Search:

Type: Posts; User: NEtech

Page 1 of 20 1 2 3 4

Search: Search took 0.07 seconds; generated 32 minute(s) ago.

  1. Replies
    3
    Views
    73

    Address 95. I guess Eric or Uwe, will answer...

    Address 95.

    I guess Eric or Uwe, will answer this. (FS#504)
  2. Replies
    3
    Views
    73

    They are all showed in the AutoScan, what other...

    They are all showed in the AutoScan, what other modules do you think should be showed ?


    Use the tab called "LT3".
  3. Replies
    4
    Views
    41

    You can check with your old AutoScan, if this...

    You can check with your old AutoScan, if this could be correct:
    13424012492200FEC81102EA921C0081380800

    After coding see wiki here
  4. I could have done it, but no, I have copied them...

    I could have done it, but no, I have copied them all in Danish translation, just to explain the abbreviation ABS.
    Let us say, it was just an check if somebody is using our text :D

    And Dana, there...
  5. I have made update suggestion.

    I have made update suggestion.
  6. Are you sure coding for [A5] is correct, Byte 9...

    Are you sure coding for [A5] is correct, Byte 9 and Byte 21
  7. Which controller ?

    Which controller ?
  8. Compare the 2 controller map files, then you see...

    Compare the 2 controller map files, then you see it.


    Maybe this:

    And this


    Some other items, first map:
    IDE00018,Voltage terminal 15,11.2, V
  9. I think you have to write every step you do. I...

    I think you have to write every step you do.
    I have doubts this is going to work.

    You have copied the new clb file to users?
    Don't use S11111 direct in [A5], it is only used in step 2)
  10. Sorry I forgot something in the CLB file, please...

    Sorry I forgot something in the CLB file, please download and copy the same (it is updated).
    I have difficulty to understand what and when you are doing something, it would be better if you made...
  11. Where do you see this in my information #85 ?...

    Where do you see this in my information #85 ?
    Please test as I wrote.


    Please show the link for this.


    It does not look like you wrote the SA, as I wrote S11111 ..
    Have you copied the CLB...
  12. Here is some information for one of the...

    Here is some information for one of the calibration procedures (Fast) for [A5-Frt Sens. Drv. Assist]
    Part No SW: 3Q0 980 654
    ASAM Dataset: EV_MFKBoschMQBB

    Information:


    Calibration setup...
  13. No I had to short cuts :facepalm: Right click on...

    No I had to short cuts :facepalm:
    Right click on short cut, App info, 0.02x old and 0.032 is working correct.
    Is it possible to see the version number 0.032 in VCDS-Mobile ?
    ...
  14. I am not able to use the VCDS-Mobile Assistant...

    I am not able to use the VCDS-Mobile Assistant directly.
    I have not access to last button on many screens, so I cannot press Go back.
    If I choose, Go to Browser, then it is possible to access.
    I...
  15. Replies
    6
    Views
    113

    Try this before coding. [Options] [User...

    Try this before coding.
    [Options]
    [User Interface and Identification]
    write numbers for wsc, importer, device no.
    For example 12345 123 23456
    [Save]
    [Close VCDS]
    Start VCDS
  16. Replies
    6
    Views
    113

    As far I can see, Coding should be: 0000274 ...

    As far I can see, Coding should be: 0000274

    After coding see wiki here
  17. Replies
    9
    Views
    191

    You write about change in 46 that you did, it is...

    You write about change in 46 that you did, it is similar in 17.

    You can copy and insert this as new Coding in 17 Instrument.
    Byte 14 Bit 7 is unchecked:
    242D30C0BA8200080120ECC41000001000000000
  18. Replies
    9
    Views
    191

    Try and remove Byte 14 Bit 7 in [17-Instrument]...

    Try and remove Byte 14 Bit 7 in [17-Instrument] Coding, if that change anything.
  19. Post your current Autoscan and Controller Channel...

    Post your current Autoscan and Controller Channel map here.
    Have you been online on erwin, for procedure ?
  20. Replies
    4
    Views
    110

    Please post Autoscan...

    Please post Autoscan

    and Controller Channel map:
    [Applications]
    [Controller Channel Map]
    - Controller Address = 17
    - Login or security code: Leave blank
    - Function: Adaptations
    - Output: CSV...
  21. My VW Up is sending on 0x5D2 every 200 ms on...

    My VW Up is sending on 0x5D2 every 200 ms on powertrain.
    It takes 3 messages for complete VIN

    199.5 05D2 8 01 5A 5A 5A 41 41 5A 44
    399.6 05D2 8 02 44 30 33 37 35 31 38
    600.0 05D2 8 00...
  22. Replies
    4
    Views
    110

    Yes. You need HEX-NET interface.

    Yes.
    You need HEX-NET interface.
  23. Try the new VCDS version from yesterday. There...

    Try the new VCDS version from yesterday.
    There is also Experimental Coding on many controllers.
  24. Replies
    3
    Views
    74

    You have the coding from that car, in the...

    You have the coding from that car, in the Autoscan you made on 20.Sep.
    100200DB006D00B6082900E300D900000000
  25. Replies
    11
    Views
    1,236

    Don't remember, I have both in Danish Label files.

    Don't remember, I have both in Danish Label files.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4