Search:

Type: Posts; User: siLc

Page 1 of 17 1 2 3 4

Search: Search took 0.03 seconds.

  1. Replies
    3
    Views
    34

    There is another thread here where a different...

    There is another thread here where a different MQB platform car lost its drive mode FeC after learning keys. The dealer will have to fix it.
    ...
  2. Thread: boot wont open

    by siLc
    Replies
    8
    Views
    77

    There is a mechanical release on the inside....

    There is a mechanical release on the inside. Remove a small circular flap from lower rear lid trim and you'll see a small handle to push to one side.
  3. Replies
    4
    Views
    87

    The basic MMI radio on an early A3 8V has BT as...

    The basic MMI radio on an early A3 8V has BT as an option, so I'd guess the BT hardware is there but its disabled and can be activated at the dealer for a sum of money.
  4. Replies
    10
    Views
    164

    This is because the supercharger magnetic clutch...

    This is because the supercharger magnetic clutch will have to disengage at 4000rpm. The turbo takes over at that point.

    Find and fix the electrical fault, probably in engine harness and you should...
  5. Replies
    16
    Views
    237

    Unrelated but to take full advantage of DLA...

    Unrelated but to take full advantage of DLA lights, you would also need to retrofit the front camera.
  6. The functions of 46 are carried out by 09 and 46...

    The functions of 46 are carried out by 09 and 46 appears in the installation list as a "virtual" module. Its like its supposed to be.
  7. Well, that pretty much gave it away :D This...

    Well, that pretty much gave it away :D

    This kit you linked is not for your vehicle as Mk7.5 uses a different module for this.
  8. Replies
    2
    Views
    97

    The electronic steering column lock is a part of...

    The electronic steering column lock is a part of the immobilizer - just swapping the part out willy-nilly will put one in this situation. This is a dealer-only affair, if I'm not mistaken.
  9. Replies
    7
    Views
    205

    When talking about MIB2 PQ, the AID is out of the...

    When talking about MIB2 PQ, the AID is out of the question because no PQ platform car has has it ;)
  10. Replies
    7
    Views
    205

    We’re gonna need an autoscan of the vehicle for...

    We’re gonna need an autoscan of the vehicle for this and an admap of 5F.
  11. I'm not sure this 5KD035726A is correct for USB1....

    I'm not sure this 5KD035726A is correct for USB1. Without a hub and with CarPlay, the 5G0035222E is correct but I used 5G0035222 / 5Q0035726 for hub USB1. You can use the classic yellow and green...
  12. Have a look at this ->...

    Have a look at this -> https://forums.ross-tech.com/showthread.php?18643-Discover-Media-PQ-USB-hub-retrofit and enable the RHMI adaptation.

    What USB ports did you use? What HSD cables did you use...
  13. Replies
    10
    Views
    269

    Mind posting a fresh autoscan after fixing the...

    Mind posting a fresh autoscan after fixing the problem?
  14. 550€? That is a realllly steep price...and with a...

    550€? That is a realllly steep price...and with a long drive? Where in France are you, if I may ask?
  15. Replies
    16
    Views
    428

    Almost every module's part number begins with 8W...

    Almost every module's part number begins with 8W in the vehicle's autoscan.

    Chassis type at the start of every autoscan used to be a good indicator of the vehicle model but it no longer is...
  16. Replies
    9
    Views
    231

    The fault codes in the transmission pretty much...

    The fault codes in the transmission pretty much tell the tale of the common mechatronic fault of the DQ200 DSG. The pressure accumulator valve housing inside the mechatronic develops cracks and...
  17. Replies
    16
    Views
    428

    A4 B9 is otherwise known as "Type 8W". You'll see...

    A4 B9 is otherwise known as "Type 8W". You'll see it many modules of your own autoscan.
  18. Replies
    6
    Views
    587

    The rear DCC sensor should be bolted down. If the...

    The rear DCC sensor should be bolted down. If the DCC controller plug is smashed up, you can probably salvage the connector pins inside it and buy a new plug. Wiring itself should be doable with a...
  19. By posting your autoscan, you made it possible...

    By posting your autoscan, you made it possible for us to see whats installed in the car, and with hadez16's CodingCompare tool and a custom label file for the A5 front camera, come up with a coding...
  20. A5 coding should be...

    A5 coding should be 000408020000040100061344C050A10094000E200020

    Since this vehicle has 5F navi and PLA 3.0, PSD (Byte 10), VZE (Byte 16, Bit 4) and PLA can also be coded in A5.
  21. It would be wise to finish installation and...

    It would be wise to finish installation and coding before attempting calibration. Also the camera software is really old - if you can, have it updated to at least revision F (3Q0 980 654F) or later.
  22. "Fighting" the CAN gateway on a B8 is relatively...

    "Fighting" the CAN gateway on a B8 is relatively easy compared to a B7 :)
  23. Factory fuse location for the front camera is...

    Factory fuse location for the front camera is SC32. This fuse position is shared with ACC radar and parking aid module. If you only want to add the front camera and want to save time, I'd suggest...
  24. Replies
    292
    Views
    149,900

    The tow bar itself may be rated for such and such...

    The tow bar itself may be rated for such and such but another thing is how much the particular vehicle model is rated to tow? This varies from engine to engine, with the 2.0 TDI usually being rated...
  25. The upper A-pillar trim clip is a one-time use...

    The upper A-pillar trim clip is a one-time use part. Simply buy a new one from a dealer. Part number 3G0867280, ~1,8€ a piece.
Results 1 to 25 of 424
Page 1 of 17 1 2 3 4