https://image.noelshack.com/minis/2019/42/6/1571475331-img-20191019-094056.png

    I drove about thirty kms and it made a 9 kms dynamic calibration... wait and see.

    Even if traffic...
  21. YES! It's really a question of alltrack routine...

    YES!
    It's really a question of alltrack routine calibration. It calculates camera height from wheel heights housing. So, I put wheels' heights to obtain real camera height from controller routine....
  22. YES, I know VCDS nor OBD11 can change firmware......

    YES, I know VCDS nor OBD11 can change firmware... but I don't know anyone with VCP...:banghead:
    So, you're sure it's a matter of wrong data set? Apart wheel heights, an all track is the same car....
  23. So, I bought an OB11 pro and the procedure has...

    So, I bought an OB11 pro and the procedure has been done with the same issue. So, it's not due to VCDS and now I'm sure VCDS can do calibration.
    But the fact is that I bought a camera from an all...
  24. So, all has been done correctly, as ENtech said...

    So, all has been done correctly, as ENtech said after verifying byte 9 and 21 coding... but always the same issue!
    https://zupimages.net/up/19/41/3j8n.jpg
    I turned it to "clear glass" but same...
  25. I'll take time to see it. Yes, it's a soft...

    I'll take time to see it.

    Yes, it's a soft charger so it takes time to reach 12v but after that it's ok


    I made it 0, moving the steering wheel during calibration.


    What should it mean?...
Results 1 to 25 of 111
Page 1 of 5 1 2 3 4