Search:

Type: Posts; User: downtime

Page 1 of 20 1 2 3 4

Search: Search took 0.09 seconds.

  1. Yes it’s possible to code which cameras are...

    Yes it’s possible to code which cameras are connected. When you plug. Hex v2 it gives you the experimental coding option. With that you can see the explanations to the bits :)
  2. Try them if they’re cheap. You won’t lose that...

    Try them if they’re cheap. You won’t lose that much.

    It is possible to have systems in these cars which were not available from factory. We have BSD and park assist in our Leon. Neither was an...
  3. I have black mirror caps as well :) they fit...

    I have black mirror caps as well :) they fit white R-Line perfectly.
  4. Just finished calibrating the system. It was...

    Just finished calibrating the system. It was worth it, the 360 view is now much more consistent. There were some small gaps in the around view picture that probably were caused by the small...
  5. And this procedure from RT Wiki does not work ?...

    And this procedure from RT Wiki does not work ?



    Steering Limit Stop Adaptation
    (Engine still running)

    Center steering wheel (10) and hold it centered for 5 seconds.
    Turn steering wheel...
  6. New autoscan after successful Area view retrofit...

    New autoscan after successful Area view retrofit



    Friday,05,June,2020,10:58:59:18875
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
    VCDS Version: 20.4.1.0 (x64) HEX-V2 CB:...
  7. It should. Diskoboy has installed area view to...

    It should. Diskoboy has installed area view to his Touran and for that area view was not available either. He used parts from Passat for that. So mixing parts from different models should be no...
  8. I'm not sure either myself how I fixed it :) I...

    I'm not sure either myself how I fixed it :) I just connected the module to infotainment CAN bus instead of Drive CAN bus and it started communicating. After that I changed the CAN connection back...
  9. IT WORKS! I don't know what was the thing that...

    IT WORKS! I don't know what was the thing that made it work. I made a jumper CAN cable and attached the CAN to infotainment CAN instead of running gear. Bingo, unit responded immediately. Then I...
  10. I give up with this module. I've tried basically...

    I give up with this module. I've tried basically everything and the module just does not want to communicate. So I have to believe that the area view module itself is busted. There's no other...
  11. Hahaha... I will take some. I don't have any...

    Hahaha... I will take some. I don't have any pictures from the installation. Only from the door connectors. I'll take pictures of the finished product when I get this one working. I promise :)
  12. �� I wish I’ve had done the same��

    �� I wish I’ve had done the same��
  13. All components installed and wired, but I cannot...

    All components installed and wired, but I cannot connect to area view unit. Measured that there is power and ground to the area view connector block. CAN should be fine as well. I'm suspecting...
  14. Replies
    28
    Views
    589

    I’ve seen some of these specialist selling...

    I’ve seen some of these specialist selling developer keys. If you have bad luck and you get blacklisted key, your car VIN might get banned from mothership server which means no CP nor IMMO jobs for...
  15. Replies
    28
    Views
    589

    Enough if you calibrate it at normal room...

    Enough if you calibrate it at normal room lighting. They don’t calibrate that for both in workshop either.

    You can get the VAS boards printed from Aliexpress as well. The front camera cal board...
  16. Ok new door connectors fitted to passenger side....

    Ok new door connectors fitted to passenger side. However, not much use if the aliexpress wiring set needs crimping the pins and using standard VAG connectors.

    The OEM door connector housings have...
  17. Replies
    6
    Views
    116

    Is there a need for security access login first...

    Is there a need for security access login first before running the vehicle data learning procedure?
  18. Replies
    6
    Views
    116

    Edit, no dealer needed, for the error below check...

    Edit, no dealer needed, for the error below check this one:
    http://wiki.ross-tech.com/wiki/index.php/01794

    I think you need to fix this first to get any coding in.
    '


    01794 - Control Module...
  19. Yes, newer cars have 4B multifunction module that...

    Yes, newer cars have 4B multifunction module that controls the lights. I have 2017 Tiguan which still has 55. Both work and according to some here, 55 is easier to retrofit and code than 4B. And yes,...
  20. Also module 55 headlight range is not visible so...

    Also module 55 headlight range is not visible so it's not communicating. Either no power supply, ground or can wires not connected.
  21. Replies
    21
    Views
    799

    Software does not help you. You need online...

    Software does not help you. You need online access to VW servers to be able to adapt the ECU and immobilizer. So a dealer job.
  22. Ok. I would start by fixing the gateway...

    Ok. I would start by fixing the gateway installation list. Remove 37 navigation, 56 radio and add 5F multimedia unit. See if that makes the situation any better.
    Clear all DTCs. Run a fresh autoscan...
  23. Replies
    6
    Views
    134

    Dealer job to remove CP. What comes to...

    Dealer job to remove CP.

    What comes to original ACC module. Faulty module?
  24. What kind of wiring harness you have?

    What kind of wiring harness you have?
  25. I agree :) even when you use part number...

    I agree :) even when you use part number directly, it finds nothing. Then you search for a connector as an example, it suddenly shows you the parts you were looking for.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4