Search:

Type: Posts; User: darkchina811

Page 1 of 17 1 2 3 4

Search: Search took 0.03 seconds.

  1. does anybody have a MQB car with the dimmer...

    does anybody have a MQB car with the dimmer fitted as stock? I am stumbled upon this and I could scans/admaps as an example.
  2. module 17 definitely needs to be coded for BSD...

    module 17 definitely needs to be coded for BSD retrofitting, I did it no longer than two weeks ago but don't have the coding at hand.

    take a look at the "spanish bible" here https://goo.gl/D37qgp...
  3. save the scan and clear the errors, then use your...

    save the scan and clear the errors, then use your car as usual for a couple of days. you only need to worry if they come back, but they probably won't.
  4. Replies
    10
    Views
    138

    cool, but you'll still need to run the basic...

    cool, but you'll still need to run the basic settings after you put it back :D
  5. Replies
    7
    Views
    225

    I installed that to get rid of S&S in my Golf....

    I installed that to get rid of S&S in my Golf. don't know if it's an Arduino, I just know it works perfectly and I forgot it after I set it up. everytime I switch IGN on it disables S&S.

    and yes,...
  6. except that the Rain Closing feature will not...

    except that the Rain Closing feature will not work anymore. it only works with the older sensor. why would you want to replace it?
  7. I saw your private message. I don't have much...

    I saw your private message. I don't have much more insight than what I already shared, in my opinion stop hitting your head on the wall and buy a USED part, possibly from same/similar car. it will...
  8. please do not cut the header from the autoscan,...

    please do not cut the header from the autoscan, also try clearing DTCs to clean it up a bit.

    5G2 941 059 and 5G2 941 060 are the two headlights.

    find a car which has those headlights stock and...
  9. I have of course added the level sensor on the...

    I have of course added the level sensor on the rear suspension, together with module 55. I don't think these headlights can work otherwise.

    I am not totally in love with the low beams always on,...
  10. Replies
    12
    Views
    868

    I completed the retrofit, I ended up using low...

    I completed the retrofit, I ended up using low beams as DRLs as well.
  11. just to follow up, the retrofit is complete now....

    just to follow up, the retrofit is complete now. I ended up using low beams as DRLs as well.
  12. you have a point. the autoscan is here and all...

    you have a point. the autoscan is here and all the adaptation maps are here:

    https://www.dropbox.com/s/pofkgokte2gy04w/NETWORK_JUN132019.zip

    for the record, I tried DISABLING BIT 2 from BYTE 12...
  13. the DATASET errors mean the module is not...

    the DATASET errors mean the module is not parameterized, which is not any news if you bought the item brand new. VCDS cannot fix that, you need the other tool or ODIS online.

    the CANNOT BE REACHED...
  14. MK7 Halo headlight range to cluster illum dimmer

    I am finalizing the retrofit of LED headlights to my Golf 7, I had halogens as stock. Halogens had a manual height adjustment next to the light switch, please see picture:
    ...
  15. Replies
    7
    Views
    346

    I also bought the hub with 3 outputs, part number...

    I also bought the hub with 3 outputs, part number ends with D. as soon as I receive the HSD cables I will test outputs functionality.
  16. what version of LED headlight did you buy? Golf...

    what version of LED headlight did you buy? Golf 7.5 has more than one.

    please post a full autoscan of your car.

    WD for you VIN you can get on erwin by buying just one hour access.
  17. Replies
    16
    Views
    1,422

    ok after some time I took that leap of faith and...

    ok after some time I took that leap of faith and pulled the door panels. I was prepared for a bigger headache but it was not that bad. those clips are nasty, some won't just come off the door side...
  18. well tonight I went for a movie and when I came...

    well tonight I went for a movie and when I came back home I was able to clear the error, so maybe the car needed to drive a bit after the installation.

    however, after checking reference scans I...
  19. Error in module 10 after BSD retrofit

    hello all, I finally completed the retrofit of the Blind Spot Detection on my Golf. I cannot clear the error in module 10, I think there is a wrong coding somewhere. I looked around even with...
  20. of course O-rings are replaced at every filter...

    of course O-rings are replaced at every filter change. here in Europe all you need is to buy a MANN filter, new O-rings come together in the box.
  21. my single USB port is now green HSD, so I can...

    my single USB port is now green HSD, so I can replug that to the hub. sweet.

    I don't have Elsa, I have WD for my VIN from Erwin and it does not say about the HSD color, they all are "T5xy, 5pin...
  22. USB hub retrofit on MQB / HSD cables source

    my Golf 7 head unit is a Composition Media 3Q0 035 824 B, I am planning to retrofit the USB hub 5G0 035 953 D. I am a little confused with connections.
    as of now (stock) I only have one USB port in...
  23. Replies
    5
    Views
    194

    isn't it a shame to tow anything with an A8?

    isn't it a shame to tow anything with an A8?
  24. I know better now. all these issues are because...

    I know better now. all these issues are because when dealer clears out the CP, then they are somehow unable to restore FeC codes. I also had my gateway fixed remotely, but honestly not by Jack. after...
  25. Replies
    7
    Views
    180

    you can buy one hour of access on Erwin, input...

    you can buy one hour of access on Erwin, input your VIN and get WD for your Caddy.

    you will not find RCA outputs behind the OEM unit, you'll have to tap into a speaker-level signal.

    maybe you...
Results 1 to 25 of 412
Page 1 of 17 1 2 3 4