Search:

Type: Posts; User: gnuttisch

Search: Search took 0.01 seconds.

  1. Thanks all for you help!

    Thanks all for you help!
  2. So it shuld look like this? ...

    So it shuld look like this?

    https://ibb.co/gtczHw2
    https://i.ibb.co/L9snb6F/prtscr1.png

    the reason i ask is that I have problem with the smart light assistant and was going to look at the...
  3. But i cant change anything in coding menu,...

    But i cant change anything in coding menu, because their is bi bytes and bits.
  4. Long coding bytes and bits are empty whit an warning?

    Hi,

    Got an Skoda superb 2017 and got empty blocks, any ide? As you see the coding part is just zeros.

    Regards

    Address 09: Cent. Elect. (J519) Labels:. 5Q0-937-08X-V2.clb
    Part No...
  5. Ok, so I have attached an picture of my comfort...

    Ok, so I have attached an picture of my comfort module and where I found the fault. Its down to the left.
    And here you can find the datasheet for the ST chip VND830E...
  6. Okey, So I will post an follow up so that it...

    Okey,

    So I will post an follow up so that it might help others.

    At the last time I disconnected the wire at the brake light because I didnt have the time to fix the issue at the moment, result...
  7. Hi, I will check that when I get home, but I...

    Hi,

    I will check that when I get home, but I think that it is unlikly cause all wire looms are xtra isolated with isolation tape so that it will reduce noises.
  8. I have now checked the wiring schema for my car...

    I have now checked the wiring schema for my car and the hot wire goes directly to my comfort module, only passing connection T10ab. So it has to be my comfort module that have braked down and cant...
  9. okj so here is some additional information. I...

    okj so here is some additional information.

    I measured at the contact to the light and found that it was steady 12v on pin 1 when the car was off. So i dismounted that pin and hooked it into the...
  10. Hi, Thanks for your all replies. Its is...

    Hi,

    Thanks for your all replies.

    Its is only the left rear light, the one that is mounted to the hatch.
    I removed the entire lamp but I couldn't see any signes of corrosion or water.
    And It...
  11. Audi a6 avant 2.0 tdi -11 left rear light wont turn off

    Hi

    I have an audi a6 avant 2.0 tdi -11 that the rear light sometimes flashes or stays steady on when the car is turned off. Then it can suddenly disappear after some time without and fault codes...
  12. Okej, So I have found what I where doing...

    Okej,

    So I have found what I where doing wrong.

    I had to set "Fixed oil service reset (rest of the world)" and "Time based service reset (rest of the world / great britain)"

    Then All...
  13. Hi, Like this? Regards Address 17:...

    Hi,

    Like this?

    Regards



    Address 17: Instruments (J285) Labels: 4F0-920-xxx-17.clb
    Part No SW: 4F0 920 901 N HW: 4F0 920 901 N
  14. audi a6 tdi -11 cant reset service reminder

    Hi

    Using VCDS and following this guide, http://www.ross-tech.com/vcds/tour/sri-reset.php I cant manage to reset the service reminder. VCDS resets all data and according to VCDS their should not be...
Results 1 to 14 of 14